November 15, 2026 · R25–R29 working issue
Current full 3D and measured design review
No new design photograph, native design render or owner approval. Preferred alcohol bar, floated loveseat, larger upholstered chair and parked matching wooden chairs remain. Oriel stays preferred pending Nada; Option C is a separate fallback.
v25 measurement-book addendum
Six missing Muskoka support assembly envelopes now follow the actual A102 footprints and S102 member identities. The short posts retain their differing scheduled lengths. Tall outer supports span both floor levels. These are source-traced overall envelopes: dressed shafts, plates and joinery remain unqualified.
The A200 front elevation dimensions the knee wall at 4 feet; the old 3-foot proxy is corrected. Wall-plane dimensions now match the printed 148.625 × 141.625 inches. South and north infill use the nominal 7.875-inch profile; the west weatherwall profile remains inferred. Thin schematic screen surfaces replace thick glazing proxies. The same-floor interface remains level. Existing furniture and finishes are preserved; the unselected single-door assembly moves rigidly to the corrected south plane.
Wall/infill planes, projecting post faces, nominal timber sections, drawn footprints and total cut lengths are separate quantities. The source cut lengths include associated plates. Numeric envelope checks do not establish engineered capacity or fabrication details.
The historic 155-square-foot room label is not yet reconciled with the printed dimension chains and their area boundary. It is not used to force the room size. Wall-plane, occupied-floor and gross areas remain different quantities.
What the checks establish
460 frozen T1/T2/T3/T9 transition frames cover 23 spaces and five configurations with 234 controls. Changed Muskoka quantities are mandatory; unchanged wall quantities use random samples. A missing source-locator metadata error was corrected with every seed, selected ID, expected value, tolerance and measured value retained. Original rejected receipts remain available. All whole-room gates stay held for incomplete independent source/operation coverage and required unknowns.
Each state also passes renewed actual checks of 17 door units/19 panels, 35 window frames, 38 apertures, 14 product envelopes and 11 typed chains. There are 41 passing critical roof/steel/chair/curtain checks and five unknowns. 171 fixed door-motion poses per state show no modeled-static penetration; occupied operation, handles and simultaneous movement remain unqualified. Earlier bathroom/source-chain and mechanical-wall conflicts remain open.
This HTML/23-room register is the current addendum to the dated v23 Edition 2 PDF. That preserved PDF does not depict v24/v25 corrections and is not a fully validated design book.
Current room source register · Muskoka geometry and explicit estimates · Frozen samples and observers · Actual regressions · Draft questions — nothing sent
Bedroom 1 · Chris
Source/model qualification: HELD.
- Architectural Bedroom1 is Chris; Meghan concept Bedroom2. Manufacturer/fixture positions are design studies; bedroom gas decision remains open.
Room evidence JSON
{
"id": "bedroom1",
"title": "Bedroom 1 · Chris",
"level": "main",
"source_aliases": [
"Chris bedroom",
"Meghan concept Bedroom2"
],
"primary_plan_context": [
{
"sheet": "A102",
"page": 85
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [
8
],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [
"W105",
"W106",
"E100",
"TW100",
"TW101",
"TW102"
],
"adjoining_wall_inventory": [
"bed-east",
"bed1-south-partition",
"bed-north",
"hall-west",
"nook-south"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "bedroom1.main-ceiling",
"room": "bedroom1",
"level": "main",
"plane_world_z_equals_ax_by_c": [
0.08333333333333333,
0,
267.511666666667
],
"quantity_type": "finished ceiling underside",
"basis": "Shared source-registered A103/A300bedroom-wing R2slope; independent132.125/151.375in source stations and1:12pitch.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"Architectural Bedroom1 is Chris; Meghan concept Bedroom2. Manufacturer/fixture positions are design studies; bedroom gas decision remains open."
],
"model_census_by_state": {
"alcohol": {
"faces": 2196,
"object_records": 18
},
"espresso": {
"faces": 2196,
"object_records": 18
},
"espresso-open": {
"faces": 2196,
"object_records": 18
},
"alcohol-open": {
"faces": 2196,
"object_records": 18
},
"espresso-operating": {
"faces": 2196,
"object_records": 18
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Bedroom 2 · Michelle
Source/model qualification: HELD.
- Architectural Bedroom2 is Michelle; Meghan concept Bedroom1. Current nominal finished219.875x156in replaces the oversized old core-only room.
Room evidence JSON
{
"id": "bedroom2",
"title": "Bedroom 2 · Michelle",
"level": "main",
"source_aliases": [
"Michelle bedroom",
"Meghan concept Bedroom1"
],
"primary_plan_context": [
{
"sheet": "A102",
"page": 85
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [
7
],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [
"W100",
"W101",
"W102"
],
"adjoining_wall_inventory": [
"bed-east",
"bed-south",
"bed2-west",
"bed2-south-partition",
"hall-west",
"powder-boot-south"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "bedroom2.main-ceiling",
"room": "bedroom2",
"level": "main",
"plane_world_z_equals_ax_by_c": [
0.08333333333333333,
0,
267.511666666667
],
"quantity_type": "finished ceiling underside",
"basis": "Shared source-registered A103/A300bedroom-wing R2slope; independent132.125/151.375in source stations and1:12pitch.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"Architectural Bedroom2 is Michelle; Meghan concept Bedroom1. Current nominal finished219.875x156in replaces the oversized old core-only room."
],
"model_census_by_state": {
"alcohol": {
"faces": 1626,
"object_records": 15
},
"espresso": {
"faces": 1626,
"object_records": 15
},
"espresso-open": {
"faces": 1626,
"object_records": 15
},
"alcohol-open": {
"faces": 1626,
"object_records": 15
},
"espresso-operating": {
"faces": 1626,
"object_records": 15
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Primary bathroom
Source/model qualification: HELD.
- November3 I104supersedes earlier wet/WC layouts;149.5x138in clear room, registered without scaling. Source42.875in is glass-face clearance;40.75in is half-wall floor clearance.
- Common sloped wing ceiling replaces unsupported108.4536in flat proxy. Lower wet enclosure retained.
- FAIL/coordination: I104south finishY332.35 versus earlier shellY332.47;0.12in offset remains explicit. Final tile/backing registration must reconcile; no arbitrary fixture rescale.
Room evidence JSON
{
"id": "primary-bathroom",
"title": "Primary bathroom",
"level": "main",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A102",
"page": 85
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [
6
],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [
"W103",
"W104"
],
"adjoining_wall_inventory": [
"bed-east",
"bed2-south-partition",
"bed1-south-partition",
"bath-hall-nov03",
"primary-WC-west",
"primary-WC-front"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "primary-bathroom.main-ceiling",
"room": "primary-bathroom",
"level": "main",
"plane_world_z_equals_ax_by_c": [
0.08333333333333333,
0,
267.511666666667
],
"quantity_type": "finished ceiling underside",
"basis": "Shared source-registered A103/A300bedroom-wing R2slope; independent132.125/151.375in source stations and1:12pitch.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": "GreatRoomalso has centralR1approach/side ceilings; primary bath has lower wet enclosure. Read scoped controls, not a single-room height."
}
],
"later_changes_and_reconciliation": [
"November3 I104supersedes earlier wet/WC layouts;149.5x138in clear room, registered without scaling. Source42.875in is glass-face clearance;40.75in is half-wall floor clearance.",
"Common sloped wing ceiling replaces unsupported108.4536in flat proxy. Lower wet enclosure retained.",
"FAIL/coordination: I104south finishY332.35 versus earlier shellY332.47;0.12in offset remains explicit. Final tile/backing registration must reconcile; no arbitrary fixture rescale."
],
"model_census_by_state": {
"alcohol": {
"faces": 5487,
"object_records": 115
},
"espresso": {
"faces": 5487,
"object_records": 115
},
"espresso-open": {
"faces": 5487,
"object_records": 115
},
"alcohol-open": {
"faces": 5487,
"object_records": 115
},
"espresso-operating": {
"faces": 5487,
"object_records": 115
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Main hall & bedroom thresholds
Source/model qualification: HELD.
- Later I104hall partition registration retained. Door heads/leaf/hardware fit and whole finished-floor build-up remain unconfirmed.
- I104 source opening centre217.72in and north/positive-Y pocket travel supersede inherited label/axis position and wrong pocket direction. I100/I103 use the registered206.92in centres. Installation allowances remain inferred.
Room evidence JSON
{
"id": "main-hall",
"title": "Main hall & bedroom thresholds",
"level": "main",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A102",
"page": 85
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [],
"adjoining_wall_inventory": [
"bed2-south-partition",
"bed1-south-partition",
"hall-west",
"powder-north",
"bath-hall-nov03"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "main-hall.main-ceiling",
"room": "main-hall",
"level": "main",
"plane_world_z_equals_ax_by_c": [
0.08333333333333333,
0,
267.511666666667
],
"quantity_type": "finished ceiling underside",
"basis": "Shared source-registered A103/A300bedroom-wing R2slope; independent132.125/151.375in source stations and1:12pitch.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"Later I104hall partition registration retained. Door heads/leaf/hardware fit and whole finished-floor build-up remain unconfirmed.",
"I104 source opening centre217.72in and north/positive-Y pocket travel supersede inherited label/axis position and wrong pocket direction. I100/I103 use the registered206.92in centres. Installation allowances remain inferred."
],
"model_census_by_state": {
"alcohol": {
"faces": 124,
"object_records": 3
},
"espresso": {
"faces": 124,
"object_records": 3
},
"espresso-open": {
"faces": 124,
"object_records": 3
},
"alcohol-open": {
"faces": 124,
"object_records": 3
},
"espresso-operating": {
"faces": 124,
"object_records": 3
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Powder room
Source/model qualification: HELD.
- Nominal finished assemblies reconciled; vanity rigidly moved0.51in to fit. Plumbing selection and installed clearances remain open.
- I105 actual source jambsPDF723.96-768.96 place centreX301.8in,12.84in from the inherited displaced axis. The obsolete hole is closed and the30x96in panel clears the unchanged vanity; no invented furniture resize.
Room evidence JSON
{
"id": "powder-room",
"title": "Powder room",
"level": "main",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A102",
"page": 85
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [
5
],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [
"W111"
],
"adjoining_wall_inventory": [
"bed2-west",
"bed2-south-partition",
"hall-west",
"powder-boot-south",
"powder-boot",
"powder-north"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "powder-room.main-ceiling",
"room": "powder-room",
"level": "main",
"plane_world_z_equals_ax_by_c": [
0,
0,
256.125
],
"quantity_type": "finished ceiling underside",
"basis": "A300centralR1finished-ceiling118.125in; Muskoka underside beam is separately108.5in above main.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"Nominal finished assemblies reconciled; vanity rigidly moved0.51in to fit. Plumbing selection and installed clearances remain open.",
"I105 actual source jambsPDF723.96-768.96 place centreX301.8in,12.84in from the inherited displaced axis. The obsolete hole is closed and the30x96in panel clears the unchanged vanity; no invented furniture resize."
],
"model_census_by_state": {
"alcohol": {
"faces": 523,
"object_records": 4
},
"espresso": {
"faces": 523,
"object_records": 4
},
"espresso-open": {
"faces": 523,
"object_records": 4
},
"alcohol-open": {
"faces": 523,
"object_records": 4
},
"espresso-operating": {
"faces": 523,
"object_records": 4
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Boot room / mudroom storage
Source/model qualification: HELD.
- Stone entry finish continues through muddy-boot removal area under owner direction. E5east envelope/outward side corrected; actual printed61in clear control passes. Cabinetry is custom proposed fit.
Room evidence JSON
{
"id": "boot-room",
"title": "Boot room / mudroom storage",
"level": "main",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A102",
"page": 85
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [
3
],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [
"W110"
],
"adjoining_wall_inventory": [
"powder-boot-south",
"powder-boot",
"powder-north",
"entry-south",
"entry-porch-east"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "boot-room.main-ceiling",
"room": "boot-room",
"level": "main",
"plane_world_z_equals_ax_by_c": [
0,
0,
256.125
],
"quantity_type": "finished ceiling underside",
"basis": "A300centralR1finished-ceiling118.125in; Muskoka underside beam is separately108.5in above main.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"Stone entry finish continues through muddy-boot removal area under owner direction. E5east envelope/outward side corrected; actual printed61in clear control passes. Cabinetry is custom proposed fit."
],
"model_census_by_state": {
"alcohol": {
"faces": 3512,
"object_records": 3
},
"espresso": {
"faces": 3512,
"object_records": 3
},
"espresso-open": {
"faces": 3512,
"object_records": 3
},
"alcohol-open": {
"faces": 3512,
"object_records": 3
},
"espresso-operating": {
"faces": 3512,
"object_records": 3
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Main entry
Source/model qualification: HELD.
- Intentional flush ceiling at proposedSB104underside113.39in above nominal main; structure/finish/services junction needs Nada/Alyssa.
- Fluted glass with amber/olive insert retained as appearance direction. Support, stability, attachment and entrance visibility remain design/engineering checks.
Room evidence JSON
{
"id": "entry",
"title": "Main entry",
"level": "main",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A102",
"page": 85
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [
3
],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [],
"adjoining_wall_inventory": [
"bed2-south-partition",
"hall-west",
"powder-boot",
"powder-north",
"entry-south",
"entry-porch-east",
"entry-porch-west"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "entry.main-ceiling",
"room": "entry",
"level": "main",
"plane_world_z_equals_ax_by_c": [
0,
0,
251.39
],
"quantity_type": "finished ceiling underside",
"basis": "Explicit proposed full/flush treatment at correctedSB104underside; owner intent plus131.5in steel top minus source18.11in profile. Services/lining/anchorage remain open.",
"source_class": "Explicit proposed coordination plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"Intentional flush ceiling at proposedSB104underside113.39in above nominal main; structure/finish/services junction needs Nada/Alyssa.",
"Fluted glass with amber/olive insert retained as appearance direction. Support, stability, attachment and entrance visibility remain design/engineering checks."
],
"model_census_by_state": {
"alcohol": {
"faces": 99,
"object_records": 1
},
"espresso": {
"faces": 99,
"object_records": 1
},
"espresso-open": {
"faces": 99,
"object_records": 1
},
"alcohol-open": {
"faces": 99,
"object_records": 1
},
"espresso-operating": {
"faces": 99,
"object_records": 1
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Kitchen
Source/model qualification: HELD.
- Black tapware direction retained; source E1outward side corrected without shrinking pantry. Existing island/stool programme remains a design proposal, not a millwork shop drawing.
- Source-sized stools corrected. Appliance/counter-fridge selections and operating/service clearances remain open.
Room evidence JSON
{
"id": "kitchen",
"title": "Kitchen",
"level": "main",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A102",
"page": 85
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [
2
],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [
"W112"
],
"adjoining_wall_inventory": [
"entry-south",
"entry-porch-west",
"registered-west-E1",
"registered-kitchen-south-E1"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "kitchen.main-ceiling",
"room": "kitchen",
"level": "main",
"plane_world_z_equals_ax_by_c": [
0,
0,
251.39
],
"quantity_type": "finished ceiling underside",
"basis": "Explicit proposed full/flush treatment at correctedSB104underside; owner intent plus131.5in steel top minus source18.11in profile. Services/lining/anchorage remain open.",
"source_class": "Explicit proposed coordination plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"Black tapware direction retained; source E1outward side corrected without shrinking pantry. Existing island/stool programme remains a design proposal, not a millwork shop drawing.",
"Source-sized stools corrected. Appliance/counter-fridge selections and operating/service clearances remain open."
],
"model_census_by_state": {
"alcohol": {
"faces": 2253,
"object_records": 518
},
"espresso": {
"faces": 2253,
"object_records": 518
},
"espresso-open": {
"faces": 2253,
"object_records": 518
},
"alcohol-open": {
"faces": 2253,
"object_records": 518
},
"espresso-operating": {
"faces": 2253,
"object_records": 518
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Great room · living, dining & cozy nook
Source/model qualification: HELD.
- Current full model has sloped R2living ceiling, corrected scheduled SB103/SB104,589mm horizontal curtain-bank gap and63.5mm vertical gap.
- Larger Swoon/floated loveseat preference retained. Real143x67cm Mikado table is parallel to sofa; owned matching JH501pair remain parked overflow.
- Alcohol is default. Five complete bar states retained; full conversion/loaded runners/electrical/steam/heat and cabinet support still require actual operation checks.
- Nook preferred small Oriel72x72/20in projection remains pending Nada; quote side/centre/depth reconciliation unresolved. OptionCis separate fallback. Rumford configuration unchanged.
- Bookcase colours/materials remain on hold in later November12record; do not promote earlier appearance to final material selection.
- I110 is the nook passage. Printed34.625in width restores the inferred return; current R1head118.125in is distinct from original120in schedule. I109kitchen width278.875in/current proposed flush head113.39in is separate. Earlier book association ofI110with entry/kitchen is superseded.
Room evidence JSON
{
"id": "greatroom",
"title": "Great room · living, dining & cozy nook",
"level": "main",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A102",
"page": 85
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [
4
],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [
"W109",
"TW106",
"TW107",
"TW105",
"TW104",
"TW103",
"CW-west-lower",
"CW-west-upper",
"CW-east-lower",
"CW-east-upper",
"W108"
],
"adjoining_wall_inventory": [
"hall-west",
"nook-south",
"nook-west",
"registered-west-E1",
"registered-lake-E1"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "greatroom.main-ceiling",
"room": "greatroom",
"level": "main",
"plane_world_z_equals_ax_by_c": [
-0.08333333333333333,
0,
346.206666666667
],
"quantity_type": "finished ceiling underside",
"basis": "A103/A300R2main living slope, independently reconciled148.5/176.125in finished-ceiling stations; source precision retained.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": true,
"additional_regions": "GreatRoomalso has centralR1approach/side ceilings; primary bath has lower wet enclosure. Read scoped controls, not a single-room height."
}
],
"later_changes_and_reconciliation": [
"Current full model has sloped R2living ceiling, corrected scheduled SB103/SB104,589mm horizontal curtain-bank gap and63.5mm vertical gap.",
"Larger Swoon/floated loveseat preference retained. Real143x67cm Mikado table is parallel to sofa; owned matching JH501pair remain parked overflow.",
"Alcohol is default. Five complete bar states retained; full conversion/loaded runners/electrical/steam/heat and cabinet support still require actual operation checks.",
"Nook preferred small Oriel72x72/20in projection remains pending Nada; quote side/centre/depth reconciliation unresolved. OptionCis separate fallback. Rumford configuration unchanged.",
"Bookcase colours/materials remain on hold in later November12record; do not promote earlier appearance to final material selection.",
"I110 is the nook passage. Printed34.625in width restores the inferred return; current R1head118.125in is distinct from original120in schedule. I109kitchen width278.875in/current proposed flush head113.39in is separate. Earlier book association ofI110with entry/kitchen is superseded."
],
"model_census_by_state": {
"alcohol": {
"faces": 38927,
"object_records": 602
},
"espresso": {
"faces": 38915,
"object_records": 602
},
"espresso-open": {
"faces": 38932,
"object_records": 603
},
"alcohol-open": {
"faces": 38944,
"object_records": 603
},
"espresso-operating": {
"faces": 38915,
"object_records": 602
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Three-season Muskoka room
Source/model qualification: HELD.
- E101actual rough width131.75in, same main floor and north/lake fold direction. Exact head/sill/track/support and stack-jamb tolerance pending.
- Current single swinging exterior door/collapsible screen follows August18direction forwardedOctober7. Old E102slider is superseded;36x84in/position/profile/80degree swing remain estimates.
- A200front elevation4ft knee wall replaces inherited3ft proxy. A102nominal wall-plane148.625x141.625in and7.875in infill envelope now implemented; west weatherwall profile remains inferred. Thin screen placeholders replace thick glazing proxies; final system unselected.
- Six source-traced timber support assembly envelopes T1/T2/T3/T4/T7/T8 now present. Tall outer envelopes extend lower pier/slab reference0to beam underside246.5worldin; shorter envelopes retain differing scheduled lengths. Nominal8x8source section, drawn7.44–7.52in footprints, total cut length including plates, exact dressed shaft and connections remain different quantities. No fabricated plate/notch qualification.
- Source post-face span138.625in is distinct from wall/infill-plane141.625in. Plan trace and nominal annotation rounding remain visible; original failures/20support frames and37controls retained. Same-floor interface remains0in.
Room evidence JSON
{
"id": "muskoka-room",
"title": "Three-season Muskoka room",
"level": "main",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A102",
"page": 85
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S102",
"page": 94,
"scope": "Required primary main-level support/callout/footprint drawing."
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [],
"adjoining_wall_inventory": [
"registered-west-E1"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "muskoka-room.main-ceiling",
"room": "muskoka-room",
"level": "main",
"plane_world_z_equals_ax_by_c": [
0,
0,
256.125
],
"quantity_type": "finished ceiling underside",
"basis": "A300centralR1finished-ceiling118.125in; Muskoka underside beam is separately108.5in above main.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"E101actual rough width131.75in, same main floor and north/lake fold direction. Exact head/sill/track/support and stack-jamb tolerance pending.",
"Current single swinging exterior door/collapsible screen follows August18direction forwardedOctober7. Old E102slider is superseded;36x84in/position/profile/80degree swing remain estimates.",
"A200front elevation4ft knee wall replaces inherited3ft proxy. A102nominal wall-plane148.625x141.625in and7.875in infill envelope now implemented; west weatherwall profile remains inferred. Thin screen placeholders replace thick glazing proxies; final system unselected.",
"Six source-traced timber support assembly envelopes T1/T2/T3/T4/T7/T8 now present. Tall outer envelopes extend lower pier/slab reference0to beam underside246.5worldin; shorter envelopes retain differing scheduled lengths. Nominal8x8source section, drawn7.44–7.52in footprints, total cut length including plates, exact dressed shaft and connections remain different quantities. No fabricated plate/notch qualification.",
"Source post-face span138.625in is distinct from wall/infill-plane141.625in. Plan trace and nominal annotation rounding remain visible; original failures/20support frames and37controls retained. Same-floor interface remains0in."
],
"model_census_by_state": {
"alcohol": {
"faces": 1382,
"object_records": 8
},
"espresso": {
"faces": 1382,
"object_records": 8
},
"espresso-open": {
"faces": 1382,
"object_records": 8
},
"alcohol-open": {
"faces": 1382,
"object_records": 8
},
"espresso-operating": {
"faces": 1382,
"object_records": 8
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null,
"current_Muskoka_assembly_programme": {
"file": "assistant/rooms/interior_studies/2026-11-15-muskoka-corrections-r26/muskoka-programme-v25.json",
"sha256": "4927809f54f07ed85d1f441ba024618180905f6dbf124dc9418d54be2afc183c",
"scope": "Full required primary context is also explicitly bound in this programme; no drawing inventory substitutes for actual sheets."
}
}Mechanical room
Source/model qualification: HELD.
- A101113.375in substrate chain minus separate2in B1gives111.375in occupied clear; do not conflate quantities.
- 15in combined printed chain versus F2+B1nominal15.25in remains a source conflict. Mechanical systems/service clearances unselected.
- I001 is restored to its actual horizontal hall-front wall, with source jambsPDF598.44-652.56. The inherited vertical bath-wall hole is closed. Source panel36x84in; installation profiles inferred.
Room evidence JSON
{
"id": "mechanical-room",
"title": "Mechanical room",
"level": "basement",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A101",
"page": 84
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [],
"adjoining_wall_inventory": [
"foundation-east",
"foundation-south",
"foundation-mech-west",
"mech-bed4",
"mech-hall",
"bath-east",
"hall-bath-north",
"wing-east-B1-lining",
"mech-south-B1-lining"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "mechanical-room.main-ceiling",
"room": "mechanical-room",
"level": "basement",
"plane_world_z_equals_ax_by_c": [
0,
0,
108.0
],
"quantity_type": "finished ceiling underside",
"basis": "A300printed9ft finished basement ceiling; room uses that shared dropped-ceiling plane.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"A101113.375in substrate chain minus separate2in B1gives111.375in occupied clear; do not conflate quantities.",
"15in combined printed chain versus F2+B1nominal15.25in remains a source conflict. Mechanical systems/service clearances unselected.",
"I001 is restored to its actual horizontal hall-front wall, with source jambsPDF598.44-652.56. The inherited vertical bath-wall hole is closed. Source panel36x84in; installation profiles inferred."
],
"model_census_by_state": {
"alcohol": {
"faces": 108,
"object_records": 2
},
"espresso": {
"faces": 108,
"object_records": 2
},
"espresso-open": {
"faces": 108,
"object_records": 2
},
"alcohol-open": {
"faces": 108,
"object_records": 2
},
"espresso-operating": {
"faces": 108,
"object_records": 2
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Bedroom 4
Source/model qualification: HELD.
- Source I2hall/alcove and4.5in bed/ensuite partition assignments reconciled. No newly ordered Harper window belongs here. Wardrobe is custom site-fit proposal.
- I002 source opening centre227in and I003275.6in replace displaced inherited axes. The former bedroom wardrobe block belongs to the hall laundry-chute/hamper access, not a newly selected bedroom wardrobe.
Room evidence JSON
{
"id": "bedroom4",
"title": "Bedroom 4",
"level": "basement",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A101",
"page": 84
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [
"W001"
],
"adjoining_wall_inventory": [
"foundation-east",
"mech-bed4",
"mech-hall",
"bed4-hall",
"bed4-alcove",
"bed4-storage",
"bed4-ensuite",
"wing-east-B1-lining"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "bedroom4.main-ceiling",
"room": "bedroom4",
"level": "basement",
"plane_world_z_equals_ax_by_c": [
0,
0,
108.0
],
"quantity_type": "finished ceiling underside",
"basis": "A300printed9ft finished basement ceiling; room uses that shared dropped-ceiling plane.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"Source I2hall/alcove and4.5in bed/ensuite partition assignments reconciled. No newly ordered Harper window belongs here. Wardrobe is custom site-fit proposal.",
"I002 source opening centre227in and I003275.6in replace displaced inherited axes. The former bedroom wardrobe block belongs to the hall laundry-chute/hamper access, not a newly selected bedroom wardrobe."
],
"model_census_by_state": {
"alcohol": {
"faces": 1340,
"object_records": 5
},
"espresso": {
"faces": 1340,
"object_records": 5
},
"espresso-open": {
"faces": 1340,
"object_records": 5
},
"alcohol-open": {
"faces": 1340,
"object_records": 5
},
"espresso-operating": {
"faces": 1340,
"object_records": 5
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Basement hall
Source/model qualification: HELD.
- I2/I2.1source type arrows and adjoining bathroom/bedroom finish planes reconciled. Hall travel/door swing/threshold sweep still needs full operation acceptance.
- I004 actual centre269in; low-end hinge opens east into hall under the source stair arrangement. Its model panels are source-sized; hardware/profile and occupied travel remain estimated.
- I008 unframed42x84in passage to lower entry re-registered to primary centre227in, with complete finished jamb/soffit and floor coverage. No door panel or structural framing invented.
Room evidence JSON
{
"id": "basement-hall",
"title": "Basement hall",
"level": "basement",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A101",
"page": 84
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [],
"adjoining_wall_inventory": [
"mech-hall",
"hall-bath-north",
"bed4-hall",
"bed4-storage",
"wing-hall"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "basement-hall.main-ceiling",
"room": "basement-hall",
"level": "basement",
"plane_world_z_equals_ax_by_c": [
0,
0,
108.0
],
"quantity_type": "finished ceiling underside",
"basis": "A300printed9ft finished basement ceiling; room uses that shared dropped-ceiling plane.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"I2/I2.1source type arrows and adjoining bathroom/bedroom finish planes reconciled. Hall travel/door swing/threshold sweep still needs full operation acceptance.",
"I004 actual centre269in; low-end hinge opens east into hall under the source stair arrangement. Its model panels are source-sized; hardware/profile and occupied travel remain estimated.",
"I008 unframed42x84in passage to lower entry re-registered to primary centre227in, with complete finished jamb/soffit and floor coverage. No door panel or structural framing invented."
],
"model_census_by_state": {
"alcohol": {
"faces": 97,
"object_records": 8
},
"espresso": {
"faces": 97,
"object_records": 8
},
"espresso-open": {
"faces": 97,
"object_records": 8
},
"alcohol-open": {
"faces": 97,
"object_records": 8
},
"espresso-operating": {
"faces": 97,
"object_records": 8
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Basement shared bathroom
Source/model qualification: HELD.
- Missing bath/laundry return restored from A101actual paths. Net area62.892SFagrees with rounded63SFsecondary label.
- South B2particular assignment remains inferred. Tub/vanity moved rigidly to fit; final plumbing/fixture and wet installation not selected.
Room evidence JSON
{
"id": "basement-bathroom",
"title": "Basement shared bathroom",
"level": "basement",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A101",
"page": 84
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [
10
],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [],
"adjoining_wall_inventory": [
"foundation-bath-south",
"foundation-entry-east",
"bath-east",
"hall-bath-north",
"bath-south-finish-lining",
"bath-laundry-return"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "basement-bathroom.main-ceiling",
"room": "basement-bathroom",
"level": "basement",
"plane_world_z_equals_ax_by_c": [
0,
0,
108.0
],
"quantity_type": "finished ceiling underside",
"basis": "A300printed9ft finished basement ceiling; room uses that shared dropped-ceiling plane.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"Missing bath/laundry return restored from A101actual paths. Net area62.892SFagrees with rounded63SFsecondary label.",
"South B2particular assignment remains inferred. Tub/vanity moved rigidly to fit; final plumbing/fixture and wet installation not selected."
],
"model_census_by_state": {
"alcohol": {
"faces": 878,
"object_records": 6
},
"espresso": {
"faces": 878,
"object_records": 6
},
"espresso-open": {
"faces": 878,
"object_records": 6
},
"alcohol-open": {
"faces": 878,
"object_records": 6
},
"espresso-operating": {
"faces": 878,
"object_records": 6
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Bedroom 3 ensuite
Source/model qualification: HELD.
- A10166in depth control passes;48x24in vanity rigidly moved beyond B1face. Custom shower/storage fitted to source finish bounds; exact products/plumbing/operation remain open.
- I005 source jambsPDF366.48-411.60 place the nominal30in pocket atX63.52in, not84.16in. Pocket travels east/right. Old misplaced wall hole restored before cutting the current reservation.
Room evidence JSON
{
"id": "ensuite3",
"title": "Bedroom 3 ensuite",
"level": "basement",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A101",
"page": 84
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [
"W002"
],
"adjoining_wall_inventory": [
"foundation-east",
"bed4-ensuite",
"ensuite-wic",
"ensuite-bedroom3",
"wing-east-B1-lining"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "ensuite3.main-ceiling",
"room": "ensuite3",
"level": "basement",
"plane_world_z_equals_ax_by_c": [
0,
0,
108.0
],
"quantity_type": "finished ceiling underside",
"basis": "A300printed9ft finished basement ceiling; room uses that shared dropped-ceiling plane.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"A10166in depth control passes;48x24in vanity rigidly moved beyond B1face. Custom shower/storage fitted to source finish bounds; exact products/plumbing/operation remain open.",
"I005 source jambsPDF366.48-411.60 place the nominal30in pocket atX63.52in, not84.16in. Pocket travels east/right. Old misplaced wall hole restored before cutting the current reservation."
],
"model_census_by_state": {
"alcohol": {
"faces": 582,
"object_records": 13
},
"espresso": {
"faces": 582,
"object_records": 13
},
"espresso-open": {
"faces": 582,
"object_records": 13
},
"alcohol-open": {
"faces": 582,
"object_records": 13
},
"espresso-operating": {
"faces": 582,
"object_records": 13
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Basement walk-in storage
Source/model qualification: HELD.
- Primary partition envelope retained; custom shelves/wardrobes fitted to actual finish faces. Internal working/door/loaded storage dimensions remain proposals.
Room evidence JSON
{
"id": "basement-wic",
"title": "Basement walk-in storage",
"level": "basement",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A101",
"page": 84
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [],
"adjoining_wall_inventory": [
"bed4-ensuite",
"ensuite-wic",
"ensuite-bedroom3",
"wing-hall"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "basement-wic.main-ceiling",
"room": "basement-wic",
"level": "basement",
"plane_world_z_equals_ax_by_c": [
0,
0,
108.0
],
"quantity_type": "finished ceiling underside",
"basis": "A300printed9ft finished basement ceiling; room uses that shared dropped-ceiling plane.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"Primary partition envelope retained; custom shelves/wardrobes fitted to actual finish faces. Internal working/door/loaded storage dimensions remain proposals."
],
"model_census_by_state": {
"alcohol": {
"faces": 198,
"object_records": 2
},
"espresso": {
"faces": 198,
"object_records": 2
},
"espresso-open": {
"faces": 198,
"object_records": 2
},
"alcohol-open": {
"faces": 198,
"object_records": 2
},
"espresso-operating": {
"faces": 198,
"object_records": 2
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Bedroom 3
Source/model qualification: HELD.
- Harper additional woods-facing window: owner authorizes best-information location estimate; centred east wall with proposed matching W002family25x36in/sill48in. Not a tagged order or engineering approval.
- A101213.25in to substrate minus4in B2gives209.25in occupied width;123.25in depth. Approx179.1SFsecondary area agrees with179SFlabel.
Room evidence JSON
{
"id": "bedroom3",
"title": "Bedroom 3",
"level": "basement",
"source_aliases": [
"Harper bedroom"
],
"primary_plan_context": [
{
"sheet": "A101",
"page": 84
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [
"W003",
"EST-B3-WOODS-01"
],
"adjoining_wall_inventory": [
"foundation-east",
"bedroom3-north",
"walkout-north",
"walkout-east",
"ensuite-bedroom3",
"wing-hall",
"wing-east-B1-lining",
"bedroom3-east-B2-lining"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "bedroom3.main-ceiling",
"room": "bedroom3",
"level": "basement",
"plane_world_z_equals_ax_by_c": [
0,
0,
108.0
],
"quantity_type": "finished ceiling underside",
"basis": "A300printed9ft finished basement ceiling; room uses that shared dropped-ceiling plane.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"Harper additional woods-facing window: owner authorizes best-information location estimate; centred east wall with proposed matching W002family25x36in/sill48in. Not a tagged order or engineering approval.",
"A101213.25in to substrate minus4in B2gives209.25in occupied width;123.25in depth. Approx179.1SFsecondary area agrees with179SFlabel."
],
"model_census_by_state": {
"alcohol": {
"faces": 1282,
"object_records": 4
},
"espresso": {
"faces": 1282,
"object_records": 4
},
"espresso-open": {
"faces": 1282,
"object_records": 4
},
"alcohol-open": {
"faces": 1282,
"object_records": 4
},
"espresso-operating": {
"faces": 1282,
"object_records": 4
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Lower entry & stair arrival
Source/model qualification: HELD.
- W007owner alias lower-entry-side window is physically the RecRoom recess casement; no extra RecRoomwindow is invented.
- Basement108in ceiling restored over lower stair region per A102opening. Exact threshold/floor build-up and property-grade transform remain open.
- I008 and I111 are unframed interfaces. I111 nominal104x96in clear passage to RecRoom uses primary centre397.96in; source drawn gap104.08in remains distinct from nominal104in. Source tracing uncertainty +/-0.67in.
Room evidence JSON
{
"id": "lower-entry",
"title": "Lower entry & stair arrival",
"level": "basement",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A101",
"page": 84
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [
"E002"
],
"adjoining_wall_inventory": [
"walkout-north",
"hall-bath-north",
"wing-hall",
"hall-laundry",
"rec-hall"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "lower-entry.main-ceiling",
"room": "lower-entry",
"level": "basement",
"plane_world_z_equals_ax_by_c": [
0,
0,
108.0
],
"quantity_type": "finished ceiling underside",
"basis": "A300printed9ft finished basement ceiling; room uses that shared dropped-ceiling plane.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"W007owner alias lower-entry-side window is physically the RecRoom recess casement; no extra RecRoomwindow is invented.",
"Basement108in ceiling restored over lower stair region per A102opening. Exact threshold/floor build-up and property-grade transform remain open.",
"I008 and I111 are unframed interfaces. I111 nominal104x96in clear passage to RecRoom uses primary centre397.96in; source drawn gap104.08in remains distinct from nominal104in. Source tracing uncertainty +/-0.67in."
],
"model_census_by_state": {
"alcohol": {
"faces": 62,
"object_records": 1
},
"espresso": {
"faces": 62,
"object_records": 1
},
"espresso-open": {
"faces": 62,
"object_records": 1
},
"alcohol-open": {
"faces": 62,
"object_records": 1
},
"espresso-operating": {
"faces": 62,
"object_records": 1
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Basement laundry
Source/model qualification: HELD.
- Actual source bathroom return and north I1partition reconciled; machines moved rigidly0.2in; custom counter/hanging storage fitted. Appliance/service/door operation remains unselected.
- I011/I012 are two34x84in panels in one estimated perimeter pocket frame, without centre posts. Paired set-out translated0.5in within registered trace uncertainty to fit inferred linings; no supplier framing/installation approval.
Room evidence JSON
{
"id": "basement-laundry",
"title": "Basement laundry",
"level": "basement",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A101",
"page": 84
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [
11
],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [],
"adjoining_wall_inventory": [
"foundation-entry-north",
"hall-bath-north",
"hall-laundry",
"laundry-north",
"laundry-media",
"bath-laundry-return"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "basement-laundry.main-ceiling",
"room": "basement-laundry",
"level": "basement",
"plane_world_z_equals_ax_by_c": [
0,
0,
108.0
],
"quantity_type": "finished ceiling underside",
"basis": "A300printed9ft finished basement ceiling; room uses that shared dropped-ceiling plane.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"Actual source bathroom return and north I1partition reconciled; machines moved rigidly0.2in; custom counter/hanging storage fitted. Appliance/service/door operation remains unselected.",
"I011/I012 are two34x84in panels in one estimated perimeter pocket frame, without centre posts. Paired set-out translated0.5in within registered trace uncertainty to fit inferred linings; no supplier framing/installation approval."
],
"model_census_by_state": {
"alcohol": {
"faces": 693,
"object_records": 31
},
"espresso": {
"faces": 693,
"object_records": 31
},
"espresso-open": {
"faces": 693,
"object_records": 31
},
"alcohol-open": {
"faces": 693,
"object_records": 31
},
"espresso-operating": {
"faces": 693,
"object_records": 31
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Golf simulator & media room
Source/model qualification: HELD.
- A101NO DROPPED CEILING: current125in finish study is125.5in framing less inferred0.5in lining. Services/finish thickness open.
- 189.125in width and122.625in substrate depth minus2in B1=120.625in occupied depth. Golf simulator/swing/equipment specifications still need actual-size operational study.
- I010 retains two nominal42x84in allocations and inferred0.75in undercut above unchanged0.52in turf proxy. Full60x60x1.5in mat, monitor and north protective panel are parked clear of door travel, without shrinking them. Proposed storage/rack and deployed simulator/body swing remain unqualified.
Room evidence JSON
{
"id": "media-room",
"title": "Golf simulator & media room",
"level": "basement",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A101",
"page": 84
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [],
"adjoining_wall_inventory": [
"foundation-entry-west",
"foundation-media-south",
"foundation-west",
"laundry-media",
"media-rec",
"media-B1-lining",
"media-south-B1-lining"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "media-room.main-ceiling",
"room": "media-room",
"level": "basement",
"plane_world_z_equals_ax_by_c": [
0,
0,
125.0
],
"quantity_type": "finished ceiling underside",
"basis": "A101no dropped ceiling; A300125.5in framing less explicitly inferred0.5in finish.",
"source_class": "Explicit proposed coordination plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"A101NO DROPPED CEILING: current125in finish study is125.5in framing less inferred0.5in lining. Services/finish thickness open.",
"189.125in width and122.625in substrate depth minus2in B1=120.625in occupied depth. Golf simulator/swing/equipment specifications still need actual-size operational study.",
"I010 retains two nominal42x84in allocations and inferred0.75in undercut above unchanged0.52in turf proxy. Full60x60x1.5in mat, monitor and north protective panel are parked clear of door travel, without shrinking them. Proposed storage/rack and deployed simulator/body swing remain unqualified."
],
"model_census_by_state": {
"alcohol": {
"faces": 173,
"object_records": 4
},
"espresso": {
"faces": 173,
"object_records": 4
},
"espresso-open": {
"faces": 173,
"object_records": 4
},
"alcohol-open": {
"faces": 173,
"object_records": 4
},
"espresso-operating": {
"faces": 173,
"object_records": 4
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Rec room, lounge & stowaway guest bunks
Source/model qualification: HELD.
- 333.375in occupied width is335.375in printed substrate span minus2in B1. Depth222.125in retained; approx514.3SFagrees with rounded514SFsecondary label.
- W007baseline24x72in added in November11programme; updated order/profile not supplied. Interior rec-hall wrongly continued across it; corrected to stop at source walkout-north closure.
- Stowaway bunks/guest/TV fixtures remain design proposals requiring actual products, loaded/occupied operation and final clearances.
- I111 unframed interface has source-centred104x96in void and finished shell returns. RecRoom and lower-entry share this interface; it is not a new door unit.
Room evidence JSON
{
"id": "rec-room",
"title": "Rec room, lounge & stowaway guest bunks",
"level": "basement",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A101",
"page": 84
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [
"W004",
"W005",
"W006",
"E004",
"W007"
],
"adjoining_wall_inventory": [
"foundation-west",
"rec-north",
"walkout-north",
"walkout-west",
"hall-laundry",
"laundry-north",
"media-rec",
"rec-hall",
"rec-B1-lining"
],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [
{
"id": "rec-room.main-ceiling",
"room": "rec-room",
"level": "basement",
"plane_world_z_equals_ax_by_c": [
0,
0,
108.0
],
"quantity_type": "finished ceiling underside",
"basis": "A300printed9ft finished basement ceiling; room uses that shared dropped-ceiling plane.",
"source_class": "Primary source registered nominal plane",
"not_room_boundary": false,
"additional_regions": null
}
],
"later_changes_and_reconciliation": [
"333.375in occupied width is335.375in printed substrate span minus2in B1. Depth222.125in retained; approx514.3SFagrees with rounded514SFsecondary label.",
"W007baseline24x72in added in November11programme; updated order/profile not supplied. Interior rec-hall wrongly continued across it; corrected to stop at source walkout-north closure.",
"Stowaway bunks/guest/TV fixtures remain design proposals requiring actual products, loaded/occupied operation and final clearances.",
"I111 unframed interface has source-centred104x96in void and finished shell returns. RecRoom and lower-entry share this interface; it is not a new door unit."
],
"model_census_by_state": {
"alcohol": {
"faces": 1382,
"object_records": 7
},
"espresso": {
"faces": 1382,
"object_records": 7
},
"espresso-open": {
"faces": 1382,
"object_records": 7
},
"alcohol-open": {
"faces": 1382,
"object_records": 7
},
"espresso-operating": {
"faces": 1382,
"object_records": 7
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Interior stairs & landings
Source/model qualification: HELD.
- 18actual upper tread surfaces;18th is main-floor landing.138/18in nominal riser;10in going;46.48in tread width.
- 270nosing-adjacent/midgoing width probes give minimum77.33333in model clearance. Source1950mmcontrol remains separate; continuous sweep/rails/landing/channel/installation and code certification not established.
Room evidence JSON
{
"id": "stairs",
"title": "Interior stairs & landings",
"level": "both",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A101",
"page": 84
},
{
"sheet": "A102",
"page": 85
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [
9
],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [],
"adjoining_wall_inventory": [],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [],
"later_changes_and_reconciliation": [
"18actual upper tread surfaces;18th is main-floor landing.138/18in nominal riser;10in going;46.48in tread width.",
"270nosing-adjacent/midgoing width probes give minimum77.33333in model clearance. Source1950mmcontrol remains separate; continuous sweep/rails/landing/channel/installation and code certification not established."
],
"model_census_by_state": {
"alcohol": {
"faces": 1008,
"object_records": 0
},
"espresso": {
"faces": 1008,
"object_records": 0
},
"espresso-open": {
"faces": 1008,
"object_records": 0
},
"alcohol-open": {
"faces": 1008,
"object_records": 0
},
"espresso-operating": {
"faces": 1008,
"object_records": 0
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}Decks, porches & exterior thresholds
Source/model qualification: HELD.
- Interior coordinate origin is not surveyed property registration. Source thresholds/roof/guards/footprints remain separate from terrain/root/permission evidence.
- Property Studio remains the GEEKOMsingle writer; current curated exterior package is the November13Synology export. No geometry/state copied back or changed.
Room evidence JSON
{
"id": "decks-porches",
"title": "Decks, porches & exterior thresholds",
"level": "exterior",
"source_aliases": [],
"primary_plan_context": [
{
"sheet": "A102",
"page": 85
},
{
"sheet": "A103",
"page": 86
},
{
"sheet": "A200",
"page": 87
},
{
"sheet": "A201",
"page": 88
},
{
"sheet": "A300",
"page": 89
},
{
"sheet": "S103",
"page": 95
},
{
"sheet": "S200",
"page": 96
},
{
"sheet": "S301",
"page": 98
}
],
"primary_page_numbering": "One-based PDF page numbers, not zero-based historical metadata indexes.",
"Meghan_concept_pages": [],
"Meghan_scope": "Appearance/programme reference only, not dimension authority. Empty list means no dedicated room page in the September22concept.",
"current_opening_units": [],
"adjoining_wall_inventory": [],
"wall_association_rule": "Within2in of current review region, which is a reading aid and not measured room clearance. Includes nearby/interface walls intentionally.",
"ceiling_controls": [],
"later_changes_and_reconciliation": [
"Interior coordinate origin is not surveyed property registration. Source thresholds/roof/guards/footprints remain separate from terrain/root/permission evidence.",
"Property Studio remains the GEEKOMsingle writer; current curated exterior package is the November13Synology export. No geometry/state copied back or changed."
],
"model_census_by_state": {
"alcohol": {
"faces": 3615,
"object_records": 6
},
"espresso": {
"faces": 3615,
"object_records": 6
},
"espresso-open": {
"faces": 3615,
"object_records": 6
},
"alcohol-open": {
"faces": 3615,
"object_records": 6
},
"espresso-operating": {
"faces": 3615,
"object_records": 6
}
},
"source_coverage": "Primary context located and room reconciliation recorded; complete independent source/quantity/operation population not yet accepted.",
"transitions": {
"T1": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T2": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T3": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T4": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T5": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T6": {
"status": "not run / upstream measurement hold",
"reason": "No new native render/design image authorized before model validation"
},
"T7": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
},
"T8": {
"status": "held",
"reason": "Property transform/field levels unmeasured"
},
"T9": {
"status": "held",
"reason": "Complete room source/quantity/operation and current release acceptance required"
}
},
"whole_space_qualified": false,
"image_generation_allowed": false,
"owner_approval": null
}