{
 "date": "2026-11-10",
 "revision": "v4 (Chris Nov 10 review: stiffener break and green band removed, cubby liner matches, decorative timbers per A-200/S103; preference black powder coat)",
 "model": "R30 plus common steel-study corrections",
 "model_sha256": "efb113b01685fded1325857a490f1d8968d9f485ee2dc76001d60c378ad0fcf4",
 "canonical_r30_sha256": "bbd4f45db85c99afc82cb073210fc2ca0b602e7964d244eedc96fddf9a81d6ac",
 "units": "inches; X west, Y north/lake, Z up; main floor Z=138",
 "classes": {
  "A": "Exposed architectural steel: the option finish is applied to every face",
  "B": "Structural steel concealed in walls, piers, floor or roof framing: not visible; any modelled faces still carry the option finish; same rule if later exposed",
  "C": "Connections in S102/S301 not modelled (shop drawings): same finish rule applies; not drawn in images",
  "D": "Metal that is not architectural steel: held constant in both options",
  "E": "Exterior architectural metal guards: option finish applied in the model; partly visible in the south elevation only",
  "T": "Timber coordination items that change what steel is exposed (not steel)"
 },
 "members": [
  {
   "mark": "SB104",
   "klass": "A",
   "section": "W18x55 (ASTM A992)",
   "source": "S102 (transom wall above; 3-2x10 header above transom); S103 framing schedule; S200 section 3; S301 detail 6",
   "length_schedule": "28'-7 7/8\" cut length",
   "model_faces": 18,
   "model_bbox": {
    "x": [
     373.36,
     717.44
    ],
    "y": [
     270.0,
     277.52
    ],
    "z": [
     251.5,
     269.5
    ]
   },
   "exposure": "Exposed full depth over the kitchen/Great Room opening I109 (common v2 correction). S102 does not label SB104 exposed; the owner direction names the large horizontal beam and the October 28 study treated it as exposed. Architect/builder confirmation needed.",
   "note": "R30 wrapped it in a coplanar plaster soffit and kitchen closure, leaving a 4.62in strip. Ends buried in walls at C104.1/C104.2. Model depth 18.0in vs nominal 18.1in."
  },
  {
   "mark": "SB103",
   "klass": "A",
   "section": "W10x26 (ASTM A992)",
   "source": "S102: 'EXPOSED STEEL BEAM - BEAM TO BE POWDER COATED'; S103; S200 ISO and section 3",
   "length_schedule": "19'-2 3/4\" cut length; top of steel 13'-2 1/2\"",
   "model_faces": 18,
   "model_bbox": {
    "x": [
     541.84,
     547.6
    ],
    "y": [
     273.76,
     502.08
    ],
    "z": [
     286.5,
     296.5
    ]
   },
   "note": "Crosses the Great Room from the transom wall (C103) to the lake pier (C100.1). Model flange 5.76in, depth 10.0in vs nominal 10.33in."
  },
  {
   "mark": "SB105",
   "klass": "A",
   "section": "W12x14 (ASTM A992)",
   "source": "S102: 'EXPOSED STEEL BEAM - BEAM TO BE POWDER COATED'; S103 schedule (cut 10'-0 1/8\", top 9'-2 1/2\")",
   "model_faces": 18,
   "model_bbox": {
    "x": [
     388.49,
     508.61
    ],
    "y": [
     110.3,
     114.27
    ],
    "z": [
     236.6,
     248.5
    ]
   },
   "exposure": "Exterior: spans the open south face of the front-entry porch. Absent from R30; added to both options in v2.",
   "note": "X388.49-508.61 (120.12in = schedule cut length); top Z248.5 = 110.5in above main floor. North-south placement aligned to the R30 porch wall faces (inferred; S102 trace about 3.6in further south). Two 8x8 decorative timbers (S103, A-200) rest on top; the v3 inferred infill was removed."
  },
  {
   "mark": "Stair guard spindles",
   "klass": "A",
   "section": "R30 placeholder vertical spindles (metal assumed)",
   "source": "R30 added_details interior-stair-rails; stair system still unselected (stairs_study.html)",
   "model_faces": 816,
   "model_bbox": {
    "x": [
     260.07,
     307.05
    ],
    "y": [
     240.134,
     405.706
    ],
    "z": [
     9.556,
     178.237
    ]
   },
   "note": "Exposed interior metal guard members in R30; finish follows the option. The final stair steel (C-channel/slim posts in the separate stair study) inherits the same rule."
  },
  {
   "mark": "Firewood cubby steel liner",
   "klass": "A",
   "section": "Built-in steel liner (R24 wood-storage proposal)",
   "source": "Chris Nov 10, 2026: the firewood storage cubby should match the beams",
   "model_faces": 5,
   "model_bbox": {
    "x": [
     391.5,
     409.5
    ],
    "y": [
     279.8,
     301.8
    ],
    "z": [
     140,
     153.5
    ]
   },
   "note": "Moved from held-constant fixture metal to the steel finish set at owner direction."
  },
  {
   "mark": "Exterior deck/terrace guards",
   "klass": "E",
   "section": "Mesh/grid guards with posts and rails (assumed steel)",
   "source": "R30 added_details (Bedroom1 deck mesh owner-selected Oct 1; Muskoka terrace grid study)",
   "model_faces": 2340,
   "note": "Exposed exterior architectural metal; the option finish is applied in both option models for consistency and is visible on the left deck guard in the south elevation view. Exterior guard finish choice is still open."
  },
  {
   "mark": "C103",
   "klass": "B",
   "section": "HSS 5x5x3/16 (ASTM A500 Gr B)",
   "source": "S102: 'COLUMN C103 TO BEAR ON SB104. WELD TO BEAM WITH 1/4in FILLET WELDS. PROVIDE WEB STIFFENERS BELOW.'; S103 column schedule",
   "length_schedule": "1'-4 5/8\" cut length (includes plates)",
   "model_faces": 6,
   "model_bbox": {
    "x": [
     542.22,
     547.22
    ],
    "y": [
     271.26,
     276.26
    ],
    "z": [
     269.5,
     286.5
    ]
   },
   "note": "Inside the framed transom wall above SB104 (skin Y278.48 covers it); concealed in both options, faces still carry the option finish. 17.0in model gap vs 16.625in schedule length: 0.375in unresolved. v1 wrongly listed it as exposed."
  },
  {
   "mark": "C100",
   "klass": "B",
   "section": "HSS 5x5x3/16, cut 26'-10 1/2\"",
   "source": "S102/S103/S101.1/S200 schedules",
   "note": "Lake wall column under SB100; enclosed in wall framing. Not visible; if exposed later the same rule applies."
  },
  {
   "mark": "C100.1",
   "klass": "B",
   "section": "HSS 5x5x3/16, cut 25'-8\"",
   "source": "S102/S103/S101.1/S200 schedules",
   "note": "Under the SB103 lake end inside the 23.52in pier between CW-west and CW-east; enclosed. Not visible; if exposed later the same rule applies."
  },
  {
   "mark": "C101",
   "klass": "B",
   "section": "HSS 5x5x3/16, cut 24'-6\"",
   "source": "S102/S103/S101.1/S200 schedules",
   "note": "Lake wall column under SB101; enclosed in wall framing. Not visible; if exposed later the same rule applies."
  },
  {
   "mark": "C104.1",
   "klass": "B",
   "section": "HSS 5x5x3/16, cut 22'-10 7/8\"",
   "source": "S102/S103/S101.1/S200 schedules",
   "note": "Supports the SB104 east end; inside the wall. Not visible; if exposed later the same rule applies."
  },
  {
   "mark": "C104.2",
   "klass": "B",
   "section": "HSS 5x5x3/16, cut 12'-1 7/8\"",
   "source": "S102/S103/S101.1/S200 schedules",
   "note": "Supports the SB104 west end; inside the wall. Not visible; if exposed later the same rule applies."
  },
  {
   "mark": "SB100",
   "klass": "B",
   "section": "W10x17, top varies",
   "source": "S102/S103/S101.1/S200 schedules",
   "note": "Lake roof-edge beam above CW-west upper glazing; in head/roof framing. Not visible; if exposed later the same rule applies."
  },
  {
   "mark": "SB101",
   "klass": "B",
   "section": "W10x17, top varies",
   "source": "S102/S103/S101.1/S200 schedules",
   "note": "Lake roof-edge beam above CW-east upper glazing; in head/roof framing. Not visible; if exposed later the same rule applies."
  },
  {
   "mark": "SB001",
   "klass": "B",
   "section": "W10x17",
   "source": "S102/S103/S101.1/S200 schedules",
   "note": "Main-floor-level beam below the lake glazing; inside the floor assembly. Not visible; if exposed later the same rule applies."
  },
  {
   "mark": "SB002",
   "klass": "B",
   "section": "W10x17",
   "source": "S102/S103/S101.1/S200 schedules",
   "note": "Main-floor-level beam below the lake glazing; inside the floor assembly. Not visible; if exposed later the same rule applies."
  },
  {
   "mark": "C103 fillet welds",
   "klass": "C",
   "note": "S102: 1/4in fillet welds C103 to SB104; inside the transom wall.",
   "source": "S102 / S301 North45 steel details"
  },
  {
   "mark": "SB104 web stiffeners under C103",
   "klass": "C",
   "note": "S102: 'PROVIDE WEB STIFFENERS BELOW' and S301 detail 3 call for 3/8in stiffeners each side of the SB104 web under C103. Removed from the study images at Chris's direction (Nov 10). If required they would show in the exposed web recess: builder/engineer to confirm whether they can be avoided, concealed or detailed flush.",
   "source": "S102 / S301 North45 steel details"
  },
  {
   "mark": "SB103 shear tabs at C103 and C100.1",
   "klass": "C",
   "note": "S102: 'CONNECT SB103 TO COL USING SHEAR TAB'; S301 detail 5 (7/8in plate, 3/4in A325 bolts, min 3 bolts for beams 12in or deeper). At the wall faces; plate edges may be visible. Not modelled.",
   "source": "S102 / S301 North45 steel details"
  },
  {
   "mark": "SB104 end bearings at C104.1/C104.2",
   "klass": "C",
   "note": "S102: shear tab (3 bolts min) or bear on top of column and weld; S301 detail 4. Inside the walls.",
   "source": "S102 / S301 North45 steel details"
  },
  {
   "mark": "SB100/SB101 to columns",
   "klass": "C",
   "note": "S102: 'SB101 AND SB100 TO BE FULLY WELDED TO TOP OF COLUMNS'; concealed.",
   "source": "S102 / S301 North45 steel details"
  },
  {
   "mark": "SB105 end bearings",
   "klass": "C",
   "note": "On built-up 3-2x6 posts in the porch side walls (S102); inside the walls.",
   "source": "S102 / S301 North45 steel details"
  },
  {
   "mark": "Window frames tagged black-steel",
   "klass": "D",
   "note": "Ordered window/curtain-wall frames use a black frame material name; window products, not architectural steel. Constant."
  },
  {
   "mark": "Furniture metal",
   "klass": "D",
   "note": "Sofa/loveseat/swivel bases, coffee and dining table legs/rails: furniture hardware, constant."
  },
  {
   "mark": "Ceiling luminaires",
   "klass": "D",
   "note": "Black housings/bezels: lighting, constant."
  },
  {
   "mark": "Firewood cubby steel liner",
   "klass": "D",
   "note": "Built-in metal-lined wood storage (R24 proposal): fixture lining, constant; owner question whether it should follow the steel finish."
  },
  {
   "mark": "Rumford fireplace door/frame",
   "klass": "D",
   "note": "Appliance finish, constant."
  },
  {
   "mark": "Chimney cap / vent posts",
   "klass": "D",
   "note": "Exterior sheet metal, constant."
  },
  {
   "mark": "Kitchen appliances, bathroom fittings",
   "klass": "D",
   "note": "Product finishes, constant."
  },
  {
   "mark": "Porch decorative timbers (2)",
   "klass": "T",
   "section": "8x8 Douglas fir, dressed 7.5x7.5in (study)",
   "source": "S103 'DECORATIVE TIMBER (8X8 SHOWN)'; A-200 rear (south) elevation shows two timber ends above SB105",
   "note": "Rest on SB105 and run back to the entry wall under the porch soffit; spacing scaled from A-200 (inferred, about +/-2in). Replaces the v3 inferred infill, which A-200 contradicts."
  },
  {
   "mark": "Beam nailers/packouts",
   "klass": "T",
   "source": "S301 detail 6",
   "note": "SPF nailer on top flange (max 1/4in overhang), lumber/plywood packout: timber, not steel; can change what part of a beam is exposed. Coordinate with the architect/builder."
  }
 ]
}
