R25 source work / R26 correction candidate · November14

The four corrections are in the full model

The whole-model measurement gate remains held.

This is a working correction candidate. It preserves all 23 spaces, both floors, five bar states and the larger-chair/floated-loveseat preference. No new design photograph or native render was generated. No owner or engineering approval is recorded.

What changed in actual geometry

QuantityEarlier modelCurrent candidate
SB103 top above nominal main151.57in158.5in; rolled W10×26 profile and supporting assembly corrected
Upper/lower curtain-frame separation127.40005mm63.5mm; changed frame profiles, real wall apertures and head infill rebuilt together
Matching owned chairsAbout63.52×53.85×78.28cmNominal63×53×76cm; seat-top43cm, front-arm-tip69cm; feet on floor
Bedroom2 finished wall clearance221.12×157.04in219.875×156in; framing and finished faces distinguished

The generic main-wall correction covers13 nominal assembly envelopes. Wall-by-wall type confirmation and the wider room/basement audit remain incomplete. The later bathroom is translated to the corrected finish origin without scaling its internal layout. Continuous floors remain beneath partitions and doorway zones. Kitchen/entry ceiling geometry follows the corrected SB104underside; connection, finish and service details remain drafts.

Explore the current full 3D

These are the current working candidates, with all five configurations sharing identical building geometry. Existing appearance preferences remain preferences. Oriel is preferred pending Nada; Option C remains an independent fallback; the Great Room Rumford is unchanged.

alcoholComplete23-room house · both floors · qualification pendingespressoComplete23-room house · both floors · qualification pendingespresso-openComplete23-room house · both floors · qualification pendingalcohol-openComplete23-room house · both floors · qualification pendingespresso-operatingComplete23-room house · both floors · qualification pending

The preferred walnut and black-steel finish references are restored on the rebuilt components. The earlier candidate lost those references; that Chrome finding and its correction remain in history. Earlier R26 candidate.

What has and has not passed

The reported correction quantities now match their adopted nominal source controls. New frame/glass/steel/post/nailer components pass exact shared-edge closure checks; opaque wall faces do not cover the glass apertures. The validator rejects deliberate flat-roof, undersized-chair and wrong-window defects. These are scoped geometry checks, not completed whole-house validation.

Thirty frozen T2/T3/T9 diagnostics retain critical controls, random draws and unknowns across both reported spaces and all five states. The Great Room ordinary population is six controls, requiring all six at the declared detection target. All transition receipts remain held because source coverage and required quantities are incomplete. Other affected spaces still need complete source-bound inventories and their own transition acceptance. No statistical whole-room or whole-property accuracy claim is made.

Every inferred placement/detail and its limits · Typed correction source issue · Complete current design-plan JSON · Actual model observations · Source measurement register

Remaining coordination questions · drafts only, nothing sent
Draft only; nothing sent. R26candidate now restores scheduled steel/rolled sections and63.5mm curtain separation. Historical retained-mesh errors below refer toR20. The corrected order, placement, construction junctions and floor datums still need answers. Corrected SB104rolled depth18.11in places its underside and proposed fully flush kitchen/entry ceiling at113.39in above nominal main; construction remains unverified.

# Draft coordination questions — R25, November 14

Draft for Chris's use. Nothing sent; no engineering or owner approval created. Original plans, later changes and the full historical models are preserved. Answers change the building geometry below; general finish preferences are not being reopened.

1. **Nada / Alyssa: confirm the roof/timber/nailer and finished-ceiling junction without lowering scheduled steel.** Further primary reading closes the nominal source stack: S-200SB104top10ft11½in +C103scheduled16⅝in =A-300SB103underside12ft4⅛in; S-200SB103top13ft2½in gives10⅜in detailing depth. The scheduled geometry is coherent. The current model's10in beam and shortened post do not reproduce it. The registered R2 finished-ceiling plane does match both A-300height stations and1:12pitch; it must not be equated with timber-top elevation. S-301detail6 specifies a full-flange SPF nailer but does not dimension its thickness. Please coordinate nailer/bearing thickness, timber exposure, ceiling lining/services and structural-versus-finished-floor build-up on one section. **Changes:** connection/finish detail and any later engineered alternative. Our source-based model correction will restore the scheduled steel; no engineering or owner approval is inferred.

2. **Alyssa / Matt / Nada: supply the corrected tagged curtain-wall drawing/order promised November 11.** The email and attached `A30-00583_dessin_.pdf` require **63.5 mm (2½ in)** between the upper/lower frames; the retained mesh measures **127.40005 mm** between its actual outer-frame edges. The sketch's upper-stack heights are **4253.5 mm** at the high left and **3588.1 mm** at the low right; retained mesh stacks measure **4318.0 / 3652.000062 mm**. Please identify interior versus exterior view, final bank positions/sill datums, rough openings, separator build-up, frame/glass sightlines, and the endpoints/meaning of the blue **589 mm** correction over the earlier **613.4 mm** central-gap annotation. Reconcile sketch rounding (3685.8 mm banks; 1752/1393 mm upper high ends) with the earlier supplier values. **Changes:** both upper/lower banks, mullions, framing/center pier and roof clearance. The ~64 mm stack error is substantive; sub-millimetre source-rounding differences are separate reconciliation items.

3. **Alyssa / Matt / Nada: confirm TW106/TW107 supply versus placement.** October 6 A-201 shows 60×24 in at 144 in sill height. November 4 order p12 item25 supplies **two 60×28⅞ in frames**, tagged TW106/TW107, with **61×29⅞ in RSO**. Item26 is a further TW10760×30 in line. November 11 says the *extra* TW107 was an estimating glitch and removed. Our reading retains the two physical side openings and removes the extra supply line; please confirm this in the revised order and a marked elevation with sill/head/rough-opening datums. The upper window next to the chimney in retained #799 is identified as TW107, but its top is partly cropped. **Changes:** outer-frame/RSO sizes, wall cutouts, sill/head and roof relationship. Earlier24in height must not silently override a later supply size.

4. **Nada / Meghan / Alyssa: coordinate the kitchen ceiling with SB104 separately from SB103.** S-200 p96 schedules **SB104 W18×55 top at 10 ft 11½ in**, excluding finishes from the reference datum. Chris requires the ceiling to meet the steel intentionally: flush, or fully below the beam; no partial hanging drop. Please provide finished ceiling elevations, relevant services/lining thickness, junction and partition fixing details for the viable treatment, referenced to the same finished/structural datums. **Changes:** kitchen/entry ceiling and beam exposure, partition attachment and perceived entry sight lines. A model match to the oldSB104 value alone does not establish this detail.

Chair measurement request resolved by later owner direction: use published dimensions for the identified early cane-backed JH501. Adopt63W x53D x76H cm,43cm seat and69cm arm height from Jacksons reference1011068; Phillips independently corroborates76H x62.7W x53D cm. These are attributed nominal model dimensions, not field measurements of the pair. No further owner measurement request is a prerequisite to model them. Scale corrections must reproduce those dimensions, retain the photographed early wrapped-back form and matching pair, and receive actual-mesh QA.

Oriel remains preferred pending Nada's engineering viability response; Option C remains a separate fallback. These questions do not alter the Great Room Rumford or authorize narrowing masonry/hearths. Existing draft Oriel/fireplace questions remain open.
Frozen sampling populations, draws and receipts
Current status JSON
{
  "status": "Full-model measurement gate held",
  "current_models": [
    {
      "id": "alcohol",
      "title": "Working correction · alcohol · validation pending",
      "file": "room_review/decisions/measured-corrections-20261114-r26-v2/model-alcohol.40d2d3a0e4fb7d5f747d.json",
      "sha256": "40d2d3a0e4fb7d5f747da627ecc2528a1c3ca410fa6bcebd4f5eb518634fb8b7",
      "viewer": "room_review/decisions/measured-corrections-20261114-r26-v2/3d-alcohol.html",
      "rooms": 23,
      "floors": [
        "main",
        "basement"
      ],
      "scope": "R26full-house correction candidate; all-space measurement gate held, no images. Preferred layout/alcohol mode retained; original models remain history."
    },
    {
      "id": "espresso",
      "title": "Working correction · espresso · validation pending",
      "file": "room_review/decisions/measured-corrections-20261114-r26-v2/model-espresso.7fc45021b8c7de01d734.json",
      "sha256": "7fc45021b8c7de01d734c2ae7985e6c81c7bf6a87472ecdb0d9fbdd87cdf353b",
      "viewer": "room_review/decisions/measured-corrections-20261114-r26-v2/3d-espresso.html",
      "rooms": 23,
      "floors": [
        "main",
        "basement"
      ],
      "scope": "R26full-house correction candidate; all-space measurement gate held, no images. Preferred layout/alcohol mode retained; original models remain history."
    },
    {
      "id": "espresso-open",
      "title": "Working correction · espresso-open · validation pending",
      "file": "room_review/decisions/measured-corrections-20261114-r26-v2/model-espresso-open.f62b1deb3d08100c7bfd.json",
      "sha256": "f62b1deb3d08100c7bfd4382bbfb5014b97bdd72c072987d9e918e4d9bd335c9",
      "viewer": "room_review/decisions/measured-corrections-20261114-r26-v2/3d-espresso-open.html",
      "rooms": 23,
      "floors": [
        "main",
        "basement"
      ],
      "scope": "R26full-house correction candidate; all-space measurement gate held, no images. Preferred layout/alcohol mode retained; original models remain history."
    },
    {
      "id": "alcohol-open",
      "title": "Working correction · alcohol-open · validation pending",
      "file": "room_review/decisions/measured-corrections-20261114-r26-v2/model-alcohol-open.b9ae53176e2259433818.json",
      "sha256": "b9ae53176e2259433818e7d5579340980f9d56c425ece325981d153e19f1ac82",
      "viewer": "room_review/decisions/measured-corrections-20261114-r26-v2/3d-alcohol-open.html",
      "rooms": 23,
      "floors": [
        "main",
        "basement"
      ],
      "scope": "R26full-house correction candidate; all-space measurement gate held, no images. Preferred layout/alcohol mode retained; original models remain history."
    },
    {
      "id": "espresso-operating",
      "title": "Working correction · espresso-operating · validation pending",
      "file": "room_review/decisions/measured-corrections-20261114-r26-v2/model-espresso-operating.15226b59f0bc88cb1296.json",
      "sha256": "15226b59f0bc88cb1296f7238a389e74fa5452acf2f58bf59fdddce04f8b8d8e",
      "viewer": "room_review/decisions/measured-corrections-20261114-r26-v2/3d-espresso-operating.html",
      "rooms": 23,
      "floors": [
        "main",
        "basement"
      ],
      "scope": "R26full-house correction candidate; all-space measurement gate held, no images. Preferred layout/alcohol mode retained; original models remain history."
    }
  ],
  "known_corrections": {
    "SB103_top_inches": 158.5,
    "SB104_top_inches": 131.5,
    "curtain_vertical_frame_gap_mm": 63.5,
    "bedroom2_finished_width_inches": 219.875,
    "bedroom2_finished_depth_inches": 156.0,
    "owned_chair_width_depth_height_cm": [
      63.000000000000114,
      53.00000000000008,
      75.99999999999997
    ]
  },
  "sampling_frames": 30,
  "sample_disposition": "All held for incomplete inventories, missing2D/RSO/plate-cut/source interpretation; no whole-space statistical claim.",
  "geometry_checks": "All five share the same shell; new closed components and unblocked glass apertures checked. Deliberate roof/chair/window defects rejected by tests.",
  "remaining": "R25complete source-space inventories/T1/T2, confirmed wall assignments including basement, window order/installation and steel/ceiling/floor junctions; R27complete objects/operating checks. R28images and R29final property/export acceptance remain unqualified.",
  "new_design_images": 0,
  "owner_approval": null
}

Original plans/models, failed candidates and sampling receipts remain history. Current design is not an amended permit or construction authorization. No property-state writer, access setting or owner decision was changed.