{
  "date": "2026-11-08",
  "tool": "built-in image_gen",
  "direct_request": "Two perspectives comparing timber edges from Alyssa email",
  "calls": [
    {
      "key": "b_eased",
      "prompt": "Create a photorealistic architectural evaluation photograph from the FIRST reference image, the checked current whole-house 3D model viewed from the kitchen towards the Great Room and lake. This is a source-model-to-photograph task, not a new room design. Preserve its exact camera, perspective, room envelopes, fireplace location and proportions, solid artwork wall, entry partition, kitchen edge, seating and dining layout, existing openings, beam count/positions and roof slopes. The SECOND reference is a masonry material sample only: preferred grey Ashlar Muskoka stone, varied elongated split-granite courses, restrained mineral colours, not coarse uniform brown bricks. Do not copy any different room composition. Produce one landscape 3:2 full-frame photograph, no text, inset, collage, border or watermark.\n\nDECISION VARIANT: EASED Douglas-fir roof-timber edges. Use very dark stained Douglas fir, visible fine timber grain, restrained gently softened corners, illustrative 1/8-inch radius. Keep the approximately 6-by-10-inch member envelopes of the source model. These are almost-square corners with a tiny rounded highlight; NO broad flat 45-degree chamfer, deep V grooves or exaggerated rustic carving. Only the wood structural timbers receive this edge study. Kitchen worktops, steel and furniture do not change profile.\n\nCURRENT DESIGN DIRECTION: warm real wood plank ceiling infill matching the exterior soffits, very dark roof timbers, exposed muted sealed rust-patina I-shaped steel beam between kitchen and living room (steel must remain steel and must not be chamfered), lower kitchen ceiling in continuous pale plaster. Black window frames at exactly the existing mullion positions. Light warm wood flooring. Grey natural ashlar masonry wraps the fireplace chase front and sides. Mantel-free Renaissance Rumford 1000B, 34-inch-wide by 37-inch-high front door aperture, keep the model's aperture proportions; add believable quiet fire and real firebox detail within it. No projecting mantel, no floating shelves on the Great Room fireplace/artwork wall, no console obstructing the kitchen entry. Retain the large artwork and solid wall, foyer-return timber screen, original nook bookcase beside the Oriel and nook-side shelves. No interior window through the shared artwork/bookcase wall. Retain built-in Oriel seat inside the bay only and the bench/wood-storage bay on the Great Room side. The current Oriel preference is a 94 5/8-inch-wide, 80-inch-high unit at a 24-inch sill, fixed 66 5/8-inch middle with two 14-inch side casements; depict it only where actually visible through the model, never invent a new opening. Nook gas fireplace remains compact/provisional and in the source position.\n\nKITCHEN: same-position dark walnut enclosed cabinetry and coffee/pantry storage, honed olive-green worktops and slab splash, black details, stainless hood over the induction position, existing double sink and tap, no brass. Do not relocate or expand the kitchen into this camera. Keep the visible kitchen foreground edge from the model. Keep the source lounge and eight-place dining arrangement, warm restrained upholstery, brown lounge chair, clear routes for conversation, fireplace and lake views. Do not add a second fireplace, additional chairs, shelves, posts or fictional rooms. Do not convert model seams into ceiling holes.\n\nPHOTOGRAPHIC TREATMENT: genuinely photographic real surfaces, fine wood grain and textiles, believable furniture construction, neutral soft daylight through the actual glazing, Muskoka evergreen and lake setting outside. Balanced natural exposure, detailed readable dark timber edges, realistic shadows, no dramatic orange wash, excessive HDR or plastic CGI. Keep every visible architectural landmark aligned to the first reference. No people. This image will be paired with the identical scene and camera differing only in timber edge profile.",
      "output_hint": "Generated images are saved to C:\\Users\\cpcar\\.codex\\generated_images\\01a149de-3c98-7ea1-818b-1d9274eb8cbd as C:\\Users\\cpcar\\.codex\\generated_images\\01a149de-3c98-7ea1-818b-1d9274eb8cbd\\exec-d0b98c5b-9d08-4c8b-95b0-5c3dc1076981.png by default.\nIf you need to use a generated image at another path, copy it and leave the original in place unless the user explicitly asks you to delete it.\nThe generated image is already displayed to the user. There is no need to render it in the final response as a Markdown image or file link."
    },
    {
      "key": "b_eased_final",
      "prompt": "Edit this architectural photograph with one narrowly scoped correction: remove the narrow brown/black wood sliver near the upper middle of the WHITE KITCHEN CEILING and close it with continuous matching pale plaster. It is an unwanted source-model join artifact, not a real opening or a desired lighting detail. Preserve all other pixels and composition as closely as possible: same camera, masonry fireplace, black windows, lake, sofas, dining, artwork, timber screen, olive counter, wood ceiling, patina steel and dark Douglas-fir beams. Retain the tiny EASED rounded timber corners (illustrative1/8in radius), do not add broad chamfers. Do not change timber count, size, location, ceiling slopes, lighting, stain, framing, field of view or any furnishings. Photorealistic finished architecture. No text, collage or border.",
      "output_hint": "Generated images are saved to C:\\Users\\cpcar\\.codex\\generated_images\\01a149de-3c98-7ea1-818b-1d9274eb8cbd as C:\\Users\\cpcar\\.codex\\generated_images\\01a149de-3c98-7ea1-818b-1d9274eb8cbd\\exec-4a60e7da-6ee5-496b-b48b-8245721fe48d.png by default.\nIf you need to use a generated image at another path, copy it and leave the original in place unless the user explicitly asks you to delete it.\nThe generated image is already displayed to the user. There is no need to render it in the final response as a Markdown image or file link."
    },
    {
      "key": "a_eased",
      "prompt": "Create a photorealistic architectural evaluation photograph from the FIRST reference image, the checked current whole-house 3D model viewed from the Great Room dining area back towards the fireplace, entry and kitchen. This is a source-model-to-photograph task, not a new room design. Preserve its exact camera, perspective, room envelopes, fireplace location and proportions, solid artwork wall, entry partition, kitchen edge, seating and dining layout, existing openings, beam count/positions and roof slopes. The SECOND reference is the approved-for-this-study opposite photographic angle, used ONLY for identical materials, light and photographic character, never for camera or layout. The THIRD reference is a masonry material sample only: preferred grey Ashlar Muskoka stone, varied elongated split-granite courses, restrained mineral colours, not coarse uniform brown bricks. Do not copy any different room composition. Produce one landscape 3:2 full-frame photograph, no text, inset, collage, border or watermark.\n\nDECISION VARIANT: EASED Douglas-fir roof-timber edges. Use very dark stained Douglas fir, visible fine timber grain, restrained gently softened corners, illustrative 1/8-inch radius. Keep the approximately 6-by-10-inch member envelopes of the source model. These are almost-square corners with a tiny rounded highlight; NO broad flat 45-degree chamfer, deep V grooves or exaggerated rustic carving. Only the wood structural timbers receive this edge study. Kitchen worktops, steel and furniture do not change profile.\n\nCURRENT DESIGN DIRECTION: warm real wood plank ceiling infill matching the exterior soffits, very dark roof timbers, exposed muted sealed rust-patina I-shaped steel beam between kitchen and living room (steel must remain steel and must not be chamfered), lower kitchen ceiling in continuous pale plaster. Black window frames at exactly the existing mullion positions. Light warm wood flooring. Grey natural ashlar masonry wraps the fireplace chase front and sides. Mantel-free Renaissance Rumford 1000B, 34-inch-wide by 37-inch-high front door aperture, keep the model's aperture proportions; add believable quiet fire and real firebox detail within it. No projecting mantel, no floating shelves on the Great Room fireplace/artwork wall, no console obstructing the kitchen entry. Retain the large artwork and solid wall, foyer-return timber screen, original nook bookcase beside the Oriel and nook-side shelves. No interior window through the shared artwork/bookcase wall. Retain built-in Oriel seat inside the bay only and the bench/wood-storage bay on the Great Room side. The current Oriel preference is a 94 5/8-inch-wide, 80-inch-high unit at a 24-inch sill, fixed 66 5/8-inch middle with two 14-inch side casements; depict it only where actually visible through the model, never invent a new opening. Nook gas fireplace remains compact/provisional and in the source position.\n\nKITCHEN: same-position dark walnut enclosed cabinetry and coffee/pantry storage, honed olive-green worktops and slab splash, black details, stainless hood over the induction position, existing double sink and tap, no brass. Do not relocate or expand the kitchen into this camera. In this reverse camera keep the olive island and double sink, dark walnut fronts, stainless hood, window counter, enclosed tall storage and entry exactly where shown. Dining table is in the right foreground; fireplace is left. Keep the lower white kitchen ceiling continuous. Keep the source lounge and eight-place dining arrangement, warm restrained upholstery, brown lounge chair, clear routes for conversation, fireplace and lake views. Do not add a second fireplace, additional chairs, shelves, posts or fictional rooms. Do not convert model seams into ceiling holes.\n\nPHOTOGRAPHIC TREATMENT: genuinely photographic real surfaces, fine wood grain and textiles, believable furniture construction, neutral soft daylight through the actual glazing, Muskoka evergreen and lake setting outside. Balanced natural exposure, detailed readable dark timber edges, realistic shadows, no dramatic orange wash, excessive HDR or plastic CGI. Keep every visible architectural landmark aligned to the first reference. No people. This image will be paired with the identical scene and camera differing only in timber edge profile.",
      "output_hint": "Generated images are saved to C:\\Users\\cpcar\\.codex\\generated_images\\01a149de-3c98-7ea1-818b-1d9274eb8cbd as C:\\Users\\cpcar\\.codex\\generated_images\\01a149de-3c98-7ea1-818b-1d9274eb8cbd\\exec-2cbd764c-c18e-4e5a-ba44-6a13ddcb57b6.png by default.\nIf you need to use a generated image at another path, copy it and leave the original in place unless the user explicitly asks you to delete it.\nThe generated image is already displayed to the user. There is no need to render it in the final response as a Markdown image or file link."
    },
    {
      "key": "a_chamfered",
      "prompt": "Use case: precise-object-edit. Edit the FIRST photograph for a controlled architectural decision comparison. Change ONLY the longitudinal corners of the dark-stained Douglas-fir ROOF TIMBERS from the very small eased rounding to a clean planar 45-degree chamfer. The chamfer flat surface is 1 inch wide diagonally, equivalent to about 0.707 inch setback on each adjacent face of the inherited 6-by-10-inch beam envelope. Show this as a modest but readable narrow continuous flat facet and crisp parallel arris lines on the underside/side corners of the exposed wood beams, catching natural light in the same dark stain. No raw pale un-stained strips, no exaggerated 2-3-inch bevels, no generic weathered log beams. The SECOND image is the exact same source-model camera with the chamfer geometry and governs profile/positions only; it is a low-quality geometry guide, not a replacement for the photograph. Preserve the FIRST photo's exact camera, framing, all architecture and furniture, warm wood ceiling boards, dark timber stain, grey ashlar fireplace with no mantel, source aperture, shelves, artwork, screen, kitchen, double sink, appliances and all lighting/colours. The exposed horizontal RUST-PATINA I-shaped STEEL beam is not timber: preserve its profile and colour exactly. Do not change any countertop edge. This is a paired comparison; every pixel outside the tiny timber edge regions should stay as close as possible to the first photograph. Keep full frame landscape 3:2, genuine photographic quality, no text, collage, inset or border.",
      "output_hint": "Generated images are saved to C:\\Users\\cpcar\\.codex\\generated_images\\01a149de-3c98-7ea1-818b-1d9274eb8cbd as C:\\Users\\cpcar\\.codex\\generated_images\\01a149de-3c98-7ea1-818b-1d9274eb8cbd\\exec-e0cb39cd-b474-428b-9f0a-83f8df746e6f.png by default.\nIf you need to use a generated image at another path, copy it and leave the original in place unless the user explicitly asks you to delete it.\nThe generated image is already displayed to the user. There is no need to render it in the final response as a Markdown image or file link."
    },
    {
      "key": "b_chamfered",
      "prompt": "Use case: precise-object-edit. Edit the FIRST photograph for a controlled architectural decision comparison. Change ONLY the longitudinal corners of the dark-stained Douglas-fir ROOF TIMBERS from the very small eased rounding to a clean planar 45-degree chamfer. The chamfer flat surface is 1 inch wide diagonally, equivalent to about 0.707 inch setback on each adjacent face of the inherited 6-by-10-inch beam envelope. Show this as a modest but readable narrow continuous flat facet and crisp parallel arris lines on the underside/side corners of the exposed wood beams, catching natural light in the same dark stain. No raw pale un-stained strips, no exaggerated 2-3-inch bevels, no generic weathered log beams. The SECOND image is the exact same source-model camera with the chamfer geometry and governs profile/positions only; it is a low-quality geometry guide, not a replacement for the photograph. Preserve the FIRST photo's exact camera, framing, all architecture and furniture, warm wood ceiling boards, dark timber stain, grey ashlar fireplace with no mantel, source aperture, artwork, screen, visible kitchen foreground, seating and all lighting/colours. The exposed horizontal RUST-PATINA I-shaped STEEL beam is not timber: preserve its profile and colour exactly. Do not change any countertop edge. This is a paired comparison; every pixel outside the tiny timber edge regions should stay as close as possible to the first photograph. Keep full frame landscape 3:2, genuine photographic quality, no text, collage, inset or border.",
      "output_hint": "Generated images are saved to C:\\Users\\cpcar\\.codex\\generated_images\\01a149de-3c98-7ea1-818b-1d9274eb8cbd as C:\\Users\\cpcar\\.codex\\generated_images\\01a149de-3c98-7ea1-818b-1d9274eb8cbd\\exec-c45c6ddb-299d-4ac8-b282-cf785e4dba49.png by default.\nIf you need to use a generated image at another path, copy it and leave the original in place unless the user explicitly asks you to delete it.\nThe generated image is already displayed to the user. There is no need to render it in the final response as a Markdown image or file link."
    }
  ],
  "total_calls": 5,
  "prior_allowance_ledgers_changed": false,
  "classification": "Appearance references; native geometry guides retained. Not a matched-image certification or owner approval."
}
