{
  "results": [
    {
      "mode": "alcohol",
      "model_sha256": "027b37142079ffdc363cba8cbc0ddc4c63005ed2eb46f80030a8f76d2ee8f373",
      "rows": [
        {
          "id": "mechanical-room.occupied-finished-depth",
          "room": "mechanical-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 111.375,
          "observed_inches": 111.375,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 113.375,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              38.4,
              40.4
            ],
            "second": [
              151.775,
              158.275
            ]
          },
          "actual_face_names": {
            "38.4": [
              "mech-south-B1-lining"
            ],
            "40.4": [
              "mech-south-B1-lining"
            ],
            "151.775": [
              "mech-bed4-0-0-side-0"
            ],
            "158.275": [
              "mech-bed4-0-0-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom4.occupied-finished-depth",
          "room": "bedroom4",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 142.125,
          "observed_inches": 142.12499999999997,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 142.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              151.775,
              158.275
            ],
            "second": [
              300.4,
              304.9
            ]
          },
          "actual_face_names": {
            "151.775": [
              "mech-bed4-0-0-side-0"
            ],
            "158.275": [
              "mech-bed4-0-0-side-2"
            ],
            "300.4": [
              "bed4-ensuite-0-0-side-0"
            ],
            "304.9": [
              "bed4-ensuite-0-0-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "ensuite3.occupied-finished-depth",
          "room": "ensuite3",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 66,
          "observed_inches": 66.0,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 66,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              300.4,
              304.9
            ],
            "second": [
              370.9,
              377.4
            ]
          },
          "actual_face_names": {
            "300.4": [
              "bed4-ensuite-0-0-side-0"
            ],
            "304.9": [
              "bed4-ensuite-0-0-side-2"
            ],
            "370.9": [
              "furnished-r15--I006-source-door-26-bedroom-wall-header-side-0"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28-bedroom-wall-header-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom3.occupied-finished-depth",
          "room": "bedroom3",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 123.25,
          "observed_inches": 123.25,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 123.25,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              370.9,
              377.4
            ],
            "second": [
              500.65,
              508.525
            ]
          },
          "actual_face_names": {
            "370.9": [
              "furnished-r15--I006-source-door-26-bedroom-wall-header-side-0"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28-bedroom-wall-header-side-2"
            ],
            "500.65": [
              "bedroom3-north-1-96-side-0::order-cut-W003"
            ],
            "508.525": [
              "bedroom3-north-1-96-side-2::order-cut-W003"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom3.occupied-finished-width",
          "room": "bedroom3",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 209.25,
          "observed_inches": 209.25,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 213.25,
            "separate_inside_lining_subtraction_inches": 4,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              38.48,
              42.48
            ],
            "second": [
              251.73,
              258.23
            ]
          },
          "actual_face_names": {
            "38.48": [
              "bedroom3-east-B2-lining"
            ],
            "42.48": [
              "bedroom3-east-B2-lining"
            ],
            "258.23": [
              "wing-hall-7-96-side-1"
            ],
            "251.73": [
              "wing-hall-7-96-side-3"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 450,
            "height_inches": 100
          }
        },
        {
          "id": "media-room.occupied-finished-width",
          "room": "media-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 189.125,
          "observed_inches": 189.125,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 189.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              511.98,
              518.48
            ],
            "second": [
              707.605,
              709.605
            ]
          },
          "actual_face_names": {
            "518.48": [
              "laundry-media-0-0-side-1"
            ],
            "511.98": [
              "laundry-media-0-0-side-3"
            ],
            "707.605": [
              "media-B1-lining"
            ],
            "709.605": [
              "media-B1-lining"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 200,
            "height_inches": 100
          }
        },
        {
          "id": "media-room.occupied-finished-depth",
          "room": "media-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 120.625,
          "observed_inches": 120.62499999999997,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 122.625,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              149.4,
              151.4
            ],
            "second": [
              272.025,
              278.525
            ]
          },
          "actual_face_names": {
            "149.4": [
              "media-south-B1-lining"
            ],
            "151.4": [
              "media-south-B1-lining"
            ],
            "272.025": [
              "media-rec-1-84-side-0"
            ],
            "278.525": [
              "media-rec-1-84-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 600,
            "height_inches": 100
          }
        },
        {
          "id": "rec-room.occupied-finished-width",
          "room": "rec-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 333.375,
          "observed_inches": 333.375,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 335.375,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              367.73,
              374.23
            ],
            "second": [
              707.605,
              709.605
            ]
          },
          "actual_face_names": {
            "374.23": [
              "rec-hall-2-0-side-1"
            ],
            "367.73": [
              "rec-hall-2-0-side-3"
            ],
            "707.605": [
              "rec-B1-lining"
            ],
            "709.605": [
              "rec-B1-lining"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 450,
            "height_inches": 100
          }
        },
        {
          "id": "rec-room.occupied-finished-depth",
          "room": "rec-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 222.125,
          "observed_inches": 222.125,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 222.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              272.025,
              278.525
            ],
            "second": [
              500.65,
              508.525
            ]
          },
          "actual_face_names": {
            "272.025": [
              "media-rec-1-84-side-0"
            ],
            "278.525": [
              "media-rec-1-84-side-2"
            ],
            "500.65": [
              "rec-north-3-96-side-0::order-cut-W005"
            ],
            "508.525": [
              "rec-north-3-96-side-2::order-cut-W005"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 600,
            "height_inches": 100
          }
        },
        {
          "id": "boot-room.occupied-finished-width",
          "room": "boot-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 61,
          "observed_inches": 61.0,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 85,
            "printed_substrate_or_finish_span_inches": 61,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              319.51,
              326.01
            ],
            "second": [
              387.01,
              396.135
            ]
          },
          "actual_face_names": {
            "326.01": [
              "powder-boot-0-0-side-1"
            ],
            "319.51": [
              "powder-boot-0-0-side-3"
            ],
            "396.135": [
              "entry-porch-east-0-0-side-1"
            ],
            "387.01": [
              "entry-porch-east-0-0-side-3"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 150,
            "height_inches": 240
          }
        },
        {
          "id": "bedroom1.occupied-finished-depth",
          "room": "bedroom1",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 161.875,
          "observed_inches": 161.89999999999998,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 85,
            "printed_substrate_or_finish_span_inches": 161.875,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              332.47,
              338.97
            ],
            "second": [
              500.87,
              508.745
            ]
          },
          "actual_face_names": {
            "332.47": [
              "bed1-south-partition-0-0-side-0"
            ],
            "338.97": [
              "bed1-south-partition-0-0-side-2"
            ],
            "500.87": [
              "bed-north-2-96-side-0::order-cut-E100::order-cut-TW100"
            ],
            "508.745": [
              "bed-north-2-96-side-2::order-cut-E100::order-cut-TW100"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 240
          }
        }
      ]
    },
    {
      "mode": "espresso",
      "model_sha256": "dc6653684f05404ad1113e1f42a7a59a5fb46275aa476a141c77147cce86f533",
      "rows": [
        {
          "id": "mechanical-room.occupied-finished-depth",
          "room": "mechanical-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 111.375,
          "observed_inches": 111.375,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 113.375,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              38.4,
              40.4
            ],
            "second": [
              151.775,
              158.275
            ]
          },
          "actual_face_names": {
            "38.4": [
              "mech-south-B1-lining"
            ],
            "40.4": [
              "mech-south-B1-lining"
            ],
            "151.775": [
              "mech-bed4-0-0-side-0"
            ],
            "158.275": [
              "mech-bed4-0-0-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom4.occupied-finished-depth",
          "room": "bedroom4",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 142.125,
          "observed_inches": 142.12499999999997,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 142.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              151.775,
              158.275
            ],
            "second": [
              300.4,
              304.9
            ]
          },
          "actual_face_names": {
            "151.775": [
              "mech-bed4-0-0-side-0"
            ],
            "158.275": [
              "mech-bed4-0-0-side-2"
            ],
            "300.4": [
              "bed4-ensuite-0-0-side-0"
            ],
            "304.9": [
              "bed4-ensuite-0-0-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "ensuite3.occupied-finished-depth",
          "room": "ensuite3",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 66,
          "observed_inches": 66.0,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 66,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              300.4,
              304.9
            ],
            "second": [
              370.9,
              377.4
            ]
          },
          "actual_face_names": {
            "300.4": [
              "bed4-ensuite-0-0-side-0"
            ],
            "304.9": [
              "bed4-ensuite-0-0-side-2"
            ],
            "370.9": [
              "furnished-r15--I006-source-door-26-bedroom-wall-header-side-0"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28-bedroom-wall-header-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom3.occupied-finished-depth",
          "room": "bedroom3",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 123.25,
          "observed_inches": 123.25,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 123.25,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              370.9,
              377.4
            ],
            "second": [
              500.65,
              508.525
            ]
          },
          "actual_face_names": {
            "370.9": [
              "furnished-r15--I006-source-door-26-bedroom-wall-header-side-0"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28-bedroom-wall-header-side-2"
            ],
            "500.65": [
              "bedroom3-north-1-96-side-0::order-cut-W003"
            ],
            "508.525": [
              "bedroom3-north-1-96-side-2::order-cut-W003"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom3.occupied-finished-width",
          "room": "bedroom3",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 209.25,
          "observed_inches": 209.25,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 213.25,
            "separate_inside_lining_subtraction_inches": 4,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              38.48,
              42.48
            ],
            "second": [
              251.73,
              258.23
            ]
          },
          "actual_face_names": {
            "38.48": [
              "bedroom3-east-B2-lining"
            ],
            "42.48": [
              "bedroom3-east-B2-lining"
            ],
            "258.23": [
              "wing-hall-7-96-side-1"
            ],
            "251.73": [
              "wing-hall-7-96-side-3"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 450,
            "height_inches": 100
          }
        },
        {
          "id": "media-room.occupied-finished-width",
          "room": "media-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 189.125,
          "observed_inches": 189.125,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 189.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              511.98,
              518.48
            ],
            "second": [
              707.605,
              709.605
            ]
          },
          "actual_face_names": {
            "518.48": [
              "laundry-media-0-0-side-1"
            ],
            "511.98": [
              "laundry-media-0-0-side-3"
            ],
            "707.605": [
              "media-B1-lining"
            ],
            "709.605": [
              "media-B1-lining"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 200,
            "height_inches": 100
          }
        },
        {
          "id": "media-room.occupied-finished-depth",
          "room": "media-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 120.625,
          "observed_inches": 120.62499999999997,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 122.625,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              149.4,
              151.4
            ],
            "second": [
              272.025,
              278.525
            ]
          },
          "actual_face_names": {
            "149.4": [
              "media-south-B1-lining"
            ],
            "151.4": [
              "media-south-B1-lining"
            ],
            "272.025": [
              "media-rec-1-84-side-0"
            ],
            "278.525": [
              "media-rec-1-84-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 600,
            "height_inches": 100
          }
        },
        {
          "id": "rec-room.occupied-finished-width",
          "room": "rec-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 333.375,
          "observed_inches": 333.375,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 335.375,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              367.73,
              374.23
            ],
            "second": [
              707.605,
              709.605
            ]
          },
          "actual_face_names": {
            "374.23": [
              "rec-hall-2-0-side-1"
            ],
            "367.73": [
              "rec-hall-2-0-side-3"
            ],
            "707.605": [
              "rec-B1-lining"
            ],
            "709.605": [
              "rec-B1-lining"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 450,
            "height_inches": 100
          }
        },
        {
          "id": "rec-room.occupied-finished-depth",
          "room": "rec-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 222.125,
          "observed_inches": 222.125,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 222.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              272.025,
              278.525
            ],
            "second": [
              500.65,
              508.525
            ]
          },
          "actual_face_names": {
            "272.025": [
              "media-rec-1-84-side-0"
            ],
            "278.525": [
              "media-rec-1-84-side-2"
            ],
            "500.65": [
              "rec-north-3-96-side-0::order-cut-W005"
            ],
            "508.525": [
              "rec-north-3-96-side-2::order-cut-W005"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 600,
            "height_inches": 100
          }
        },
        {
          "id": "boot-room.occupied-finished-width",
          "room": "boot-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 61,
          "observed_inches": 61.0,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 85,
            "printed_substrate_or_finish_span_inches": 61,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              319.51,
              326.01
            ],
            "second": [
              387.01,
              396.135
            ]
          },
          "actual_face_names": {
            "326.01": [
              "powder-boot-0-0-side-1"
            ],
            "319.51": [
              "powder-boot-0-0-side-3"
            ],
            "396.135": [
              "entry-porch-east-0-0-side-1"
            ],
            "387.01": [
              "entry-porch-east-0-0-side-3"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 150,
            "height_inches": 240
          }
        },
        {
          "id": "bedroom1.occupied-finished-depth",
          "room": "bedroom1",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 161.875,
          "observed_inches": 161.89999999999998,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 85,
            "printed_substrate_or_finish_span_inches": 161.875,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              332.47,
              338.97
            ],
            "second": [
              500.87,
              508.745
            ]
          },
          "actual_face_names": {
            "332.47": [
              "bed1-south-partition-0-0-side-0"
            ],
            "338.97": [
              "bed1-south-partition-0-0-side-2"
            ],
            "500.87": [
              "bed-north-2-96-side-0::order-cut-E100::order-cut-TW100"
            ],
            "508.745": [
              "bed-north-2-96-side-2::order-cut-E100::order-cut-TW100"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 240
          }
        }
      ]
    },
    {
      "mode": "espresso-open",
      "model_sha256": "1f5b9922e9211298f11e10e98cbef5798ca48292a143497ea00abf746c03ed20",
      "rows": [
        {
          "id": "mechanical-room.occupied-finished-depth",
          "room": "mechanical-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 111.375,
          "observed_inches": 111.375,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 113.375,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              38.4,
              40.4
            ],
            "second": [
              151.775,
              158.275
            ]
          },
          "actual_face_names": {
            "38.4": [
              "mech-south-B1-lining"
            ],
            "40.4": [
              "mech-south-B1-lining"
            ],
            "151.775": [
              "mech-bed4-0-0-side-0"
            ],
            "158.275": [
              "mech-bed4-0-0-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom4.occupied-finished-depth",
          "room": "bedroom4",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 142.125,
          "observed_inches": 142.12499999999997,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 142.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              151.775,
              158.275
            ],
            "second": [
              300.4,
              304.9
            ]
          },
          "actual_face_names": {
            "151.775": [
              "mech-bed4-0-0-side-0"
            ],
            "158.275": [
              "mech-bed4-0-0-side-2"
            ],
            "300.4": [
              "bed4-ensuite-0-0-side-0"
            ],
            "304.9": [
              "bed4-ensuite-0-0-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "ensuite3.occupied-finished-depth",
          "room": "ensuite3",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 66,
          "observed_inches": 66.0,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 66,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              300.4,
              304.9
            ],
            "second": [
              370.9,
              377.4
            ]
          },
          "actual_face_names": {
            "300.4": [
              "bed4-ensuite-0-0-side-0"
            ],
            "304.9": [
              "bed4-ensuite-0-0-side-2"
            ],
            "370.9": [
              "furnished-r15--I006-source-door-26-bedroom-wall-header-side-0"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28-bedroom-wall-header-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom3.occupied-finished-depth",
          "room": "bedroom3",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 123.25,
          "observed_inches": 123.25,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 123.25,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              370.9,
              377.4
            ],
            "second": [
              500.65,
              508.525
            ]
          },
          "actual_face_names": {
            "370.9": [
              "furnished-r15--I006-source-door-26-bedroom-wall-header-side-0"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28-bedroom-wall-header-side-2"
            ],
            "500.65": [
              "bedroom3-north-1-96-side-0::order-cut-W003"
            ],
            "508.525": [
              "bedroom3-north-1-96-side-2::order-cut-W003"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom3.occupied-finished-width",
          "room": "bedroom3",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 209.25,
          "observed_inches": 209.25,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 213.25,
            "separate_inside_lining_subtraction_inches": 4,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              38.48,
              42.48
            ],
            "second": [
              251.73,
              258.23
            ]
          },
          "actual_face_names": {
            "38.48": [
              "bedroom3-east-B2-lining"
            ],
            "42.48": [
              "bedroom3-east-B2-lining"
            ],
            "258.23": [
              "wing-hall-7-96-side-1"
            ],
            "251.73": [
              "wing-hall-7-96-side-3"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 450,
            "height_inches": 100
          }
        },
        {
          "id": "media-room.occupied-finished-width",
          "room": "media-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 189.125,
          "observed_inches": 189.125,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 189.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              511.98,
              518.48
            ],
            "second": [
              707.605,
              709.605
            ]
          },
          "actual_face_names": {
            "518.48": [
              "laundry-media-0-0-side-1"
            ],
            "511.98": [
              "laundry-media-0-0-side-3"
            ],
            "707.605": [
              "media-B1-lining"
            ],
            "709.605": [
              "media-B1-lining"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 200,
            "height_inches": 100
          }
        },
        {
          "id": "media-room.occupied-finished-depth",
          "room": "media-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 120.625,
          "observed_inches": 120.62499999999997,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 122.625,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              149.4,
              151.4
            ],
            "second": [
              272.025,
              278.525
            ]
          },
          "actual_face_names": {
            "149.4": [
              "media-south-B1-lining"
            ],
            "151.4": [
              "media-south-B1-lining"
            ],
            "272.025": [
              "media-rec-1-84-side-0"
            ],
            "278.525": [
              "media-rec-1-84-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 600,
            "height_inches": 100
          }
        },
        {
          "id": "rec-room.occupied-finished-width",
          "room": "rec-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 333.375,
          "observed_inches": 333.375,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 335.375,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              367.73,
              374.23
            ],
            "second": [
              707.605,
              709.605
            ]
          },
          "actual_face_names": {
            "374.23": [
              "rec-hall-2-0-side-1"
            ],
            "367.73": [
              "rec-hall-2-0-side-3"
            ],
            "707.605": [
              "rec-B1-lining"
            ],
            "709.605": [
              "rec-B1-lining"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 450,
            "height_inches": 100
          }
        },
        {
          "id": "rec-room.occupied-finished-depth",
          "room": "rec-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 222.125,
          "observed_inches": 222.125,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 222.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              272.025,
              278.525
            ],
            "second": [
              500.65,
              508.525
            ]
          },
          "actual_face_names": {
            "272.025": [
              "media-rec-1-84-side-0"
            ],
            "278.525": [
              "media-rec-1-84-side-2"
            ],
            "500.65": [
              "rec-north-3-96-side-0::order-cut-W005"
            ],
            "508.525": [
              "rec-north-3-96-side-2::order-cut-W005"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 600,
            "height_inches": 100
          }
        },
        {
          "id": "boot-room.occupied-finished-width",
          "room": "boot-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 61,
          "observed_inches": 61.0,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 85,
            "printed_substrate_or_finish_span_inches": 61,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              319.51,
              326.01
            ],
            "second": [
              387.01,
              396.135
            ]
          },
          "actual_face_names": {
            "326.01": [
              "powder-boot-0-0-side-1"
            ],
            "319.51": [
              "powder-boot-0-0-side-3"
            ],
            "396.135": [
              "entry-porch-east-0-0-side-1"
            ],
            "387.01": [
              "entry-porch-east-0-0-side-3"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 150,
            "height_inches": 240
          }
        },
        {
          "id": "bedroom1.occupied-finished-depth",
          "room": "bedroom1",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 161.875,
          "observed_inches": 161.89999999999998,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 85,
            "printed_substrate_or_finish_span_inches": 161.875,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              332.47,
              338.97
            ],
            "second": [
              500.87,
              508.745
            ]
          },
          "actual_face_names": {
            "332.47": [
              "bed1-south-partition-0-0-side-0"
            ],
            "338.97": [
              "bed1-south-partition-0-0-side-2"
            ],
            "500.87": [
              "bed-north-2-96-side-0::order-cut-E100::order-cut-TW100"
            ],
            "508.745": [
              "bed-north-2-96-side-2::order-cut-E100::order-cut-TW100"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 240
          }
        }
      ]
    },
    {
      "mode": "alcohol-open",
      "model_sha256": "508342117f4cba7b8262a8ef4f5179bdd69d4e961b09a0f39f3b1600b19b4a16",
      "rows": [
        {
          "id": "mechanical-room.occupied-finished-depth",
          "room": "mechanical-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 111.375,
          "observed_inches": 111.375,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 113.375,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              38.4,
              40.4
            ],
            "second": [
              151.775,
              158.275
            ]
          },
          "actual_face_names": {
            "38.4": [
              "mech-south-B1-lining"
            ],
            "40.4": [
              "mech-south-B1-lining"
            ],
            "151.775": [
              "mech-bed4-0-0-side-0"
            ],
            "158.275": [
              "mech-bed4-0-0-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom4.occupied-finished-depth",
          "room": "bedroom4",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 142.125,
          "observed_inches": 142.12499999999997,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 142.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              151.775,
              158.275
            ],
            "second": [
              300.4,
              304.9
            ]
          },
          "actual_face_names": {
            "151.775": [
              "mech-bed4-0-0-side-0"
            ],
            "158.275": [
              "mech-bed4-0-0-side-2"
            ],
            "300.4": [
              "bed4-ensuite-0-0-side-0"
            ],
            "304.9": [
              "bed4-ensuite-0-0-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "ensuite3.occupied-finished-depth",
          "room": "ensuite3",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 66,
          "observed_inches": 66.0,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 66,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              300.4,
              304.9
            ],
            "second": [
              370.9,
              377.4
            ]
          },
          "actual_face_names": {
            "300.4": [
              "bed4-ensuite-0-0-side-0"
            ],
            "304.9": [
              "bed4-ensuite-0-0-side-2"
            ],
            "370.9": [
              "furnished-r15--I006-source-door-26-bedroom-wall-header-side-0"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28-bedroom-wall-header-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom3.occupied-finished-depth",
          "room": "bedroom3",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 123.25,
          "observed_inches": 123.25,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 123.25,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              370.9,
              377.4
            ],
            "second": [
              500.65,
              508.525
            ]
          },
          "actual_face_names": {
            "370.9": [
              "furnished-r15--I006-source-door-26-bedroom-wall-header-side-0"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28-bedroom-wall-header-side-2"
            ],
            "500.65": [
              "bedroom3-north-1-96-side-0::order-cut-W003"
            ],
            "508.525": [
              "bedroom3-north-1-96-side-2::order-cut-W003"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom3.occupied-finished-width",
          "room": "bedroom3",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 209.25,
          "observed_inches": 209.25,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 213.25,
            "separate_inside_lining_subtraction_inches": 4,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              38.48,
              42.48
            ],
            "second": [
              251.73,
              258.23
            ]
          },
          "actual_face_names": {
            "38.48": [
              "bedroom3-east-B2-lining"
            ],
            "42.48": [
              "bedroom3-east-B2-lining"
            ],
            "258.23": [
              "wing-hall-7-96-side-1"
            ],
            "251.73": [
              "wing-hall-7-96-side-3"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 450,
            "height_inches": 100
          }
        },
        {
          "id": "media-room.occupied-finished-width",
          "room": "media-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 189.125,
          "observed_inches": 189.125,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 189.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              511.98,
              518.48
            ],
            "second": [
              707.605,
              709.605
            ]
          },
          "actual_face_names": {
            "518.48": [
              "laundry-media-0-0-side-1"
            ],
            "511.98": [
              "laundry-media-0-0-side-3"
            ],
            "707.605": [
              "media-B1-lining"
            ],
            "709.605": [
              "media-B1-lining"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 200,
            "height_inches": 100
          }
        },
        {
          "id": "media-room.occupied-finished-depth",
          "room": "media-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 120.625,
          "observed_inches": 120.62499999999997,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 122.625,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              149.4,
              151.4
            ],
            "second": [
              272.025,
              278.525
            ]
          },
          "actual_face_names": {
            "149.4": [
              "media-south-B1-lining"
            ],
            "151.4": [
              "media-south-B1-lining"
            ],
            "272.025": [
              "media-rec-1-84-side-0"
            ],
            "278.525": [
              "media-rec-1-84-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 600,
            "height_inches": 100
          }
        },
        {
          "id": "rec-room.occupied-finished-width",
          "room": "rec-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 333.375,
          "observed_inches": 333.375,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 335.375,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              367.73,
              374.23
            ],
            "second": [
              707.605,
              709.605
            ]
          },
          "actual_face_names": {
            "374.23": [
              "rec-hall-2-0-side-1"
            ],
            "367.73": [
              "rec-hall-2-0-side-3"
            ],
            "707.605": [
              "rec-B1-lining"
            ],
            "709.605": [
              "rec-B1-lining"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 450,
            "height_inches": 100
          }
        },
        {
          "id": "rec-room.occupied-finished-depth",
          "room": "rec-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 222.125,
          "observed_inches": 222.125,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 222.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              272.025,
              278.525
            ],
            "second": [
              500.65,
              508.525
            ]
          },
          "actual_face_names": {
            "272.025": [
              "media-rec-1-84-side-0"
            ],
            "278.525": [
              "media-rec-1-84-side-2"
            ],
            "500.65": [
              "rec-north-3-96-side-0::order-cut-W005"
            ],
            "508.525": [
              "rec-north-3-96-side-2::order-cut-W005"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 600,
            "height_inches": 100
          }
        },
        {
          "id": "boot-room.occupied-finished-width",
          "room": "boot-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 61,
          "observed_inches": 61.0,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 85,
            "printed_substrate_or_finish_span_inches": 61,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              319.51,
              326.01
            ],
            "second": [
              387.01,
              396.135
            ]
          },
          "actual_face_names": {
            "326.01": [
              "powder-boot-0-0-side-1"
            ],
            "319.51": [
              "powder-boot-0-0-side-3"
            ],
            "396.135": [
              "entry-porch-east-0-0-side-1"
            ],
            "387.01": [
              "entry-porch-east-0-0-side-3"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 150,
            "height_inches": 240
          }
        },
        {
          "id": "bedroom1.occupied-finished-depth",
          "room": "bedroom1",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 161.875,
          "observed_inches": 161.89999999999998,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 85,
            "printed_substrate_or_finish_span_inches": 161.875,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              332.47,
              338.97
            ],
            "second": [
              500.87,
              508.745
            ]
          },
          "actual_face_names": {
            "332.47": [
              "bed1-south-partition-0-0-side-0"
            ],
            "338.97": [
              "bed1-south-partition-0-0-side-2"
            ],
            "500.87": [
              "bed-north-2-96-side-0::order-cut-E100::order-cut-TW100"
            ],
            "508.745": [
              "bed-north-2-96-side-2::order-cut-E100::order-cut-TW100"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 240
          }
        }
      ]
    },
    {
      "mode": "espresso-operating",
      "model_sha256": "d920df685aad1a33557f45e62683c2b5bda9f83d1bd287d92683e86f6944a207",
      "rows": [
        {
          "id": "mechanical-room.occupied-finished-depth",
          "room": "mechanical-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 111.375,
          "observed_inches": 111.375,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 113.375,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              38.4,
              40.4
            ],
            "second": [
              151.775,
              158.275
            ]
          },
          "actual_face_names": {
            "38.4": [
              "mech-south-B1-lining"
            ],
            "40.4": [
              "mech-south-B1-lining"
            ],
            "151.775": [
              "mech-bed4-0-0-side-0"
            ],
            "158.275": [
              "mech-bed4-0-0-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom4.occupied-finished-depth",
          "room": "bedroom4",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 142.125,
          "observed_inches": 142.12499999999997,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 142.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              151.775,
              158.275
            ],
            "second": [
              300.4,
              304.9
            ]
          },
          "actual_face_names": {
            "151.775": [
              "mech-bed4-0-0-side-0"
            ],
            "158.275": [
              "mech-bed4-0-0-side-2"
            ],
            "300.4": [
              "bed4-ensuite-0-0-side-0"
            ],
            "304.9": [
              "bed4-ensuite-0-0-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "ensuite3.occupied-finished-depth",
          "room": "ensuite3",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 66,
          "observed_inches": 66.0,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 66,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              300.4,
              304.9
            ],
            "second": [
              370.9,
              377.4
            ]
          },
          "actual_face_names": {
            "300.4": [
              "bed4-ensuite-0-0-side-0"
            ],
            "304.9": [
              "bed4-ensuite-0-0-side-2"
            ],
            "370.9": [
              "furnished-r15--I006-source-door-26-bedroom-wall-header-side-0"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28-bedroom-wall-header-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom3.occupied-finished-depth",
          "room": "bedroom3",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 123.25,
          "observed_inches": 123.25,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 123.25,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              370.9,
              377.4
            ],
            "second": [
              500.65,
              508.525
            ]
          },
          "actual_face_names": {
            "370.9": [
              "furnished-r15--I006-source-door-26-bedroom-wall-header-side-0"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28-bedroom-wall-header-side-2"
            ],
            "500.65": [
              "bedroom3-north-1-96-side-0::order-cut-W003"
            ],
            "508.525": [
              "bedroom3-north-1-96-side-2::order-cut-W003"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 100
          }
        },
        {
          "id": "bedroom3.occupied-finished-width",
          "room": "bedroom3",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 209.25,
          "observed_inches": 209.25,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 213.25,
            "separate_inside_lining_subtraction_inches": 4,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              38.48,
              42.48
            ],
            "second": [
              251.73,
              258.23
            ]
          },
          "actual_face_names": {
            "38.48": [
              "bedroom3-east-B2-lining"
            ],
            "42.48": [
              "bedroom3-east-B2-lining"
            ],
            "258.23": [
              "wing-hall-7-96-side-1"
            ],
            "251.73": [
              "wing-hall-7-96-side-3"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 450,
            "height_inches": 100
          }
        },
        {
          "id": "media-room.occupied-finished-width",
          "room": "media-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 189.125,
          "observed_inches": 189.125,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 189.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              511.98,
              518.48
            ],
            "second": [
              707.605,
              709.605
            ]
          },
          "actual_face_names": {
            "518.48": [
              "laundry-media-0-0-side-1"
            ],
            "511.98": [
              "laundry-media-0-0-side-3"
            ],
            "707.605": [
              "media-B1-lining"
            ],
            "709.605": [
              "media-B1-lining"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 200,
            "height_inches": 100
          }
        },
        {
          "id": "media-room.occupied-finished-depth",
          "room": "media-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 120.625,
          "observed_inches": 120.62499999999997,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 122.625,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              149.4,
              151.4
            ],
            "second": [
              272.025,
              278.525
            ]
          },
          "actual_face_names": {
            "149.4": [
              "media-south-B1-lining"
            ],
            "151.4": [
              "media-south-B1-lining"
            ],
            "272.025": [
              "media-rec-1-84-side-0"
            ],
            "278.525": [
              "media-rec-1-84-side-2"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 600,
            "height_inches": 100
          }
        },
        {
          "id": "rec-room.occupied-finished-width",
          "room": "rec-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 333.375,
          "observed_inches": 333.375,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 335.375,
            "separate_inside_lining_subtraction_inches": 2,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              367.73,
              374.23
            ],
            "second": [
              707.605,
              709.605
            ]
          },
          "actual_face_names": {
            "374.23": [
              "rec-hall-2-0-side-1"
            ],
            "367.73": [
              "rec-hall-2-0-side-3"
            ],
            "707.605": [
              "rec-B1-lining"
            ],
            "709.605": [
              "rec-B1-lining"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 450,
            "height_inches": 100
          }
        },
        {
          "id": "rec-room.occupied-finished-depth",
          "room": "rec-room",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 222.125,
          "observed_inches": 222.125,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 84,
            "printed_substrate_or_finish_span_inches": 222.125,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              272.025,
              278.525
            ],
            "second": [
              500.65,
              508.525
            ]
          },
          "actual_face_names": {
            "272.025": [
              "media-rec-1-84-side-0"
            ],
            "278.525": [
              "media-rec-1-84-side-2"
            ],
            "500.65": [
              "rec-north-3-96-side-0::order-cut-W005"
            ],
            "508.525": [
              "rec-north-3-96-side-2::order-cut-W005"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 600,
            "height_inches": 100
          }
        },
        {
          "id": "boot-room.occupied-finished-width",
          "room": "boot-room",
          "quantity_type": "occupied-finished-width",
          "expected_inches": 61,
          "observed_inches": 61.0,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 85,
            "printed_substrate_or_finish_span_inches": 61,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              319.51,
              326.01
            ],
            "second": [
              387.01,
              396.135
            ]
          },
          "actual_face_names": {
            "326.01": [
              "powder-boot-0-0-side-1"
            ],
            "319.51": [
              "powder-boot-0-0-side-3"
            ],
            "396.135": [
              "entry-porch-east-0-0-side-1"
            ],
            "387.01": [
              "entry-porch-east-0-0-side-3"
            ]
          },
          "probe": {
            "axis": 0,
            "along_inches": 150,
            "height_inches": 240
          }
        },
        {
          "id": "bedroom1.occupied-finished-depth",
          "room": "bedroom1",
          "quantity_type": "occupied-finished-depth",
          "expected_inches": 161.875,
          "observed_inches": 161.89999999999998,
          "status": "pass",
          "tolerance_inches": 0.125,
          "tolerance_basis": "Primary eighth-inch nominal source and scaled line registration diagnostic; not a field/construction tolerance.",
          "source": {
            "file": "docs/Drive_Sync/07_PERMITS/BP-2026-0678 Building Permit (Issued 2026-08-20).pdf",
            "page": 85,
            "printed_substrate_or_finish_span_inches": 161.875,
            "separate_inside_lining_subtraction_inches": 0,
            "interpretation": "Preserve printed physical endpoints; occupied finished span is derived only where a separate source lining lies inside the dimension."
          },
          "actual_planes": {
            "first": [
              332.47,
              338.97
            ],
            "second": [
              500.87,
              508.745
            ]
          },
          "actual_face_names": {
            "332.47": [
              "bed1-south-partition-0-0-side-0"
            ],
            "338.97": [
              "bed1-south-partition-0-0-side-2"
            ],
            "500.87": [
              "bed-north-2-96-side-0::order-cut-E100::order-cut-TW100"
            ],
            "508.745": [
              "bed-north-2-96-side-2::order-cut-E100::order-cut-TW100"
            ]
          },
          "probe": {
            "axis": 1,
            "along_inches": 100,
            "height_inches": 240
          }
        }
      ]
    }
  ],
  "observer_sha256": "3edf48b48b487fefc8f3f2f2ea74c16c98314fffbac2a642d96a77113096d392",
  "supersedes_interpretation": "Original substrate spans were incorrectly called finished clearances; old failed/incomplete draws remain immutable history.",
  "whole_room_qualified": false,
  "image_generation_allowed": false,
  "owner_approval": null
}
