{
  "results": [
    {
      "mode": "alcohol",
      "model_sha256": "027b37142079ffdc363cba8cbc0ddc4c63005ed2eb46f80030a8f76d2ee8f373",
      "source_plan_sha256_matches": true,
      "canonical_arrays_match": true,
      "walls": [
        {
          "id": "main.bed-east.normal-min",
          "wall": "bed-east",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 23.974999999999984,
          "observed_inches": 23.975,
          "delta_inches": 1.7763568394002505e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-east.normal-max",
          "wall": "bed-east",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 31.849999999999984,
          "observed_inches": 31.85,
          "delta_inches": 1.7763568394002505e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-east.nominal-envelope-thickness",
          "wall": "bed-east",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.normal-min",
          "wall": "bed-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 23.975000000000005,
          "observed_inches": 23.975,
          "delta_inches": -3.552713678800501e-15,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.normal-max",
          "wall": "bed-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 31.850000000000005,
          "observed_inches": 31.85,
          "delta_inches": -3.552713678800501e-15,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.nominal-envelope-thickness",
          "wall": "bed-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.normal-min",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 251.725,
          "observed_inches": 251.725,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.normal-max",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 259.6000000000001,
          "observed_inches": 259.6,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.nominal-envelope-thickness",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875000000000085,
          "observed_inches": 7.875000000000028,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.normal-min",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 187.85,
          "observed_inches": 187.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.normal-max",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 194.35,
          "observed_inches": 194.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.nominal-envelope-thickness",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.normal-min",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 332.46999999999997,
          "observed_inches": 332.35,
          "delta_inches": -0.1199999999999477,
          "status": "fail",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.normal-max",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 338.96999999999997,
          "observed_inches": 338.97,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.nominal-envelope-thickness",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.6200000000000045,
          "delta_inches": 0.12000000000000455,
          "status": "fail",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.normal-min",
          "wall": "bed-north",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 500.86999999999995,
          "observed_inches": 500.87,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.normal-max",
          "wall": "bed-north",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 508.74499999999995,
          "observed_inches": 508.745,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.nominal-envelope-thickness",
          "wall": "bed-north",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.normal-min",
          "wall": "hall-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 251.725,
          "observed_inches": 251.725,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.normal-max",
          "wall": "hall-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 258.2250000000001,
          "observed_inches": 258.225,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.nominal-envelope-thickness",
          "wall": "hall-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.500000000000085,
          "observed_inches": 6.500000000000028,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.normal-min",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 110.935,
          "observed_inches": 110.935,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.normal-max",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 118.81,
          "observed_inches": 118.81,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.nominal-envelope-thickness",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.normal-min",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 319.51,
          "observed_inches": 319.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.normal-max",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 326.01,
          "observed_inches": 326.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.nominal-envelope-thickness",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.normal-min",
          "wall": "powder-north",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 189.91,
          "observed_inches": 189.91,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.normal-max",
          "wall": "powder-north",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 194.41,
          "observed_inches": 194.41,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.nominal-envelope-thickness",
          "wall": "powder-north",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.entry-south.normal-min",
          "wall": "entry-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 162.975,
          "observed_inches": 162.975,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-south.normal-max",
          "wall": "entry-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 170.85,
          "observed_inches": 170.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-south.nominal-envelope-thickness",
          "wall": "entry-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-porch-east.normal-min",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 387.01,
          "observed_inches": 387.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-east.normal-max",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 396.135,
          "observed_inches": 396.135,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-east.nominal-envelope-thickness",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 9.125,
          "observed_inches": 9.125,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-west.normal-min",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 502.2050000000001,
          "observed_inches": 502.205,
          "delta_inches": -1.1368683772161603e-13,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.entry-porch-west.normal-max",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 510.0800000000001,
          "observed_inches": 510.08,
          "delta_inches": -1.1368683772161603e-13,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.entry-porch-west.nominal-envelope-thickness",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.nook-south.normal-min",
          "wall": "nook-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 456.32,
          "observed_inches": 456.32,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-south.normal-max",
          "wall": "nook-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 462.32,
          "observed_inches": 462.355,
          "delta_inches": 0.03500000000002501,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-south.nominal-envelope-thickness",
          "wall": "nook-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.0,
          "observed_inches": 6.035000000000025,
          "delta_inches": 0.03500000000002501,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-west.normal-min",
          "wall": "nook-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 368.40000000000003,
          "observed_inches": 368.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "main.nook-west.normal-max",
          "wall": "nook-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 374.40000000000003,
          "observed_inches": 374.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "main.nook-west.nominal-envelope-thickness",
          "wall": "nook-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.0,
          "observed_inches": 6.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "basement.foundation-east.normal-min",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 25.230000000000018,
          "observed_inches": 25.19487,
          "delta_inches": -0.03513000000001654,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-east.normal-max",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-east.nominal-envelope-thickness",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.285129999999995,
          "delta_inches": 0.03512999999999522,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.normal-min",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 25.149999999999995,
          "observed_inches": 25.11508,
          "delta_inches": -0.034919999999996065,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.normal-max",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 38.4,
          "observed_inches": 38.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.nominal-envelope-thickness",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.250000000000004,
          "observed_inches": 13.28492,
          "delta_inches": 0.034919999999996065,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-mech-west.normal-min",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 243.35500000000002,
          "observed_inches": 243.355,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-mech-west.normal-max",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 258.355,
          "observed_inches": 258.39453,
          "delta_inches": 0.039529999999956544,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-mech-west.nominal-envelope-thickness",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 15.0,
          "observed_inches": 15.039529999999985,
          "delta_inches": 0.039529999999984966,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-bath-south.normal-min",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 112.17499999999997,
          "observed_inches": 112.14008,
          "delta_inches": -0.034919999999971196,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-bath-south.normal-max",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 125.42499999999997,
          "observed_inches": 125.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-bath-south.nominal-envelope-thickness",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.28492,
          "delta_inches": 0.03491999999999962,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-entry-east.normal-min",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 376.355,
          "observed_inches": 376.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-east.normal-max",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 393.605,
          "observed_inches": 393.65046,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-east.nominal-envelope-thickness",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 17.25,
          "observed_inches": 17.29545999999999,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-north.normal-min",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 164.15000000000003,
          "observed_inches": 164.15,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-north.normal-max",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 181.4,
          "observed_inches": 181.44546,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-north.nominal-envelope-thickness",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 17.24999999999997,
          "observed_inches": 17.29545999999999,
          "delta_inches": 0.04546000000001982,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-west.normal-min",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 503.23,
          "observed_inches": 503.18956,
          "delta_inches": -0.04044000000004644,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-west.normal-max",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 518.48,
          "observed_inches": 518.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-west.nominal-envelope-thickness",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 15.25,
          "observed_inches": 15.290440000000046,
          "delta_inches": 0.04044000000004644,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-media-south.normal-min",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 136.15000000000003,
          "observed_inches": 136.11487,
          "delta_inches": -0.03513000000003785,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-media-south.normal-max",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 149.40000000000003,
          "observed_inches": 149.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-media-south.nominal-envelope-thickness",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.28513000000001,
          "delta_inches": 0.03513000000000943,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-west.normal-min",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.foundation-west.normal-max",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 722.855,
          "observed_inches": 722.88992,
          "delta_inches": 0.034919999999942775,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.foundation-west.nominal-envelope-thickness",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.284919999999943,
          "delta_inches": 0.034919999999942775,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.bedroom3-north.normal-min",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 500.65000000000003,
          "observed_inches": 500.65,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.bedroom3-north.normal-max",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 508.52500000000003,
          "observed_inches": 508.57493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.bedroom3-north.nominal-envelope-thickness",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924930000000018,
          "delta_inches": 0.04993000000001757,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.rec-north.normal-min",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 500.65000000000003,
          "observed_inches": 500.65,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.rec-north.normal-max",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 508.52500000000003,
          "observed_inches": 508.57493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.rec-north.nominal-envelope-thickness",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924930000000018,
          "delta_inches": 0.04993000000001757,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.walkout-north.normal-min",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 456.0,
          "observed_inches": 456.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-north.normal-max",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 463.875,
          "observed_inches": 463.92567,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-north.nominal-envelope-thickness",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.925670000000025,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-east.normal-min",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 251.73000000000002,
          "observed_inches": 251.73,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-east.normal-max",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 259.605,
          "observed_inches": 259.65493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-east.nominal-envelope-thickness",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924929999999989,
          "delta_inches": 0.04992999999998915,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.normal-min",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 366.355,
          "observed_inches": 366.30433,
          "delta_inches": -0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.normal-max",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.nominal-envelope-thickness",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.925670000000025,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.mech-bed4.normal-min",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 151.775,
          "observed_inches": 151.775,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-bed4.normal-max",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 158.275,
          "observed_inches": 158.275,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-bed4.nominal-envelope-thickness",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-hall.normal-min",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.mech-hall.normal-max",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.mech-hall.nominal-envelope-thickness",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.bath-east.normal-min",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 243.51,
          "observed_inches": 243.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.bath-east.normal-max",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 250.01,
          "observed_inches": 250.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.bath-east.nominal-envelope-thickness",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.normal-min",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 201.51,
          "observed_inches": 201.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.normal-max",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 206.01,
          "observed_inches": 206.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.nominal-envelope-thickness",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.bed4-hall.normal-min",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-hall.normal-max",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-hall.nominal-envelope-thickness",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-alcove.normal-min",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-alcove.normal-max",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-alcove.nominal-envelope-thickness",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-storage.normal-min",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 247.99,
          "observed_inches": 247.99,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-storage.normal-max",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 252.49,
          "observed_inches": 252.49,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-storage.nominal-envelope-thickness",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-ensuite.normal-min",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 300.40000000000003,
          "observed_inches": 300.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.bed4-ensuite.normal-max",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 304.90000000000003,
          "observed_inches": 304.9,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.bed4-ensuite.nominal-envelope-thickness",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.ensuite-wic.normal-min",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 161.99,
          "observed_inches": 161.99,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-wic.normal-max",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 168.49,
          "observed_inches": 168.49,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-wic.nominal-envelope-thickness",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-bedroom3.normal-min",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 370.90000000000003,
          "observed_inches": 370.9,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.ensuite-bedroom3.normal-max",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 377.40000000000003,
          "observed_inches": 377.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.ensuite-bedroom3.nominal-envelope-thickness",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.wing-hall.normal-min",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 251.73000000000002,
          "observed_inches": 251.73,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.wing-hall.normal-max",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 258.23,
          "observed_inches": 258.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.wing-hall.nominal-envelope-thickness",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.500000000000028,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.hall-laundry.normal-min",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 367.73,
          "observed_inches": 367.73,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.hall-laundry.normal-max",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.hall-laundry.nominal-envelope-thickness",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.laundry-north.normal-min",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 272.02500000000003,
          "observed_inches": 272.025,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-north.normal-max",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 278.52500000000003,
          "observed_inches": 278.525,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-north.nominal-envelope-thickness",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-media.normal-min",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 511.98,
          "observed_inches": 511.98,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.laundry-media.normal-max",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 518.48,
          "observed_inches": 518.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.laundry-media.nominal-envelope-thickness",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.media-rec.normal-min",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 272.02500000000003,
          "observed_inches": 272.025,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.media-rec.normal-max",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 278.52500000000003,
          "observed_inches": 278.525,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.media-rec.nominal-envelope-thickness",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.rec-hall.normal-min",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 367.73,
          "observed_inches": 367.73,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "basement.rec-hall.normal-max",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "basement.rec-hall.nominal-envelope-thickness",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "main.bath-hall-nov03.normal-min",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 181.35,
          "observed_inches": 181.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "main.bath-hall-nov03.normal-max",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 185.85,
          "observed_inches": 185.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "main.bath-hall-nov03.nominal-envelope-thickness",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "basement.media-B1-lining.normal-min",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 707.605,
          "observed_inches": 707.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.media-B1-lining.normal-max",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.media-B1-lining.nominal-envelope-thickness",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.rec-B1-lining.normal-min",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 707.605,
          "observed_inches": 707.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.rec-B1-lining.normal-max",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.rec-B1-lining.nominal-envelope-thickness",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.media-south-B1-lining.normal-min",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 149.40000000000003,
          "observed_inches": 149.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.media-south-B1-lining.normal-max",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 151.40000000000003,
          "observed_inches": 151.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.media-south-B1-lining.nominal-envelope-thickness",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.wing-east-B1-lining.normal-min",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.wing-east-B1-lining.normal-max",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 40.48000000000002,
          "observed_inches": 40.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.wing-east-B1-lining.nominal-envelope-thickness",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.mech-south-B1-lining.normal-min",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.4,
          "observed_inches": 38.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.mech-south-B1-lining.normal-max",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 40.4,
          "observed_inches": 40.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.mech-south-B1-lining.nominal-envelope-thickness",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.normal-min",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.normal-max",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 42.48000000000002,
          "observed_inches": 42.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.nominal-envelope-thickness",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.0,
          "observed_inches": 4.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bath-south-finish-lining.normal-min",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 125.42499999999997,
          "observed_inches": 125.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-south-finish-lining.normal-max",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 129.42499999999998,
          "observed_inches": 129.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-south-finish-lining.nominal-envelope-thickness",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.000000000000014,
          "observed_inches": 4.000000000000014,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-laundry-return.normal-min",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 376.355,
          "observed_inches": 376.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "basement.bath-laundry-return.normal-max",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 382.855,
          "observed_inches": 382.855,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "basement.bath-laundry-return.nominal-envelope-thickness",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "main.registered-west-E1.normal-min",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 716.48,
          "observed_inches": 716.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-west-E1.normal-max",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 724.355,
          "observed_inches": 724.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-west-E1.nominal-envelope-thickness",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-kitchen-south-E1.normal-min",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 134.925,
          "observed_inches": 134.925,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-kitchen-south-E1.normal-max",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 142.8,
          "observed_inches": 142.8,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-kitchen-south-E1.nominal-envelope-thickness",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-lake-E1.normal-min",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 500.87999999999994,
          "observed_inches": 500.88,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.registered-lake-E1.normal-max",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 508.75499999999994,
          "observed_inches": 508.755,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.registered-lake-E1.nominal-envelope-thickness",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.primary-WC-west.normal-min",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 138.85,
          "observed_inches": 138.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-west.normal-max",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 143.35,
          "observed_inches": 143.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-west.nominal-envelope-thickness",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.normal-min",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 260.84999999999997,
          "observed_inches": 260.85,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.normal-max",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 265.34999999999997,
          "observed_inches": 265.35,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.nominal-envelope-thickness",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        }
      ],
      "frames": [
        {
          "tag": "W100",
          "room": "bedroom2",
          "observed_inches": {
            "width": 25.0,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W101",
          "room": "bedroom2",
          "observed_inches": {
            "width": 99.00000000000001,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 99,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W102",
          "room": "bedroom2",
          "observed_inches": {
            "width": 99.00000000000001,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 99,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W103",
          "room": "primary-bathroom",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W104",
          "room": "primary-bathroom",
          "observed_inches": {
            "width": 72.00000000000003,
            "high-height": 96.0,
            "physical-depth": 5.625
          },
          "expected_programme_inches": {
            "width": 72,
            "high-height": 96,
            "physical-depth": 5.625
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W105",
          "room": "bedroom1",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W106",
          "room": "bedroom1",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W110",
          "room": "boot-room",
          "observed_inches": {
            "width": 25.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W111",
          "room": "powder-room",
          "observed_inches": {
            "width": 25.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W001",
          "room": "bedroom4",
          "observed_inches": {
            "width": 60.00000000000003,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W002",
          "room": "ensuite3",
          "observed_inches": {
            "width": 25.0,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W003",
          "room": "bedroom3",
          "observed_inches": {
            "width": 138.9375,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 138.9375,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W004",
          "room": "rec-room",
          "observed_inches": {
            "width": 145.125,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.125,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W005",
          "room": "rec-room",
          "observed_inches": {
            "width": 145.125,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.125,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W006",
          "room": "rec-room",
          "observed_inches": {
            "width": 27.0,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E002",
          "room": "lower-entry",
          "observed_inches": {
            "width": 70.625,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "expected_programme_inches": {
            "width": 70.625,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E004",
          "room": "rec-room",
          "observed_inches": {
            "width": 38.0,
            "high-height": 95.5,
            "physical-depth": 6.625
          },
          "expected_programme_inches": {
            "width": 38,
            "high-height": 95.5,
            "physical-depth": 6.625
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E100",
          "room": "bedroom1",
          "observed_inches": {
            "width": 139.1875,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "expected_programme_inches": {
            "width": 139.1875,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W112",
          "room": "kitchen",
          "observed_inches": {
            "width": 144.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 144,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW100",
          "room": "bedroom1",
          "observed_inches": {
            "width": 47.3125,
            "high-height": 24.25,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 47.3125,
            "high-height": 24.25,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW101",
          "room": "bedroom1",
          "observed_inches": {
            "width": 44.5625,
            "high-height": 27.9375,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 44.5625,
            "high-height": 27.9375,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW102",
          "room": "bedroom1",
          "observed_inches": {
            "width": 47.3125,
            "high-height": 31.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 47.3125,
            "high-height": 31.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W109",
          "room": "greatroom",
          "observed_inches": {
            "width": 27.0,
            "high-height": 72.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 72,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW106",
          "room": "greatroom",
          "observed_inches": {
            "width": 60.0,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW107",
          "room": "greatroom",
          "observed_inches": {
            "width": 60.0,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW105",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW104",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 25.125,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 25.125,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW103",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 21.375,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 21.375,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-west-lower",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 95.98425,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047247,
            "high-height": 95.98425196850394,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-west-upper",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 68.97637999999998,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047247,
            "high-height": 68.97637795275591,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-east-lower",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 95.98425,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047242,
            "high-height": 95.98425196850394,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-east-upper",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 54.84252000000001,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047242,
            "high-height": 54.84251968503935,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W007",
          "room": "rec-room",
          "observed_inches": {
            "width": 24.0,
            "high-height": 72.0,
            "physical-depth": 5.439999999999998
          },
          "expected_programme_inches": {
            "width": 24,
            "high-height": 72,
            "physical-depth": 5.44
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Primary baseline nominal opening, Nov11addition confirmed; actual updated supplier frame/profile unresolved",
          "status": "pass"
        },
        {
          "tag": "W108",
          "room": "greatroom",
          "observed_inches": {
            "width": 27.0,
            "high-height": 72.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 72,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Quoted nominal27x72casement /4.5in frame; centre from primaryA102jambs, mounting depth retained as explicit study registration",
          "status": "pass"
        },
        {
          "tag": "EST-B3-WOODS-01",
          "room": "bedroom3",
          "observed_inches": {
            "width": 25.0,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "owner-authorized estimated design position / matching proposed family size",
          "status": "pass"
        }
      ],
      "critical_openings": [
        {
          "id": "rec-room.E004.ICF-width",
          "expected_inches": 44,
          "observed_inches": 44.0,
          "actual_slice": {
            "width_inches": 44.0,
            "bounds": [
              281.8,
              50.0,
              325.8,
              50.0
            ],
            "normal_planes": [
              709.605,
              722.855,
              722.88992
            ]
          },
          "status": "pass"
        },
        {
          "id": "rec-room.E004.framed-width",
          "expected_inches": 39,
          "observed_inches": 39.0,
          "status": "pass"
        },
        {
          "id": "greatroom.E101.rough-width",
          "expected_inches": 131.75,
          "observed_inches": 131.75,
          "actual_slice": {
            "width_inches": 131.75,
            "bounds": [
              284.57,
              200.0,
              416.32,
              200.0
            ],
            "normal_planes": [
              716.48,
              724.355
            ]
          },
          "status": "pass"
        }
      ],
      "face_integrity": {
        "unique_face_ids": true,
        "face_count": 68115,
        "invalid_or_zero_faces": []
      },
      "whole_model_qualified": false,
      "image_generation_allowed": false,
      "owner_approval": null
    },
    {
      "mode": "espresso",
      "model_sha256": "dc6653684f05404ad1113e1f42a7a59a5fb46275aa476a141c77147cce86f533",
      "source_plan_sha256_matches": true,
      "canonical_arrays_match": true,
      "walls": [
        {
          "id": "main.bed-east.normal-min",
          "wall": "bed-east",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 23.974999999999984,
          "observed_inches": 23.975,
          "delta_inches": 1.7763568394002505e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-east.normal-max",
          "wall": "bed-east",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 31.849999999999984,
          "observed_inches": 31.85,
          "delta_inches": 1.7763568394002505e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-east.nominal-envelope-thickness",
          "wall": "bed-east",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.normal-min",
          "wall": "bed-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 23.975000000000005,
          "observed_inches": 23.975,
          "delta_inches": -3.552713678800501e-15,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.normal-max",
          "wall": "bed-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 31.850000000000005,
          "observed_inches": 31.85,
          "delta_inches": -3.552713678800501e-15,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.nominal-envelope-thickness",
          "wall": "bed-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.normal-min",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 251.725,
          "observed_inches": 251.725,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.normal-max",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 259.6000000000001,
          "observed_inches": 259.6,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.nominal-envelope-thickness",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875000000000085,
          "observed_inches": 7.875000000000028,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.normal-min",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 187.85,
          "observed_inches": 187.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.normal-max",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 194.35,
          "observed_inches": 194.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.nominal-envelope-thickness",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.normal-min",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 332.46999999999997,
          "observed_inches": 332.35,
          "delta_inches": -0.1199999999999477,
          "status": "fail",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.normal-max",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 338.96999999999997,
          "observed_inches": 338.97,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.nominal-envelope-thickness",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.6200000000000045,
          "delta_inches": 0.12000000000000455,
          "status": "fail",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.normal-min",
          "wall": "bed-north",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 500.86999999999995,
          "observed_inches": 500.87,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.normal-max",
          "wall": "bed-north",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 508.74499999999995,
          "observed_inches": 508.745,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.nominal-envelope-thickness",
          "wall": "bed-north",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.normal-min",
          "wall": "hall-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 251.725,
          "observed_inches": 251.725,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.normal-max",
          "wall": "hall-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 258.2250000000001,
          "observed_inches": 258.225,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.nominal-envelope-thickness",
          "wall": "hall-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.500000000000085,
          "observed_inches": 6.500000000000028,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.normal-min",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 110.935,
          "observed_inches": 110.935,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.normal-max",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 118.81,
          "observed_inches": 118.81,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.nominal-envelope-thickness",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.normal-min",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 319.51,
          "observed_inches": 319.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.normal-max",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 326.01,
          "observed_inches": 326.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.nominal-envelope-thickness",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.normal-min",
          "wall": "powder-north",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 189.91,
          "observed_inches": 189.91,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.normal-max",
          "wall": "powder-north",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 194.41,
          "observed_inches": 194.41,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.nominal-envelope-thickness",
          "wall": "powder-north",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.entry-south.normal-min",
          "wall": "entry-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 162.975,
          "observed_inches": 162.975,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-south.normal-max",
          "wall": "entry-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 170.85,
          "observed_inches": 170.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-south.nominal-envelope-thickness",
          "wall": "entry-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-porch-east.normal-min",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 387.01,
          "observed_inches": 387.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-east.normal-max",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 396.135,
          "observed_inches": 396.135,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-east.nominal-envelope-thickness",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 9.125,
          "observed_inches": 9.125,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-west.normal-min",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 502.2050000000001,
          "observed_inches": 502.205,
          "delta_inches": -1.1368683772161603e-13,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.entry-porch-west.normal-max",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 510.0800000000001,
          "observed_inches": 510.08,
          "delta_inches": -1.1368683772161603e-13,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.entry-porch-west.nominal-envelope-thickness",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.nook-south.normal-min",
          "wall": "nook-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 456.32,
          "observed_inches": 456.32,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-south.normal-max",
          "wall": "nook-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 462.32,
          "observed_inches": 462.355,
          "delta_inches": 0.03500000000002501,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-south.nominal-envelope-thickness",
          "wall": "nook-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.0,
          "observed_inches": 6.035000000000025,
          "delta_inches": 0.03500000000002501,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-west.normal-min",
          "wall": "nook-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 368.40000000000003,
          "observed_inches": 368.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "main.nook-west.normal-max",
          "wall": "nook-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 374.40000000000003,
          "observed_inches": 374.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "main.nook-west.nominal-envelope-thickness",
          "wall": "nook-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.0,
          "observed_inches": 6.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "basement.foundation-east.normal-min",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 25.230000000000018,
          "observed_inches": 25.19487,
          "delta_inches": -0.03513000000001654,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-east.normal-max",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-east.nominal-envelope-thickness",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.285129999999995,
          "delta_inches": 0.03512999999999522,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.normal-min",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 25.149999999999995,
          "observed_inches": 25.11508,
          "delta_inches": -0.034919999999996065,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.normal-max",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 38.4,
          "observed_inches": 38.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.nominal-envelope-thickness",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.250000000000004,
          "observed_inches": 13.28492,
          "delta_inches": 0.034919999999996065,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-mech-west.normal-min",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 243.35500000000002,
          "observed_inches": 243.355,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-mech-west.normal-max",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 258.355,
          "observed_inches": 258.39453,
          "delta_inches": 0.039529999999956544,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-mech-west.nominal-envelope-thickness",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 15.0,
          "observed_inches": 15.039529999999985,
          "delta_inches": 0.039529999999984966,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-bath-south.normal-min",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 112.17499999999997,
          "observed_inches": 112.14008,
          "delta_inches": -0.034919999999971196,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-bath-south.normal-max",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 125.42499999999997,
          "observed_inches": 125.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-bath-south.nominal-envelope-thickness",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.28492,
          "delta_inches": 0.03491999999999962,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-entry-east.normal-min",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 376.355,
          "observed_inches": 376.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-east.normal-max",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 393.605,
          "observed_inches": 393.65046,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-east.nominal-envelope-thickness",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 17.25,
          "observed_inches": 17.29545999999999,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-north.normal-min",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 164.15000000000003,
          "observed_inches": 164.15,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-north.normal-max",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 181.4,
          "observed_inches": 181.44546,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-north.nominal-envelope-thickness",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 17.24999999999997,
          "observed_inches": 17.29545999999999,
          "delta_inches": 0.04546000000001982,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-west.normal-min",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 503.23,
          "observed_inches": 503.18956,
          "delta_inches": -0.04044000000004644,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-west.normal-max",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 518.48,
          "observed_inches": 518.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-west.nominal-envelope-thickness",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 15.25,
          "observed_inches": 15.290440000000046,
          "delta_inches": 0.04044000000004644,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-media-south.normal-min",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 136.15000000000003,
          "observed_inches": 136.11487,
          "delta_inches": -0.03513000000003785,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-media-south.normal-max",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 149.40000000000003,
          "observed_inches": 149.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-media-south.nominal-envelope-thickness",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.28513000000001,
          "delta_inches": 0.03513000000000943,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-west.normal-min",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.foundation-west.normal-max",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 722.855,
          "observed_inches": 722.88992,
          "delta_inches": 0.034919999999942775,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.foundation-west.nominal-envelope-thickness",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.284919999999943,
          "delta_inches": 0.034919999999942775,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.bedroom3-north.normal-min",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 500.65000000000003,
          "observed_inches": 500.65,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.bedroom3-north.normal-max",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 508.52500000000003,
          "observed_inches": 508.57493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.bedroom3-north.nominal-envelope-thickness",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924930000000018,
          "delta_inches": 0.04993000000001757,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.rec-north.normal-min",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 500.65000000000003,
          "observed_inches": 500.65,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.rec-north.normal-max",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 508.52500000000003,
          "observed_inches": 508.57493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.rec-north.nominal-envelope-thickness",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924930000000018,
          "delta_inches": 0.04993000000001757,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.walkout-north.normal-min",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 456.0,
          "observed_inches": 456.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-north.normal-max",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 463.875,
          "observed_inches": 463.92567,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-north.nominal-envelope-thickness",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.925670000000025,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-east.normal-min",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 251.73000000000002,
          "observed_inches": 251.73,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-east.normal-max",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 259.605,
          "observed_inches": 259.65493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-east.nominal-envelope-thickness",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924929999999989,
          "delta_inches": 0.04992999999998915,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.normal-min",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 366.355,
          "observed_inches": 366.30433,
          "delta_inches": -0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.normal-max",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.nominal-envelope-thickness",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.925670000000025,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.mech-bed4.normal-min",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 151.775,
          "observed_inches": 151.775,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-bed4.normal-max",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 158.275,
          "observed_inches": 158.275,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-bed4.nominal-envelope-thickness",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-hall.normal-min",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.mech-hall.normal-max",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.mech-hall.nominal-envelope-thickness",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.bath-east.normal-min",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 243.51,
          "observed_inches": 243.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.bath-east.normal-max",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 250.01,
          "observed_inches": 250.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.bath-east.nominal-envelope-thickness",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.normal-min",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 201.51,
          "observed_inches": 201.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.normal-max",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 206.01,
          "observed_inches": 206.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.nominal-envelope-thickness",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.bed4-hall.normal-min",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-hall.normal-max",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-hall.nominal-envelope-thickness",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-alcove.normal-min",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-alcove.normal-max",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-alcove.nominal-envelope-thickness",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-storage.normal-min",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 247.99,
          "observed_inches": 247.99,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-storage.normal-max",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 252.49,
          "observed_inches": 252.49,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-storage.nominal-envelope-thickness",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-ensuite.normal-min",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 300.40000000000003,
          "observed_inches": 300.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.bed4-ensuite.normal-max",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 304.90000000000003,
          "observed_inches": 304.9,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.bed4-ensuite.nominal-envelope-thickness",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.ensuite-wic.normal-min",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 161.99,
          "observed_inches": 161.99,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-wic.normal-max",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 168.49,
          "observed_inches": 168.49,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-wic.nominal-envelope-thickness",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-bedroom3.normal-min",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 370.90000000000003,
          "observed_inches": 370.9,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.ensuite-bedroom3.normal-max",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 377.40000000000003,
          "observed_inches": 377.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.ensuite-bedroom3.nominal-envelope-thickness",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.wing-hall.normal-min",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 251.73000000000002,
          "observed_inches": 251.73,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.wing-hall.normal-max",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 258.23,
          "observed_inches": 258.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.wing-hall.nominal-envelope-thickness",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.500000000000028,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.hall-laundry.normal-min",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 367.73,
          "observed_inches": 367.73,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.hall-laundry.normal-max",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.hall-laundry.nominal-envelope-thickness",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.laundry-north.normal-min",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 272.02500000000003,
          "observed_inches": 272.025,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-north.normal-max",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 278.52500000000003,
          "observed_inches": 278.525,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-north.nominal-envelope-thickness",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-media.normal-min",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 511.98,
          "observed_inches": 511.98,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.laundry-media.normal-max",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 518.48,
          "observed_inches": 518.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.laundry-media.nominal-envelope-thickness",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.media-rec.normal-min",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 272.02500000000003,
          "observed_inches": 272.025,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.media-rec.normal-max",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 278.52500000000003,
          "observed_inches": 278.525,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.media-rec.nominal-envelope-thickness",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.rec-hall.normal-min",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 367.73,
          "observed_inches": 367.73,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "basement.rec-hall.normal-max",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "basement.rec-hall.nominal-envelope-thickness",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "main.bath-hall-nov03.normal-min",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 181.35,
          "observed_inches": 181.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "main.bath-hall-nov03.normal-max",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 185.85,
          "observed_inches": 185.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "main.bath-hall-nov03.nominal-envelope-thickness",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "basement.media-B1-lining.normal-min",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 707.605,
          "observed_inches": 707.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.media-B1-lining.normal-max",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.media-B1-lining.nominal-envelope-thickness",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.rec-B1-lining.normal-min",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 707.605,
          "observed_inches": 707.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.rec-B1-lining.normal-max",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.rec-B1-lining.nominal-envelope-thickness",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.media-south-B1-lining.normal-min",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 149.40000000000003,
          "observed_inches": 149.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.media-south-B1-lining.normal-max",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 151.40000000000003,
          "observed_inches": 151.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.media-south-B1-lining.nominal-envelope-thickness",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.wing-east-B1-lining.normal-min",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.wing-east-B1-lining.normal-max",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 40.48000000000002,
          "observed_inches": 40.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.wing-east-B1-lining.nominal-envelope-thickness",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.mech-south-B1-lining.normal-min",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.4,
          "observed_inches": 38.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.mech-south-B1-lining.normal-max",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 40.4,
          "observed_inches": 40.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.mech-south-B1-lining.nominal-envelope-thickness",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.normal-min",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.normal-max",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 42.48000000000002,
          "observed_inches": 42.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.nominal-envelope-thickness",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.0,
          "observed_inches": 4.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bath-south-finish-lining.normal-min",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 125.42499999999997,
          "observed_inches": 125.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-south-finish-lining.normal-max",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 129.42499999999998,
          "observed_inches": 129.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-south-finish-lining.nominal-envelope-thickness",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.000000000000014,
          "observed_inches": 4.000000000000014,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-laundry-return.normal-min",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 376.355,
          "observed_inches": 376.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "basement.bath-laundry-return.normal-max",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 382.855,
          "observed_inches": 382.855,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "basement.bath-laundry-return.nominal-envelope-thickness",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "main.registered-west-E1.normal-min",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 716.48,
          "observed_inches": 716.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-west-E1.normal-max",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 724.355,
          "observed_inches": 724.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-west-E1.nominal-envelope-thickness",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-kitchen-south-E1.normal-min",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 134.925,
          "observed_inches": 134.925,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-kitchen-south-E1.normal-max",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 142.8,
          "observed_inches": 142.8,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-kitchen-south-E1.nominal-envelope-thickness",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-lake-E1.normal-min",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 500.87999999999994,
          "observed_inches": 500.88,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.registered-lake-E1.normal-max",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 508.75499999999994,
          "observed_inches": 508.755,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.registered-lake-E1.nominal-envelope-thickness",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.primary-WC-west.normal-min",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 138.85,
          "observed_inches": 138.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-west.normal-max",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 143.35,
          "observed_inches": 143.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-west.nominal-envelope-thickness",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.normal-min",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 260.84999999999997,
          "observed_inches": 260.85,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.normal-max",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 265.34999999999997,
          "observed_inches": 265.35,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.nominal-envelope-thickness",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        }
      ],
      "frames": [
        {
          "tag": "W100",
          "room": "bedroom2",
          "observed_inches": {
            "width": 25.0,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W101",
          "room": "bedroom2",
          "observed_inches": {
            "width": 99.00000000000001,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 99,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W102",
          "room": "bedroom2",
          "observed_inches": {
            "width": 99.00000000000001,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 99,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W103",
          "room": "primary-bathroom",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W104",
          "room": "primary-bathroom",
          "observed_inches": {
            "width": 72.00000000000003,
            "high-height": 96.0,
            "physical-depth": 5.625
          },
          "expected_programme_inches": {
            "width": 72,
            "high-height": 96,
            "physical-depth": 5.625
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W105",
          "room": "bedroom1",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W106",
          "room": "bedroom1",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W110",
          "room": "boot-room",
          "observed_inches": {
            "width": 25.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W111",
          "room": "powder-room",
          "observed_inches": {
            "width": 25.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W001",
          "room": "bedroom4",
          "observed_inches": {
            "width": 60.00000000000003,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W002",
          "room": "ensuite3",
          "observed_inches": {
            "width": 25.0,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W003",
          "room": "bedroom3",
          "observed_inches": {
            "width": 138.9375,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 138.9375,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W004",
          "room": "rec-room",
          "observed_inches": {
            "width": 145.125,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.125,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W005",
          "room": "rec-room",
          "observed_inches": {
            "width": 145.125,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.125,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W006",
          "room": "rec-room",
          "observed_inches": {
            "width": 27.0,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E002",
          "room": "lower-entry",
          "observed_inches": {
            "width": 70.625,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "expected_programme_inches": {
            "width": 70.625,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E004",
          "room": "rec-room",
          "observed_inches": {
            "width": 38.0,
            "high-height": 95.5,
            "physical-depth": 6.625
          },
          "expected_programme_inches": {
            "width": 38,
            "high-height": 95.5,
            "physical-depth": 6.625
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E100",
          "room": "bedroom1",
          "observed_inches": {
            "width": 139.1875,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "expected_programme_inches": {
            "width": 139.1875,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W112",
          "room": "kitchen",
          "observed_inches": {
            "width": 144.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 144,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW100",
          "room": "bedroom1",
          "observed_inches": {
            "width": 47.3125,
            "high-height": 24.25,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 47.3125,
            "high-height": 24.25,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW101",
          "room": "bedroom1",
          "observed_inches": {
            "width": 44.5625,
            "high-height": 27.9375,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 44.5625,
            "high-height": 27.9375,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW102",
          "room": "bedroom1",
          "observed_inches": {
            "width": 47.3125,
            "high-height": 31.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 47.3125,
            "high-height": 31.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W109",
          "room": "greatroom",
          "observed_inches": {
            "width": 27.0,
            "high-height": 72.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 72,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW106",
          "room": "greatroom",
          "observed_inches": {
            "width": 60.0,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW107",
          "room": "greatroom",
          "observed_inches": {
            "width": 60.0,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW105",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW104",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 25.125,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 25.125,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW103",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 21.375,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 21.375,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-west-lower",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 95.98425,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047247,
            "high-height": 95.98425196850394,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-west-upper",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 68.97637999999998,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047247,
            "high-height": 68.97637795275591,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-east-lower",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 95.98425,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047242,
            "high-height": 95.98425196850394,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-east-upper",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 54.84252000000001,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047242,
            "high-height": 54.84251968503935,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W007",
          "room": "rec-room",
          "observed_inches": {
            "width": 24.0,
            "high-height": 72.0,
            "physical-depth": 5.439999999999998
          },
          "expected_programme_inches": {
            "width": 24,
            "high-height": 72,
            "physical-depth": 5.44
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Primary baseline nominal opening, Nov11addition confirmed; actual updated supplier frame/profile unresolved",
          "status": "pass"
        },
        {
          "tag": "W108",
          "room": "greatroom",
          "observed_inches": {
            "width": 27.0,
            "high-height": 72.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 72,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Quoted nominal27x72casement /4.5in frame; centre from primaryA102jambs, mounting depth retained as explicit study registration",
          "status": "pass"
        },
        {
          "tag": "EST-B3-WOODS-01",
          "room": "bedroom3",
          "observed_inches": {
            "width": 25.0,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "owner-authorized estimated design position / matching proposed family size",
          "status": "pass"
        }
      ],
      "critical_openings": [
        {
          "id": "rec-room.E004.ICF-width",
          "expected_inches": 44,
          "observed_inches": 44.0,
          "actual_slice": {
            "width_inches": 44.0,
            "bounds": [
              281.8,
              50.0,
              325.8,
              50.0
            ],
            "normal_planes": [
              709.605,
              722.855,
              722.88992
            ]
          },
          "status": "pass"
        },
        {
          "id": "rec-room.E004.framed-width",
          "expected_inches": 39,
          "observed_inches": 39.0,
          "status": "pass"
        },
        {
          "id": "greatroom.E101.rough-width",
          "expected_inches": 131.75,
          "observed_inches": 131.75,
          "actual_slice": {
            "width_inches": 131.75,
            "bounds": [
              284.57,
              200.0,
              416.32,
              200.0
            ],
            "normal_planes": [
              716.48,
              724.355
            ]
          },
          "status": "pass"
        }
      ],
      "face_integrity": {
        "unique_face_ids": true,
        "face_count": 68103,
        "invalid_or_zero_faces": []
      },
      "whole_model_qualified": false,
      "image_generation_allowed": false,
      "owner_approval": null
    },
    {
      "mode": "espresso-open",
      "model_sha256": "1f5b9922e9211298f11e10e98cbef5798ca48292a143497ea00abf746c03ed20",
      "source_plan_sha256_matches": true,
      "canonical_arrays_match": true,
      "walls": [
        {
          "id": "main.bed-east.normal-min",
          "wall": "bed-east",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 23.974999999999984,
          "observed_inches": 23.975,
          "delta_inches": 1.7763568394002505e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-east.normal-max",
          "wall": "bed-east",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 31.849999999999984,
          "observed_inches": 31.85,
          "delta_inches": 1.7763568394002505e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-east.nominal-envelope-thickness",
          "wall": "bed-east",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.normal-min",
          "wall": "bed-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 23.975000000000005,
          "observed_inches": 23.975,
          "delta_inches": -3.552713678800501e-15,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.normal-max",
          "wall": "bed-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 31.850000000000005,
          "observed_inches": 31.85,
          "delta_inches": -3.552713678800501e-15,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.nominal-envelope-thickness",
          "wall": "bed-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.normal-min",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 251.725,
          "observed_inches": 251.725,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.normal-max",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 259.6000000000001,
          "observed_inches": 259.6,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.nominal-envelope-thickness",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875000000000085,
          "observed_inches": 7.875000000000028,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.normal-min",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 187.85,
          "observed_inches": 187.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.normal-max",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 194.35,
          "observed_inches": 194.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.nominal-envelope-thickness",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.normal-min",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 332.46999999999997,
          "observed_inches": 332.35,
          "delta_inches": -0.1199999999999477,
          "status": "fail",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.normal-max",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 338.96999999999997,
          "observed_inches": 338.97,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.nominal-envelope-thickness",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.6200000000000045,
          "delta_inches": 0.12000000000000455,
          "status": "fail",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.normal-min",
          "wall": "bed-north",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 500.86999999999995,
          "observed_inches": 500.87,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.normal-max",
          "wall": "bed-north",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 508.74499999999995,
          "observed_inches": 508.745,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.nominal-envelope-thickness",
          "wall": "bed-north",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.normal-min",
          "wall": "hall-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 251.725,
          "observed_inches": 251.725,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.normal-max",
          "wall": "hall-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 258.2250000000001,
          "observed_inches": 258.225,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.nominal-envelope-thickness",
          "wall": "hall-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.500000000000085,
          "observed_inches": 6.500000000000028,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.normal-min",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 110.935,
          "observed_inches": 110.935,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.normal-max",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 118.81,
          "observed_inches": 118.81,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.nominal-envelope-thickness",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.normal-min",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 319.51,
          "observed_inches": 319.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.normal-max",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 326.01,
          "observed_inches": 326.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.nominal-envelope-thickness",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.normal-min",
          "wall": "powder-north",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 189.91,
          "observed_inches": 189.91,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.normal-max",
          "wall": "powder-north",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 194.41,
          "observed_inches": 194.41,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.nominal-envelope-thickness",
          "wall": "powder-north",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.entry-south.normal-min",
          "wall": "entry-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 162.975,
          "observed_inches": 162.975,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-south.normal-max",
          "wall": "entry-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 170.85,
          "observed_inches": 170.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-south.nominal-envelope-thickness",
          "wall": "entry-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-porch-east.normal-min",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 387.01,
          "observed_inches": 387.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-east.normal-max",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 396.135,
          "observed_inches": 396.135,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-east.nominal-envelope-thickness",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 9.125,
          "observed_inches": 9.125,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-west.normal-min",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 502.2050000000001,
          "observed_inches": 502.205,
          "delta_inches": -1.1368683772161603e-13,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.entry-porch-west.normal-max",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 510.0800000000001,
          "observed_inches": 510.08,
          "delta_inches": -1.1368683772161603e-13,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.entry-porch-west.nominal-envelope-thickness",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.nook-south.normal-min",
          "wall": "nook-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 456.32,
          "observed_inches": 456.32,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-south.normal-max",
          "wall": "nook-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 462.32,
          "observed_inches": 462.355,
          "delta_inches": 0.03500000000002501,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-south.nominal-envelope-thickness",
          "wall": "nook-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.0,
          "observed_inches": 6.035000000000025,
          "delta_inches": 0.03500000000002501,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-west.normal-min",
          "wall": "nook-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 368.40000000000003,
          "observed_inches": 368.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "main.nook-west.normal-max",
          "wall": "nook-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 374.40000000000003,
          "observed_inches": 374.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "main.nook-west.nominal-envelope-thickness",
          "wall": "nook-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.0,
          "observed_inches": 6.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "basement.foundation-east.normal-min",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 25.230000000000018,
          "observed_inches": 25.19487,
          "delta_inches": -0.03513000000001654,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-east.normal-max",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-east.nominal-envelope-thickness",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.285129999999995,
          "delta_inches": 0.03512999999999522,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.normal-min",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 25.149999999999995,
          "observed_inches": 25.11508,
          "delta_inches": -0.034919999999996065,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.normal-max",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 38.4,
          "observed_inches": 38.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.nominal-envelope-thickness",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.250000000000004,
          "observed_inches": 13.28492,
          "delta_inches": 0.034919999999996065,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-mech-west.normal-min",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 243.35500000000002,
          "observed_inches": 243.355,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-mech-west.normal-max",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 258.355,
          "observed_inches": 258.39453,
          "delta_inches": 0.039529999999956544,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-mech-west.nominal-envelope-thickness",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 15.0,
          "observed_inches": 15.039529999999985,
          "delta_inches": 0.039529999999984966,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-bath-south.normal-min",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 112.17499999999997,
          "observed_inches": 112.14008,
          "delta_inches": -0.034919999999971196,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-bath-south.normal-max",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 125.42499999999997,
          "observed_inches": 125.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-bath-south.nominal-envelope-thickness",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.28492,
          "delta_inches": 0.03491999999999962,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-entry-east.normal-min",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 376.355,
          "observed_inches": 376.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-east.normal-max",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 393.605,
          "observed_inches": 393.65046,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-east.nominal-envelope-thickness",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 17.25,
          "observed_inches": 17.29545999999999,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-north.normal-min",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 164.15000000000003,
          "observed_inches": 164.15,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-north.normal-max",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 181.4,
          "observed_inches": 181.44546,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-north.nominal-envelope-thickness",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 17.24999999999997,
          "observed_inches": 17.29545999999999,
          "delta_inches": 0.04546000000001982,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-west.normal-min",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 503.23,
          "observed_inches": 503.18956,
          "delta_inches": -0.04044000000004644,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-west.normal-max",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 518.48,
          "observed_inches": 518.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-west.nominal-envelope-thickness",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 15.25,
          "observed_inches": 15.290440000000046,
          "delta_inches": 0.04044000000004644,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-media-south.normal-min",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 136.15000000000003,
          "observed_inches": 136.11487,
          "delta_inches": -0.03513000000003785,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-media-south.normal-max",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 149.40000000000003,
          "observed_inches": 149.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-media-south.nominal-envelope-thickness",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.28513000000001,
          "delta_inches": 0.03513000000000943,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-west.normal-min",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.foundation-west.normal-max",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 722.855,
          "observed_inches": 722.88992,
          "delta_inches": 0.034919999999942775,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.foundation-west.nominal-envelope-thickness",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.284919999999943,
          "delta_inches": 0.034919999999942775,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.bedroom3-north.normal-min",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 500.65000000000003,
          "observed_inches": 500.65,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.bedroom3-north.normal-max",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 508.52500000000003,
          "observed_inches": 508.57493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.bedroom3-north.nominal-envelope-thickness",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924930000000018,
          "delta_inches": 0.04993000000001757,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.rec-north.normal-min",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 500.65000000000003,
          "observed_inches": 500.65,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.rec-north.normal-max",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 508.52500000000003,
          "observed_inches": 508.57493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.rec-north.nominal-envelope-thickness",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924930000000018,
          "delta_inches": 0.04993000000001757,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.walkout-north.normal-min",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 456.0,
          "observed_inches": 456.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-north.normal-max",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 463.875,
          "observed_inches": 463.92567,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-north.nominal-envelope-thickness",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.925670000000025,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-east.normal-min",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 251.73000000000002,
          "observed_inches": 251.73,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-east.normal-max",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 259.605,
          "observed_inches": 259.65493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-east.nominal-envelope-thickness",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924929999999989,
          "delta_inches": 0.04992999999998915,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.normal-min",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 366.355,
          "observed_inches": 366.30433,
          "delta_inches": -0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.normal-max",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.nominal-envelope-thickness",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.925670000000025,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.mech-bed4.normal-min",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 151.775,
          "observed_inches": 151.775,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-bed4.normal-max",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 158.275,
          "observed_inches": 158.275,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-bed4.nominal-envelope-thickness",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-hall.normal-min",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.mech-hall.normal-max",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.mech-hall.nominal-envelope-thickness",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.bath-east.normal-min",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 243.51,
          "observed_inches": 243.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.bath-east.normal-max",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 250.01,
          "observed_inches": 250.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.bath-east.nominal-envelope-thickness",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.normal-min",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 201.51,
          "observed_inches": 201.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.normal-max",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 206.01,
          "observed_inches": 206.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.nominal-envelope-thickness",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.bed4-hall.normal-min",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-hall.normal-max",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-hall.nominal-envelope-thickness",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-alcove.normal-min",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-alcove.normal-max",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-alcove.nominal-envelope-thickness",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-storage.normal-min",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 247.99,
          "observed_inches": 247.99,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-storage.normal-max",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 252.49,
          "observed_inches": 252.49,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-storage.nominal-envelope-thickness",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-ensuite.normal-min",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 300.40000000000003,
          "observed_inches": 300.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.bed4-ensuite.normal-max",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 304.90000000000003,
          "observed_inches": 304.9,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.bed4-ensuite.nominal-envelope-thickness",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.ensuite-wic.normal-min",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 161.99,
          "observed_inches": 161.99,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-wic.normal-max",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 168.49,
          "observed_inches": 168.49,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-wic.nominal-envelope-thickness",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-bedroom3.normal-min",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 370.90000000000003,
          "observed_inches": 370.9,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.ensuite-bedroom3.normal-max",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 377.40000000000003,
          "observed_inches": 377.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.ensuite-bedroom3.nominal-envelope-thickness",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.wing-hall.normal-min",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 251.73000000000002,
          "observed_inches": 251.73,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.wing-hall.normal-max",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 258.23,
          "observed_inches": 258.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.wing-hall.nominal-envelope-thickness",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.500000000000028,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.hall-laundry.normal-min",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 367.73,
          "observed_inches": 367.73,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.hall-laundry.normal-max",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.hall-laundry.nominal-envelope-thickness",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.laundry-north.normal-min",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 272.02500000000003,
          "observed_inches": 272.025,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-north.normal-max",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 278.52500000000003,
          "observed_inches": 278.525,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-north.nominal-envelope-thickness",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-media.normal-min",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 511.98,
          "observed_inches": 511.98,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.laundry-media.normal-max",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 518.48,
          "observed_inches": 518.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.laundry-media.nominal-envelope-thickness",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.media-rec.normal-min",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 272.02500000000003,
          "observed_inches": 272.025,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.media-rec.normal-max",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 278.52500000000003,
          "observed_inches": 278.525,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.media-rec.nominal-envelope-thickness",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.rec-hall.normal-min",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 367.73,
          "observed_inches": 367.73,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "basement.rec-hall.normal-max",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "basement.rec-hall.nominal-envelope-thickness",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "main.bath-hall-nov03.normal-min",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 181.35,
          "observed_inches": 181.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "main.bath-hall-nov03.normal-max",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 185.85,
          "observed_inches": 185.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "main.bath-hall-nov03.nominal-envelope-thickness",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "basement.media-B1-lining.normal-min",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 707.605,
          "observed_inches": 707.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.media-B1-lining.normal-max",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.media-B1-lining.nominal-envelope-thickness",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.rec-B1-lining.normal-min",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 707.605,
          "observed_inches": 707.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.rec-B1-lining.normal-max",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.rec-B1-lining.nominal-envelope-thickness",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.media-south-B1-lining.normal-min",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 149.40000000000003,
          "observed_inches": 149.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.media-south-B1-lining.normal-max",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 151.40000000000003,
          "observed_inches": 151.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.media-south-B1-lining.nominal-envelope-thickness",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.wing-east-B1-lining.normal-min",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.wing-east-B1-lining.normal-max",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 40.48000000000002,
          "observed_inches": 40.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.wing-east-B1-lining.nominal-envelope-thickness",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.mech-south-B1-lining.normal-min",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.4,
          "observed_inches": 38.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.mech-south-B1-lining.normal-max",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 40.4,
          "observed_inches": 40.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.mech-south-B1-lining.nominal-envelope-thickness",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.normal-min",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.normal-max",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 42.48000000000002,
          "observed_inches": 42.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.nominal-envelope-thickness",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.0,
          "observed_inches": 4.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bath-south-finish-lining.normal-min",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 125.42499999999997,
          "observed_inches": 125.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-south-finish-lining.normal-max",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 129.42499999999998,
          "observed_inches": 129.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-south-finish-lining.nominal-envelope-thickness",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.000000000000014,
          "observed_inches": 4.000000000000014,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-laundry-return.normal-min",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 376.355,
          "observed_inches": 376.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "basement.bath-laundry-return.normal-max",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 382.855,
          "observed_inches": 382.855,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "basement.bath-laundry-return.nominal-envelope-thickness",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "main.registered-west-E1.normal-min",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 716.48,
          "observed_inches": 716.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-west-E1.normal-max",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 724.355,
          "observed_inches": 724.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-west-E1.nominal-envelope-thickness",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-kitchen-south-E1.normal-min",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 134.925,
          "observed_inches": 134.925,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-kitchen-south-E1.normal-max",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 142.8,
          "observed_inches": 142.8,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-kitchen-south-E1.nominal-envelope-thickness",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-lake-E1.normal-min",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 500.87999999999994,
          "observed_inches": 500.88,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.registered-lake-E1.normal-max",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 508.75499999999994,
          "observed_inches": 508.755,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.registered-lake-E1.nominal-envelope-thickness",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.primary-WC-west.normal-min",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 138.85,
          "observed_inches": 138.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-west.normal-max",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 143.35,
          "observed_inches": 143.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-west.nominal-envelope-thickness",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.normal-min",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 260.84999999999997,
          "observed_inches": 260.85,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.normal-max",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 265.34999999999997,
          "observed_inches": 265.35,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.nominal-envelope-thickness",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        }
      ],
      "frames": [
        {
          "tag": "W100",
          "room": "bedroom2",
          "observed_inches": {
            "width": 25.0,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W101",
          "room": "bedroom2",
          "observed_inches": {
            "width": 99.00000000000001,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 99,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W102",
          "room": "bedroom2",
          "observed_inches": {
            "width": 99.00000000000001,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 99,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W103",
          "room": "primary-bathroom",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W104",
          "room": "primary-bathroom",
          "observed_inches": {
            "width": 72.00000000000003,
            "high-height": 96.0,
            "physical-depth": 5.625
          },
          "expected_programme_inches": {
            "width": 72,
            "high-height": 96,
            "physical-depth": 5.625
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W105",
          "room": "bedroom1",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W106",
          "room": "bedroom1",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W110",
          "room": "boot-room",
          "observed_inches": {
            "width": 25.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W111",
          "room": "powder-room",
          "observed_inches": {
            "width": 25.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W001",
          "room": "bedroom4",
          "observed_inches": {
            "width": 60.00000000000003,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W002",
          "room": "ensuite3",
          "observed_inches": {
            "width": 25.0,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W003",
          "room": "bedroom3",
          "observed_inches": {
            "width": 138.9375,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 138.9375,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W004",
          "room": "rec-room",
          "observed_inches": {
            "width": 145.125,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.125,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W005",
          "room": "rec-room",
          "observed_inches": {
            "width": 145.125,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.125,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W006",
          "room": "rec-room",
          "observed_inches": {
            "width": 27.0,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E002",
          "room": "lower-entry",
          "observed_inches": {
            "width": 70.625,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "expected_programme_inches": {
            "width": 70.625,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E004",
          "room": "rec-room",
          "observed_inches": {
            "width": 38.0,
            "high-height": 95.5,
            "physical-depth": 6.625
          },
          "expected_programme_inches": {
            "width": 38,
            "high-height": 95.5,
            "physical-depth": 6.625
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E100",
          "room": "bedroom1",
          "observed_inches": {
            "width": 139.1875,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "expected_programme_inches": {
            "width": 139.1875,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W112",
          "room": "kitchen",
          "observed_inches": {
            "width": 144.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 144,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW100",
          "room": "bedroom1",
          "observed_inches": {
            "width": 47.3125,
            "high-height": 24.25,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 47.3125,
            "high-height": 24.25,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW101",
          "room": "bedroom1",
          "observed_inches": {
            "width": 44.5625,
            "high-height": 27.9375,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 44.5625,
            "high-height": 27.9375,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW102",
          "room": "bedroom1",
          "observed_inches": {
            "width": 47.3125,
            "high-height": 31.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 47.3125,
            "high-height": 31.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W109",
          "room": "greatroom",
          "observed_inches": {
            "width": 27.0,
            "high-height": 72.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 72,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW106",
          "room": "greatroom",
          "observed_inches": {
            "width": 60.0,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW107",
          "room": "greatroom",
          "observed_inches": {
            "width": 60.0,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW105",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW104",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 25.125,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 25.125,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW103",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 21.375,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 21.375,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-west-lower",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 95.98425,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047247,
            "high-height": 95.98425196850394,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-west-upper",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 68.97637999999998,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047247,
            "high-height": 68.97637795275591,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-east-lower",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 95.98425,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047242,
            "high-height": 95.98425196850394,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-east-upper",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 54.84252000000001,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047242,
            "high-height": 54.84251968503935,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W007",
          "room": "rec-room",
          "observed_inches": {
            "width": 24.0,
            "high-height": 72.0,
            "physical-depth": 5.439999999999998
          },
          "expected_programme_inches": {
            "width": 24,
            "high-height": 72,
            "physical-depth": 5.44
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Primary baseline nominal opening, Nov11addition confirmed; actual updated supplier frame/profile unresolved",
          "status": "pass"
        },
        {
          "tag": "W108",
          "room": "greatroom",
          "observed_inches": {
            "width": 27.0,
            "high-height": 72.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 72,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Quoted nominal27x72casement /4.5in frame; centre from primaryA102jambs, mounting depth retained as explicit study registration",
          "status": "pass"
        },
        {
          "tag": "EST-B3-WOODS-01",
          "room": "bedroom3",
          "observed_inches": {
            "width": 25.0,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "owner-authorized estimated design position / matching proposed family size",
          "status": "pass"
        }
      ],
      "critical_openings": [
        {
          "id": "rec-room.E004.ICF-width",
          "expected_inches": 44,
          "observed_inches": 44.0,
          "actual_slice": {
            "width_inches": 44.0,
            "bounds": [
              281.8,
              50.0,
              325.8,
              50.0
            ],
            "normal_planes": [
              709.605,
              722.855,
              722.88992
            ]
          },
          "status": "pass"
        },
        {
          "id": "rec-room.E004.framed-width",
          "expected_inches": 39,
          "observed_inches": 39.0,
          "status": "pass"
        },
        {
          "id": "greatroom.E101.rough-width",
          "expected_inches": 131.75,
          "observed_inches": 131.75,
          "actual_slice": {
            "width_inches": 131.75,
            "bounds": [
              284.57,
              200.0,
              416.32,
              200.0
            ],
            "normal_planes": [
              716.48,
              724.355
            ]
          },
          "status": "pass"
        }
      ],
      "face_integrity": {
        "unique_face_ids": true,
        "face_count": 68120,
        "invalid_or_zero_faces": []
      },
      "whole_model_qualified": false,
      "image_generation_allowed": false,
      "owner_approval": null
    },
    {
      "mode": "alcohol-open",
      "model_sha256": "508342117f4cba7b8262a8ef4f5179bdd69d4e961b09a0f39f3b1600b19b4a16",
      "source_plan_sha256_matches": true,
      "canonical_arrays_match": true,
      "walls": [
        {
          "id": "main.bed-east.normal-min",
          "wall": "bed-east",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 23.974999999999984,
          "observed_inches": 23.975,
          "delta_inches": 1.7763568394002505e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-east.normal-max",
          "wall": "bed-east",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 31.849999999999984,
          "observed_inches": 31.85,
          "delta_inches": 1.7763568394002505e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-east.nominal-envelope-thickness",
          "wall": "bed-east",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.normal-min",
          "wall": "bed-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 23.975000000000005,
          "observed_inches": 23.975,
          "delta_inches": -3.552713678800501e-15,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.normal-max",
          "wall": "bed-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 31.850000000000005,
          "observed_inches": 31.85,
          "delta_inches": -3.552713678800501e-15,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.nominal-envelope-thickness",
          "wall": "bed-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.normal-min",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 251.725,
          "observed_inches": 251.725,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.normal-max",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 259.6000000000001,
          "observed_inches": 259.6,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.nominal-envelope-thickness",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875000000000085,
          "observed_inches": 7.875000000000028,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.normal-min",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 187.85,
          "observed_inches": 187.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.normal-max",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 194.35,
          "observed_inches": 194.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.nominal-envelope-thickness",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.normal-min",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 332.46999999999997,
          "observed_inches": 332.35,
          "delta_inches": -0.1199999999999477,
          "status": "fail",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.normal-max",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 338.96999999999997,
          "observed_inches": 338.97,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.nominal-envelope-thickness",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.6200000000000045,
          "delta_inches": 0.12000000000000455,
          "status": "fail",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.normal-min",
          "wall": "bed-north",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 500.86999999999995,
          "observed_inches": 500.87,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.normal-max",
          "wall": "bed-north",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 508.74499999999995,
          "observed_inches": 508.745,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.nominal-envelope-thickness",
          "wall": "bed-north",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.normal-min",
          "wall": "hall-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 251.725,
          "observed_inches": 251.725,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.normal-max",
          "wall": "hall-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 258.2250000000001,
          "observed_inches": 258.225,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.nominal-envelope-thickness",
          "wall": "hall-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.500000000000085,
          "observed_inches": 6.500000000000028,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.normal-min",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 110.935,
          "observed_inches": 110.935,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.normal-max",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 118.81,
          "observed_inches": 118.81,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.nominal-envelope-thickness",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.normal-min",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 319.51,
          "observed_inches": 319.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.normal-max",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 326.01,
          "observed_inches": 326.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.nominal-envelope-thickness",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.normal-min",
          "wall": "powder-north",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 189.91,
          "observed_inches": 189.91,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.normal-max",
          "wall": "powder-north",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 194.41,
          "observed_inches": 194.41,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.nominal-envelope-thickness",
          "wall": "powder-north",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.entry-south.normal-min",
          "wall": "entry-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 162.975,
          "observed_inches": 162.975,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-south.normal-max",
          "wall": "entry-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 170.85,
          "observed_inches": 170.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-south.nominal-envelope-thickness",
          "wall": "entry-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-porch-east.normal-min",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 387.01,
          "observed_inches": 387.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-east.normal-max",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 396.135,
          "observed_inches": 396.135,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-east.nominal-envelope-thickness",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 9.125,
          "observed_inches": 9.125,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-west.normal-min",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 502.2050000000001,
          "observed_inches": 502.205,
          "delta_inches": -1.1368683772161603e-13,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.entry-porch-west.normal-max",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 510.0800000000001,
          "observed_inches": 510.08,
          "delta_inches": -1.1368683772161603e-13,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.entry-porch-west.nominal-envelope-thickness",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.nook-south.normal-min",
          "wall": "nook-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 456.32,
          "observed_inches": 456.32,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-south.normal-max",
          "wall": "nook-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 462.32,
          "observed_inches": 462.355,
          "delta_inches": 0.03500000000002501,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-south.nominal-envelope-thickness",
          "wall": "nook-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.0,
          "observed_inches": 6.035000000000025,
          "delta_inches": 0.03500000000002501,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-west.normal-min",
          "wall": "nook-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 368.40000000000003,
          "observed_inches": 368.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "main.nook-west.normal-max",
          "wall": "nook-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 374.40000000000003,
          "observed_inches": 374.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "main.nook-west.nominal-envelope-thickness",
          "wall": "nook-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.0,
          "observed_inches": 6.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "basement.foundation-east.normal-min",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 25.230000000000018,
          "observed_inches": 25.19487,
          "delta_inches": -0.03513000000001654,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-east.normal-max",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-east.nominal-envelope-thickness",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.285129999999995,
          "delta_inches": 0.03512999999999522,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.normal-min",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 25.149999999999995,
          "observed_inches": 25.11508,
          "delta_inches": -0.034919999999996065,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.normal-max",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 38.4,
          "observed_inches": 38.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.nominal-envelope-thickness",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.250000000000004,
          "observed_inches": 13.28492,
          "delta_inches": 0.034919999999996065,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-mech-west.normal-min",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 243.35500000000002,
          "observed_inches": 243.355,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-mech-west.normal-max",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 258.355,
          "observed_inches": 258.39453,
          "delta_inches": 0.039529999999956544,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-mech-west.nominal-envelope-thickness",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 15.0,
          "observed_inches": 15.039529999999985,
          "delta_inches": 0.039529999999984966,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-bath-south.normal-min",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 112.17499999999997,
          "observed_inches": 112.14008,
          "delta_inches": -0.034919999999971196,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-bath-south.normal-max",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 125.42499999999997,
          "observed_inches": 125.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-bath-south.nominal-envelope-thickness",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.28492,
          "delta_inches": 0.03491999999999962,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-entry-east.normal-min",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 376.355,
          "observed_inches": 376.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-east.normal-max",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 393.605,
          "observed_inches": 393.65046,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-east.nominal-envelope-thickness",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 17.25,
          "observed_inches": 17.29545999999999,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-north.normal-min",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 164.15000000000003,
          "observed_inches": 164.15,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-north.normal-max",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 181.4,
          "observed_inches": 181.44546,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-north.nominal-envelope-thickness",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 17.24999999999997,
          "observed_inches": 17.29545999999999,
          "delta_inches": 0.04546000000001982,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-west.normal-min",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 503.23,
          "observed_inches": 503.18956,
          "delta_inches": -0.04044000000004644,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-west.normal-max",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 518.48,
          "observed_inches": 518.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-west.nominal-envelope-thickness",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 15.25,
          "observed_inches": 15.290440000000046,
          "delta_inches": 0.04044000000004644,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-media-south.normal-min",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 136.15000000000003,
          "observed_inches": 136.11487,
          "delta_inches": -0.03513000000003785,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-media-south.normal-max",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 149.40000000000003,
          "observed_inches": 149.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-media-south.nominal-envelope-thickness",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.28513000000001,
          "delta_inches": 0.03513000000000943,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-west.normal-min",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.foundation-west.normal-max",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 722.855,
          "observed_inches": 722.88992,
          "delta_inches": 0.034919999999942775,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.foundation-west.nominal-envelope-thickness",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.284919999999943,
          "delta_inches": 0.034919999999942775,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.bedroom3-north.normal-min",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 500.65000000000003,
          "observed_inches": 500.65,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.bedroom3-north.normal-max",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 508.52500000000003,
          "observed_inches": 508.57493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.bedroom3-north.nominal-envelope-thickness",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924930000000018,
          "delta_inches": 0.04993000000001757,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.rec-north.normal-min",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 500.65000000000003,
          "observed_inches": 500.65,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.rec-north.normal-max",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 508.52500000000003,
          "observed_inches": 508.57493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.rec-north.nominal-envelope-thickness",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924930000000018,
          "delta_inches": 0.04993000000001757,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.walkout-north.normal-min",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 456.0,
          "observed_inches": 456.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-north.normal-max",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 463.875,
          "observed_inches": 463.92567,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-north.nominal-envelope-thickness",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.925670000000025,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-east.normal-min",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 251.73000000000002,
          "observed_inches": 251.73,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-east.normal-max",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 259.605,
          "observed_inches": 259.65493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-east.nominal-envelope-thickness",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924929999999989,
          "delta_inches": 0.04992999999998915,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.normal-min",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 366.355,
          "observed_inches": 366.30433,
          "delta_inches": -0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.normal-max",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.nominal-envelope-thickness",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.925670000000025,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.mech-bed4.normal-min",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 151.775,
          "observed_inches": 151.775,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-bed4.normal-max",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 158.275,
          "observed_inches": 158.275,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-bed4.nominal-envelope-thickness",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-hall.normal-min",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.mech-hall.normal-max",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.mech-hall.nominal-envelope-thickness",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.bath-east.normal-min",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 243.51,
          "observed_inches": 243.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.bath-east.normal-max",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 250.01,
          "observed_inches": 250.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.bath-east.nominal-envelope-thickness",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.normal-min",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 201.51,
          "observed_inches": 201.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.normal-max",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 206.01,
          "observed_inches": 206.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.nominal-envelope-thickness",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.bed4-hall.normal-min",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-hall.normal-max",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-hall.nominal-envelope-thickness",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-alcove.normal-min",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-alcove.normal-max",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-alcove.nominal-envelope-thickness",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-storage.normal-min",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 247.99,
          "observed_inches": 247.99,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-storage.normal-max",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 252.49,
          "observed_inches": 252.49,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-storage.nominal-envelope-thickness",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-ensuite.normal-min",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 300.40000000000003,
          "observed_inches": 300.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.bed4-ensuite.normal-max",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 304.90000000000003,
          "observed_inches": 304.9,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.bed4-ensuite.nominal-envelope-thickness",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.ensuite-wic.normal-min",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 161.99,
          "observed_inches": 161.99,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-wic.normal-max",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 168.49,
          "observed_inches": 168.49,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-wic.nominal-envelope-thickness",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-bedroom3.normal-min",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 370.90000000000003,
          "observed_inches": 370.9,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.ensuite-bedroom3.normal-max",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 377.40000000000003,
          "observed_inches": 377.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.ensuite-bedroom3.nominal-envelope-thickness",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.wing-hall.normal-min",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 251.73000000000002,
          "observed_inches": 251.73,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.wing-hall.normal-max",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 258.23,
          "observed_inches": 258.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.wing-hall.nominal-envelope-thickness",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.500000000000028,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.hall-laundry.normal-min",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 367.73,
          "observed_inches": 367.73,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.hall-laundry.normal-max",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.hall-laundry.nominal-envelope-thickness",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.laundry-north.normal-min",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 272.02500000000003,
          "observed_inches": 272.025,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-north.normal-max",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 278.52500000000003,
          "observed_inches": 278.525,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-north.nominal-envelope-thickness",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-media.normal-min",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 511.98,
          "observed_inches": 511.98,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.laundry-media.normal-max",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 518.48,
          "observed_inches": 518.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.laundry-media.nominal-envelope-thickness",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.media-rec.normal-min",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 272.02500000000003,
          "observed_inches": 272.025,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.media-rec.normal-max",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 278.52500000000003,
          "observed_inches": 278.525,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.media-rec.nominal-envelope-thickness",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.rec-hall.normal-min",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 367.73,
          "observed_inches": 367.73,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "basement.rec-hall.normal-max",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "basement.rec-hall.nominal-envelope-thickness",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "main.bath-hall-nov03.normal-min",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 181.35,
          "observed_inches": 181.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "main.bath-hall-nov03.normal-max",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 185.85,
          "observed_inches": 185.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "main.bath-hall-nov03.nominal-envelope-thickness",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "basement.media-B1-lining.normal-min",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 707.605,
          "observed_inches": 707.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.media-B1-lining.normal-max",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.media-B1-lining.nominal-envelope-thickness",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.rec-B1-lining.normal-min",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 707.605,
          "observed_inches": 707.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.rec-B1-lining.normal-max",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.rec-B1-lining.nominal-envelope-thickness",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.media-south-B1-lining.normal-min",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 149.40000000000003,
          "observed_inches": 149.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.media-south-B1-lining.normal-max",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 151.40000000000003,
          "observed_inches": 151.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.media-south-B1-lining.nominal-envelope-thickness",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.wing-east-B1-lining.normal-min",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.wing-east-B1-lining.normal-max",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 40.48000000000002,
          "observed_inches": 40.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.wing-east-B1-lining.nominal-envelope-thickness",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.mech-south-B1-lining.normal-min",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.4,
          "observed_inches": 38.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.mech-south-B1-lining.normal-max",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 40.4,
          "observed_inches": 40.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.mech-south-B1-lining.nominal-envelope-thickness",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.normal-min",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.normal-max",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 42.48000000000002,
          "observed_inches": 42.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.nominal-envelope-thickness",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.0,
          "observed_inches": 4.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bath-south-finish-lining.normal-min",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 125.42499999999997,
          "observed_inches": 125.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-south-finish-lining.normal-max",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 129.42499999999998,
          "observed_inches": 129.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-south-finish-lining.nominal-envelope-thickness",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.000000000000014,
          "observed_inches": 4.000000000000014,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-laundry-return.normal-min",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 376.355,
          "observed_inches": 376.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "basement.bath-laundry-return.normal-max",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 382.855,
          "observed_inches": 382.855,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "basement.bath-laundry-return.nominal-envelope-thickness",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "main.registered-west-E1.normal-min",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 716.48,
          "observed_inches": 716.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-west-E1.normal-max",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 724.355,
          "observed_inches": 724.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-west-E1.nominal-envelope-thickness",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-kitchen-south-E1.normal-min",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 134.925,
          "observed_inches": 134.925,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-kitchen-south-E1.normal-max",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 142.8,
          "observed_inches": 142.8,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-kitchen-south-E1.nominal-envelope-thickness",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-lake-E1.normal-min",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 500.87999999999994,
          "observed_inches": 500.88,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.registered-lake-E1.normal-max",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 508.75499999999994,
          "observed_inches": 508.755,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.registered-lake-E1.nominal-envelope-thickness",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.primary-WC-west.normal-min",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 138.85,
          "observed_inches": 138.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-west.normal-max",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 143.35,
          "observed_inches": 143.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-west.nominal-envelope-thickness",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.normal-min",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 260.84999999999997,
          "observed_inches": 260.85,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.normal-max",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 265.34999999999997,
          "observed_inches": 265.35,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.nominal-envelope-thickness",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        }
      ],
      "frames": [
        {
          "tag": "W100",
          "room": "bedroom2",
          "observed_inches": {
            "width": 25.0,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W101",
          "room": "bedroom2",
          "observed_inches": {
            "width": 99.00000000000001,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 99,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W102",
          "room": "bedroom2",
          "observed_inches": {
            "width": 99.00000000000001,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 99,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W103",
          "room": "primary-bathroom",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W104",
          "room": "primary-bathroom",
          "observed_inches": {
            "width": 72.00000000000003,
            "high-height": 96.0,
            "physical-depth": 5.625
          },
          "expected_programme_inches": {
            "width": 72,
            "high-height": 96,
            "physical-depth": 5.625
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W105",
          "room": "bedroom1",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W106",
          "room": "bedroom1",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W110",
          "room": "boot-room",
          "observed_inches": {
            "width": 25.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W111",
          "room": "powder-room",
          "observed_inches": {
            "width": 25.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W001",
          "room": "bedroom4",
          "observed_inches": {
            "width": 60.00000000000003,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W002",
          "room": "ensuite3",
          "observed_inches": {
            "width": 25.0,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W003",
          "room": "bedroom3",
          "observed_inches": {
            "width": 138.9375,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 138.9375,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W004",
          "room": "rec-room",
          "observed_inches": {
            "width": 145.125,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.125,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W005",
          "room": "rec-room",
          "observed_inches": {
            "width": 145.125,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.125,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W006",
          "room": "rec-room",
          "observed_inches": {
            "width": 27.0,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E002",
          "room": "lower-entry",
          "observed_inches": {
            "width": 70.625,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "expected_programme_inches": {
            "width": 70.625,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E004",
          "room": "rec-room",
          "observed_inches": {
            "width": 38.0,
            "high-height": 95.5,
            "physical-depth": 6.625
          },
          "expected_programme_inches": {
            "width": 38,
            "high-height": 95.5,
            "physical-depth": 6.625
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E100",
          "room": "bedroom1",
          "observed_inches": {
            "width": 139.1875,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "expected_programme_inches": {
            "width": 139.1875,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W112",
          "room": "kitchen",
          "observed_inches": {
            "width": 144.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 144,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW100",
          "room": "bedroom1",
          "observed_inches": {
            "width": 47.3125,
            "high-height": 24.25,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 47.3125,
            "high-height": 24.25,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW101",
          "room": "bedroom1",
          "observed_inches": {
            "width": 44.5625,
            "high-height": 27.9375,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 44.5625,
            "high-height": 27.9375,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW102",
          "room": "bedroom1",
          "observed_inches": {
            "width": 47.3125,
            "high-height": 31.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 47.3125,
            "high-height": 31.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W109",
          "room": "greatroom",
          "observed_inches": {
            "width": 27.0,
            "high-height": 72.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 72,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW106",
          "room": "greatroom",
          "observed_inches": {
            "width": 60.0,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW107",
          "room": "greatroom",
          "observed_inches": {
            "width": 60.0,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW105",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW104",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 25.125,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 25.125,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW103",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 21.375,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 21.375,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-west-lower",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 95.98425,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047247,
            "high-height": 95.98425196850394,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-west-upper",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 68.97637999999998,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047247,
            "high-height": 68.97637795275591,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-east-lower",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 95.98425,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047242,
            "high-height": 95.98425196850394,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-east-upper",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 54.84252000000001,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047242,
            "high-height": 54.84251968503935,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W007",
          "room": "rec-room",
          "observed_inches": {
            "width": 24.0,
            "high-height": 72.0,
            "physical-depth": 5.439999999999998
          },
          "expected_programme_inches": {
            "width": 24,
            "high-height": 72,
            "physical-depth": 5.44
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Primary baseline nominal opening, Nov11addition confirmed; actual updated supplier frame/profile unresolved",
          "status": "pass"
        },
        {
          "tag": "W108",
          "room": "greatroom",
          "observed_inches": {
            "width": 27.0,
            "high-height": 72.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 72,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Quoted nominal27x72casement /4.5in frame; centre from primaryA102jambs, mounting depth retained as explicit study registration",
          "status": "pass"
        },
        {
          "tag": "EST-B3-WOODS-01",
          "room": "bedroom3",
          "observed_inches": {
            "width": 25.0,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "owner-authorized estimated design position / matching proposed family size",
          "status": "pass"
        }
      ],
      "critical_openings": [
        {
          "id": "rec-room.E004.ICF-width",
          "expected_inches": 44,
          "observed_inches": 44.0,
          "actual_slice": {
            "width_inches": 44.0,
            "bounds": [
              281.8,
              50.0,
              325.8,
              50.0
            ],
            "normal_planes": [
              709.605,
              722.855,
              722.88992
            ]
          },
          "status": "pass"
        },
        {
          "id": "rec-room.E004.framed-width",
          "expected_inches": 39,
          "observed_inches": 39.0,
          "status": "pass"
        },
        {
          "id": "greatroom.E101.rough-width",
          "expected_inches": 131.75,
          "observed_inches": 131.75,
          "actual_slice": {
            "width_inches": 131.75,
            "bounds": [
              284.57,
              200.0,
              416.32,
              200.0
            ],
            "normal_planes": [
              716.48,
              724.355
            ]
          },
          "status": "pass"
        }
      ],
      "face_integrity": {
        "unique_face_ids": true,
        "face_count": 68132,
        "invalid_or_zero_faces": []
      },
      "whole_model_qualified": false,
      "image_generation_allowed": false,
      "owner_approval": null
    },
    {
      "mode": "espresso-operating",
      "model_sha256": "d920df685aad1a33557f45e62683c2b5bda9f83d1bd287d92683e86f6944a207",
      "source_plan_sha256_matches": true,
      "canonical_arrays_match": true,
      "walls": [
        {
          "id": "main.bed-east.normal-min",
          "wall": "bed-east",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 23.974999999999984,
          "observed_inches": 23.975,
          "delta_inches": 1.7763568394002505e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-east.normal-max",
          "wall": "bed-east",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 31.849999999999984,
          "observed_inches": 31.85,
          "delta_inches": 1.7763568394002505e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-east.nominal-envelope-thickness",
          "wall": "bed-east",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.6704,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "31.85": [
              "house-face-150::W102-0"
            ],
            "23.975": [
              "house-face-152::W102-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.normal-min",
          "wall": "bed-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 23.975000000000005,
          "observed_inches": 23.975,
          "delta_inches": -3.552713678800501e-15,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.normal-max",
          "wall": "bed-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 31.850000000000005,
          "observed_inches": 31.85,
          "delta_inches": -3.552713678800501e-15,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-south.nominal-envelope-thickness",
          "wall": "bed-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.537499999999994,
            "height_inches": 240,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.687499999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            23.975,
            31.85
          ],
          "actual_face_ids_by_plane": {
            "23.975": [
              "house-face-317::W101-0"
            ],
            "31.85": [
              "house-face-319::W101-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.normal-min",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 251.725,
          "observed_inches": 251.725,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.normal-max",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 259.6000000000001,
          "observed_inches": 259.6,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-west.nominal-envelope-thickness",
          "wall": "bed2-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875000000000085,
          "observed_inches": 7.875000000000028,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 33.4585,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 25.871700000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            259.6
          ],
          "actual_face_ids_by_plane": {
            "259.6": [
              "house-face-342"
            ],
            "251.725": [
              "house-face-344"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.normal-min",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 187.85,
          "observed_inches": 187.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.normal-max",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 194.35,
          "observed_inches": 194.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed2-south-partition.nominal-envelope-thickness",
          "wall": "bed2-south-partition",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            187.85,
            194.35
          ],
          "actual_face_ids_by_plane": {
            "187.85": [
              "house-face-348"
            ],
            "194.35": [
              "bathroom-r28::nov03-1"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.normal-min",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 332.46999999999997,
          "observed_inches": 332.35,
          "delta_inches": -0.1199999999999477,
          "status": "fail",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.normal-max",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 338.96999999999997,
          "observed_inches": 338.97,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed1-south-partition.nominal-envelope-thickness",
          "wall": "bed1-south-partition",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.6200000000000045,
          "delta_inches": 0.12000000000000455,
          "status": "fail",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 47.39999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.659999999999986,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            332.35,
            332.47,
            338.97
          ],
          "actual_face_ids_by_plane": {
            "332.47": [
              "house-face-367"
            ],
            "338.97": [
              "house-face-369"
            ],
            "332.35": [
              "bathroom-r28::nov03-2"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.normal-min",
          "wall": "bed-north",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 500.86999999999995,
          "observed_inches": 500.87,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.normal-max",
          "wall": "bed-north",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 508.74499999999995,
          "observed_inches": 508.745,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.bed-north.nominal-envelope-thickness",
          "wall": "bed-north",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 46.848,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 28.5696,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            500.87,
            508.745
          ],
          "actual_face_ids_by_plane": {
            "500.87": [
              "house-face-533::E100-0"
            ],
            "508.745": [
              "house-face-535::E100-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.normal-min",
          "wall": "hall-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 251.725,
          "observed_inches": 251.725,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.normal-max",
          "wall": "hall-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 258.2250000000001,
          "observed_inches": 258.225,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.hall-west.nominal-envelope-thickness",
          "wall": "hall-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.500000000000085,
          "observed_inches": 6.500000000000028,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 145.52949999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 117.8539,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.725,
            258.225
          ],
          "actual_face_ids_by_plane": {
            "258.225": [
              "house-face-607"
            ],
            "251.725": [
              "house-face-609"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.normal-min",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 110.935,
          "observed_inches": 110.935,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.normal-max",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 118.81,
          "observed_inches": 118.81,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot-south.nominal-envelope-thickness",
          "wall": "powder-boot-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 266.017,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.6754,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-west",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            110.935,
            118.81
          ],
          "actual_face_ids_by_plane": {
            "110.935": [
              "house-face-691::W111-0"
            ],
            "118.81": [
              "house-face-693::W111-0"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.normal-min",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 319.51,
          "observed_inches": 319.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.normal-max",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 326.01,
          "observed_inches": 326.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-boot.nominal-envelope-thickness",
          "wall": "powder-boot",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 119.2825,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 112.6045,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            319.51,
            326.01
          ],
          "actual_face_ids_by_plane": {
            "326.01": [
              "house-face-728"
            ],
            "319.51": [
              "house-face-730"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.normal-min",
          "wall": "powder-north",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 189.91,
          "observed_inches": 189.91,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.normal-max",
          "wall": "powder-north",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 194.41,
          "observed_inches": 194.41,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.powder-north.nominal-envelope-thickness",
          "wall": "powder-north",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 259.1535,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 253.2107,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "bed2-south-partition",
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            189.91,
            194.41
          ],
          "actual_face_ids_by_plane": {
            "189.91": [
              "house-face-734"
            ],
            "194.41": [
              "house-face-736"
            ]
          },
          "source_basis": "Typed full finished-assembly envelope from source-plan-v2; original core trace retained separately. Source-class/assignment and whole-space QA remain held."
        },
        {
          "id": "main.entry-south.normal-min",
          "wall": "entry-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 162.975,
          "observed_inches": 162.975,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-south.normal-max",
          "wall": "entry-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 170.85,
          "observed_inches": 170.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-south.nominal-envelope-thickness",
          "wall": "entry-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 398.16949999999997,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 388.22189999999995,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "entry-porch-east"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            162.975,
            170.85
          ],
          "actual_face_ids_by_plane": {
            "162.975": [
              "house-face-765"
            ],
            "170.85": [
              "house-face-767"
            ]
          },
          "source_basis": "Close the E1front entry corner at the actual kitchen-return finish X1058.88. Do not carry the prior wrong outward-side envelope across the kitchen cabinetry."
        },
        {
          "id": "main.entry-porch-east.normal-min",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 387.01,
          "observed_inches": 387.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-east.normal-max",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 396.135,
          "observed_inches": 396.135,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-east.nominal-envelope-thickness",
          "wall": "entry-porch-east",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 9.125,
          "observed_inches": 9.125,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 125.45249999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 111.53059999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              },
              {
                "along_inches": 116.37299999999999,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "powder-boot-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            387.01,
            396.135
          ],
          "actual_face_ids_by_plane": {
            "396.135": [
              "house-face-784"
            ],
            "387.01": [
              "house-face-786"
            ]
          },
          "source_basis": "A102 printed boot61in clear and9.125in E5masonry assembly, primary E5leader; outside is positiveX."
        },
        {
          "id": "main.entry-porch-west.normal-min",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 502.2050000000001,
          "observed_inches": 502.205,
          "delta_inches": -1.1368683772161603e-13,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.entry-porch-west.normal-max",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 510.0800000000001,
          "observed_inches": 510.08,
          "delta_inches": -1.1368683772161603e-13,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.entry-porch-west.nominal-envelope-thickness",
          "wall": "entry-porch-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 111.53059999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            502.205,
            510.08
          ],
          "actual_face_ids_by_plane": {
            "510.08": [
              "house-face-790"
            ],
            "502.205": [
              "house-face-792"
            ]
          },
          "source_basis": "A102 actual kitchen-side finished face X1058.88 (path8888). Exterior/porch is negativeX, not positiveX. Retain source core; nominal E1assembly7.875in extends outward. Printed schedule governs nominal width; primary cladding graphic differs about0.285in."
        },
        {
          "id": "main.nook-south.normal-min",
          "wall": "nook-south",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 456.32,
          "observed_inches": 456.32,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-south.normal-max",
          "wall": "nook-south",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 462.32,
          "observed_inches": 462.355,
          "delta_inches": 0.03500000000002501,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-south.nominal-envelope-thickness",
          "wall": "nook-south",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.0,
          "observed_inches": 6.035000000000025,
          "delta_inches": 0.03500000000002501,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 264.672,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.91840000000002,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "hall-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.32,
            462.32,
            462.355
          ],
          "actual_face_ids_by_plane": {
            "456.32": [
              "nook-r6-small-none-2"
            ],
            "462.32": [
              "nook-r6-small-none-4"
            ],
            "462.355": [
              "nook-r6-small-none-24"
            ]
          },
          "source_basis": "A102 finish faces"
        },
        {
          "id": "main.nook-west.normal-min",
          "wall": "nook-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 368.40000000000003,
          "observed_inches": 368.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "main.nook-west.normal-max",
          "wall": "nook-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 374.40000000000003,
          "observed_inches": 374.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "main.nook-west.nominal-envelope-thickness",
          "wall": "nook-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.0,
          "observed_inches": 6.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 467.64,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 457.29920000000004,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              },
              {
                "along_inches": 460.896,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "nook-south"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            368.4,
            374.4
          ],
          "actual_face_ids_by_plane": {
            "374.4": [
              "nook-r6-small-none-31"
            ],
            "368.4": [
              "nook-r6-small-none-33"
            ]
          },
          "source_basis": "Retained R9authoring programme return-south/north geometry from prepare_r2.py; inferred closure bounds, not a new architect/engineer dimension. Original source reading region is preserved separately."
        },
        {
          "id": "basement.foundation-east.normal-min",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 25.230000000000018,
          "observed_inches": 25.19487,
          "delta_inches": -0.03513000000001654,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-east.normal-max",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-east.nominal-envelope-thickness",
          "wall": "foundation-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.285129999999995,
          "delta_inches": 0.03512999999999522,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 34.66,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.19487,
            25.23,
            38.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "house-face-856::W001-0"
            ],
            "25.23": [
              "house-face-858::W001-0"
            ],
            "25.19487": [
              "facade-r8-47::W001-0"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.normal-min",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 25.149999999999995,
          "observed_inches": 25.11508,
          "delta_inches": -0.034919999999996065,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.normal-max",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 38.4,
          "observed_inches": 38.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-south.nominal-envelope-thickness",
          "wall": "foundation-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.250000000000004,
          "observed_inches": 13.28492,
          "delta_inches": 0.034919999999996065,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.87750000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            25.11508,
            25.15,
            38.4
          ],
          "actual_face_ids_by_plane": {
            "25.15": [
              "house-face-897"
            ],
            "38.4": [
              "house-face-899"
            ],
            "25.11508": [
              "facade-r8-54"
            ]
          },
          "source_basis": "A101 printed13.25in with registered inside finish anchor"
        },
        {
          "id": "basement.foundation-mech-west.normal-min",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 243.35500000000002,
          "observed_inches": 243.355,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-mech-west.normal-max",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 258.355,
          "observed_inches": 258.39453,
          "delta_inches": 0.039529999999956544,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-mech-west.nominal-envelope-thickness",
          "wall": "foundation-mech-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 15.0,
          "observed_inches": 15.039529999999985,
          "delta_inches": 0.039529999999984966,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 39.928,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.355,
            258.355,
            258.39453
          ],
          "actual_face_ids_by_plane": {
            "258.355": [
              "house-face-904"
            ],
            "243.355": [
              "house-face-906"
            ],
            "258.39453": [
              "facade-r8-55"
            ]
          },
          "source_basis": "A10115in combined finish chain; underlying F2/B1 layer fit needs structural reconciliation"
        },
        {
          "id": "basement.foundation-bath-south.normal-min",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 112.17499999999997,
          "observed_inches": 112.14008,
          "delta_inches": -0.034919999999971196,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-bath-south.normal-max",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 125.42499999999997,
          "observed_inches": 125.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-bath-south.nominal-envelope-thickness",
          "wall": "foundation-bath-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.28492,
          "delta_inches": 0.03491999999999962,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 260.9728,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            112.14008,
            112.175,
            125.425
          ],
          "actual_face_ids_by_plane": {
            "112.175": [
              "house-face-909"
            ],
            "125.425": [
              "house-face-911"
            ],
            "112.14008": [
              "facade-r8-56"
            ]
          },
          "source_basis": "Primary white ICF footprint/continuity and F2schedule13.25in; do not run foundation objects through an interior-wall default."
        },
        {
          "id": "basement.foundation-entry-east.normal-min",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 376.355,
          "observed_inches": 376.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-east.normal-max",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 393.605,
          "observed_inches": 393.65046,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-east.nominal-envelope-thickness",
          "wall": "foundation-entry-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 17.25,
          "observed_inches": 17.29545999999999,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.41439999999999,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            393.605,
            393.65046
          ],
          "actual_face_ids_by_plane": {
            "393.605": [
              "house-face-916"
            ],
            "376.355": [
              "house-face-918"
            ],
            "393.65046": [
              "facade-r8-57"
            ]
          },
          "source_basis": "A10117.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-north.normal-min",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 164.15000000000003,
          "observed_inches": 164.15,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-north.normal-max",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 181.4,
          "observed_inches": 181.44546,
          "delta_inches": 0.045459999999991396,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-north.nominal-envelope-thickness",
          "wall": "foundation-entry-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 17.24999999999997,
          "observed_inches": 17.29545999999999,
          "delta_inches": 0.04546000000001982,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 395.85290000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            164.15,
            181.4,
            181.44546
          ],
          "actual_face_ids_by_plane": {
            "164.15": [
              "house-face-921"
            ],
            "181.4": [
              "house-face-923"
            ],
            "181.44546": [
              "facade-r8-58"
            ]
          },
          "source_basis": "A101 paired F2/B2leaders plus90.625in laundry chain; actual lining/wall spans remain separately typed."
        },
        {
          "id": "basement.foundation-entry-west.normal-min",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 503.23,
          "observed_inches": 503.18956,
          "delta_inches": -0.04044000000004644,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-west.normal-max",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 518.48,
          "observed_inches": 518.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-entry-west.nominal-envelope-thickness",
          "wall": "foundation-entry-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 15.25,
          "observed_inches": 15.290440000000046,
          "delta_inches": 0.04044000000004644,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 105.36159999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            503.18956,
            503.23,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-928"
            ],
            "503.23": [
              "house-face-930"
            ],
            "503.18956": [
              "facade-r8-59"
            ]
          },
          "source_basis": "A10115.25in combined finish chain"
        },
        {
          "id": "basement.foundation-media-south.normal-min",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 136.15000000000003,
          "observed_inches": 136.11487,
          "delta_inches": -0.03513000000003785,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-media-south.normal-max",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 149.40000000000003,
          "observed_inches": 149.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-media-south.nominal-envelope-thickness",
          "wall": "foundation-media-south",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.28513000000001,
          "delta_inches": 0.03513000000000943,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 525.1925,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 507.6225,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "foundation-entry-west"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            136.11487,
            136.15,
            149.4
          ],
          "actual_face_ids_by_plane": {
            "136.15": [
              "house-face-933"
            ],
            "149.4": [
              "house-face-935"
            ],
            "136.11487": [
              "facade-r8-60"
            ]
          },
          "source_basis": "A101 closed31ft0.375in overall plus122.625/6.5/222.125/7.875in chain"
        },
        {
          "id": "basement.foundation-west.normal-min",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.foundation-west.normal-max",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 722.855,
          "observed_inches": 722.88992,
          "delta_inches": 0.034919999999942775,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.foundation-west.nominal-envelope-thickness",
          "wall": "foundation-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 13.25,
          "observed_inches": 13.284919999999943,
          "delta_inches": 0.034919999999942775,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 156.58250000000004,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            709.605,
            722.855,
            722.88992
          ],
          "actual_face_ids_by_plane": {
            "722.855": [
              "house-face-1001::E004-0::E004-ICF44-0"
            ],
            "709.605": [
              "house-face-1003::E004-0::E004-ICF44-0"
            ],
            "722.88992": [
              "facade-r8-61::E004-0::E004-ICF44-0"
            ]
          },
          "source_basis": "A101 north finish chain13.25in; separate media lining supplies its printed finish offset"
        },
        {
          "id": "basement.bedroom3-north.normal-min",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 500.65000000000003,
          "observed_inches": 500.65,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.bedroom3-north.normal-max",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 508.52500000000003,
          "observed_inches": 508.57493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.bedroom3-north.nominal-envelope-thickness",
          "wall": "bedroom3-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924930000000018,
          "delta_inches": 0.04993000000001757,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 29.917500000000018,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1078::W003-0"
            ],
            "508.525": [
              "house-face-1080::W003-0"
            ],
            "508.57493": [
              "facade-r8-67::W003-0"
            ]
          },
          "source_basis": "A101 north7.875in finish and complete west depth chain"
        },
        {
          "id": "basement.rec-north.normal-min",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 500.65000000000003,
          "observed_inches": 500.65,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.rec-north.normal-max",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 508.52500000000003,
          "observed_inches": 508.57493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.rec-north.nominal-envelope-thickness",
          "wall": "rec-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924930000000018,
          "delta_inches": 0.04993000000001757,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 373.485,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.65,
            508.525,
            508.57493
          ],
          "actual_face_ids_by_plane": {
            "500.65": [
              "house-face-1186::W004-0"
            ],
            "508.525": [
              "house-face-1188::W004-0"
            ],
            "508.57493": [
              "facade-r8-71::W004-0"
            ]
          },
          "source_basis": "A101 common north7.875in finish and complete east depth chain"
        },
        {
          "id": "basement.walkout-north.normal-min",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 456.0,
          "observed_inches": 456.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-north.normal-max",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 463.875,
          "observed_inches": 463.92567,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-north.nominal-envelope-thickness",
          "wall": "walkout-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.925670000000025,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 263.98,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 254.18,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-east",
                  "wing-hall"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            456.0,
            463.875,
            463.92567
          ],
          "actual_face_ids_by_plane": {
            "456.0": [
              "house-face-1259::E002-0"
            ],
            "463.875": [
              "house-face-1261::E002-0"
            ],
            "463.92567": [
              "facade-r8-78::E002-0"
            ]
          },
          "source_basis": "A101 E1leader on continuous framed walkout enclosure and printed4ft interior landing station903.84."
        },
        {
          "id": "basement.walkout-east.normal-min",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 251.73000000000002,
          "observed_inches": 251.73,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-east.normal-max",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 259.605,
          "observed_inches": 259.65493,
          "delta_inches": 0.04992999999996073,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-east.nominal-envelope-thickness",
          "wall": "walkout-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.924929999999989,
          "delta_inches": 0.04992999999998915,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            251.73,
            259.605,
            259.65493
          ],
          "actual_face_ids_by_plane": {
            "259.605": [
              "house-face-1278"
            ],
            "251.73": [
              "house-face-1280"
            ],
            "259.65493": [
              "facade-r8-81"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.normal-min",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 366.355,
          "observed_inches": 366.30433,
          "delta_inches": -0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.normal-max",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.walkout-west.nominal-envelope-thickness",
          "wall": "walkout-west",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.925670000000025,
          "delta_inches": 0.050670000000025084,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 466.153,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": [
              {
                "along_inches": 463.0866,
                "reason": "The nominal finish probe is buried inside a different source-defined wall at a closed junction; this is not an exposed face.",
                "source_intersecting_walls": [
                  "walkout-north"
                ]
              }
            ]
          },
          "actual_planes_inches": [
            366.30433,
            366.355,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1314"
            ],
            "366.355": [
              "house-face-1316"
            ],
            "366.30433": [
              "facade-r8-82"
            ]
          },
          "source_basis": "A101 north7.875in exterior finish chain"
        },
        {
          "id": "basement.mech-bed4.normal-min",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 151.775,
          "observed_inches": 151.775,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-bed4.normal-max",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 158.275,
          "observed_inches": 158.275,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-bed4.nominal-envelope-thickness",
          "wall": "mech-bed4",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 41.667400000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            151.775,
            158.275
          ],
          "actual_face_ids_by_plane": {
            "151.775": [
              "house-face-1337"
            ],
            "158.275": [
              "house-face-1339"
            ]
          },
          "source_basis": "A101 printed mechanical113.375in clear and6.5in partition"
        },
        {
          "id": "basement.mech-hall.normal-min",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.mech-hall.normal-max",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.mech-hall.nominal-envelope-thickness",
          "wall": "mech-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 159.2199,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1344"
            ],
            "193.35": [
              "house-face-1346"
            ]
          },
          "source_basis": "A101 I2label arrow at[587.16,508.08] points to this wall."
        },
        {
          "id": "basement.bath-east.normal-min",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 243.51,
          "observed_inches": 243.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.bath-east.normal-max",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 250.01,
          "observed_inches": 250.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.bath-east.nominal-envelope-thickness",
          "wall": "bath-east",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 126.9712,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            243.51,
            250.01
          ],
          "actual_face_ids_by_plane": {
            "250.01": [
              "house-face-1351"
            ],
            "243.51": [
              "house-face-1353"
            ]
          },
          "source_basis": "A101 I1label arrow at[663.84,453.72] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.normal-min",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 201.51,
          "observed_inches": 201.51,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.normal-max",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 206.01,
          "observed_inches": 206.01,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.hall-bath-north.nominal-envelope-thickness",
          "wall": "hall-bath-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 201.0624,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            201.51,
            206.01
          ],
          "actual_face_ids_by_plane": {
            "201.51": [
              "house-face-1369"
            ],
            "206.01": [
              "house-face-1371"
            ]
          },
          "source_basis": "A101 I2.1label arrow at[826.92,525.48] points to this wall."
        },
        {
          "id": "basement.bed4-hall.normal-min",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-hall.normal-max",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-hall.nominal-envelope-thickness",
          "wall": "bed4-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 206.37919999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1395"
            ],
            "193.35": [
              "house-face-1397"
            ]
          },
          "source_basis": "Continuous collinear return of source I2mech/hall wall, including I002jamb."
        },
        {
          "id": "basement.bed4-alcove.normal-min",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 193.35,
          "observed_inches": 193.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-alcove.normal-max",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 197.85,
          "observed_inches": 197.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-alcove.nominal-envelope-thickness",
          "wall": "bed4-alcove",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 253.43839999999994,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            193.35,
            197.85
          ],
          "actual_face_ids_by_plane": {
            "197.85": [
              "house-face-1408"
            ],
            "193.35": [
              "house-face-1410"
            ]
          },
          "source_basis": "Primary continuous I2side wall. Earlier581.52left trace has no primary wall-edge witness; use same source core as the adjoining584.52..589.8wall, with half-inch finishes."
        },
        {
          "id": "basement.bed4-storage.normal-min",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 247.99,
          "observed_inches": 247.99,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-storage.normal-max",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 252.49,
          "observed_inches": 252.49,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-storage.nominal-envelope-thickness",
          "wall": "bed4-storage",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 198.4474,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            247.99,
            252.49
          ],
          "actual_face_ids_by_plane": {
            "247.99": [
              "house-face-1425"
            ],
            "252.49": [
              "house-face-1427"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.bed4-ensuite.normal-min",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 300.40000000000003,
          "observed_inches": 300.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.bed4-ensuite.normal-max",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 304.90000000000003,
          "observed_inches": 304.9,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.bed4-ensuite.nominal-envelope-thickness",
          "wall": "bed4-ensuite",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            300.4,
            304.9
          ],
          "actual_face_ids_by_plane": {
            "300.4": [
              "house-face-1431"
            ],
            "304.9": [
              "house-face-1433"
            ]
          },
          "source_basis": "A101 printed Bedroom4142.125in clear,4.5in partition and Ensuite366in clear"
        },
        {
          "id": "basement.ensuite-wic.normal-min",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 161.99,
          "observed_inches": 161.99,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-wic.normal-max",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 168.49,
          "observed_inches": 168.49,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-wic.nominal-envelope-thickness",
          "wall": "ensuite-wic",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 306.22,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            161.99,
            168.49
          ],
          "actual_face_ids_by_plane": {
            "168.49": [
              "house-face-1438"
            ],
            "161.99": [
              "house-face-1440"
            ]
          },
          "source_basis": "Nominal I1/I2 width and source-vector core centre; particular type/finish assignment remains provisional."
        },
        {
          "id": "basement.ensuite-bedroom3.normal-min",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 370.90000000000003,
          "observed_inches": 370.9,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.ensuite-bedroom3.normal-max",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 377.40000000000003,
          "observed_inches": 377.4,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.ensuite-bedroom3.nominal-envelope-thickness",
          "wall": "ensuite-bedroom3",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.74500000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            370.9,
            377.4
          ],
          "actual_face_ids_by_plane": {
            "370.9": [
              "furnished-r15--I006-source-door-26"
            ],
            "377.4": [
              "furnished-r15--I006-source-door-28"
            ]
          },
          "source_basis": "A101 printed Ensuite366in clear,6.5in partition and Bedroom3123.25in clear"
        },
        {
          "id": "basement.wing-hall.normal-min",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 251.73000000000002,
          "observed_inches": 251.73,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.wing-hall.normal-max",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 258.23,
          "observed_inches": 258.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.wing-hall.nominal-envelope-thickness",
          "wall": "wing-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.500000000000028,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 210.54719999999998,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            251.73,
            258.23
          ],
          "actual_face_ids_by_plane": {
            "258.23": [
              "house-face-1473"
            ],
            "251.73": [
              "house-face-1475"
            ]
          },
          "source_basis": "A101 Bedroom3213.25in clear, nominal interior6.5in partition"
        },
        {
          "id": "basement.hall-laundry.normal-min",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 367.73,
          "observed_inches": 367.73,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.hall-laundry.normal-max",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.hall-laundry.nominal-envelope-thickness",
          "wall": "hall-laundry",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 207.4603,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1521"
            ],
            "367.73": [
              "house-face-1523"
            ]
          },
          "source_basis": "Shared actual rec-side source station; opposite face uses nominal6.5in assembly"
        },
        {
          "id": "basement.laundry-north.normal-min",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 272.02500000000003,
          "observed_inches": 272.025,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-north.normal-max",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 278.52500000000003,
          "observed_inches": 278.525,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-north.nominal-envelope-thickness",
          "wall": "laundry-north",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 377.00780000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1528"
            ],
            "278.525": [
              "house-face-1530"
            ]
          },
          "source_basis": "Unbroken horizontal partition with source I1leader at[1075.56,633]; same finish planes as media/rec wall."
        },
        {
          "id": "basement.laundry-media.normal-min",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 511.98,
          "observed_inches": 511.98,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.laundry-media.normal-max",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 518.48,
          "observed_inches": 518.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.laundry-media.nominal-envelope-thickness",
          "wall": "laundry-media",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 179.41009999999997,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            511.98,
            518.48
          ],
          "actual_face_ids_by_plane": {
            "518.48": [
              "house-face-1553"
            ],
            "511.98": [
              "house-face-1555"
            ]
          },
          "source_basis": "A101 printed media189.125in clear; opposite face uses nominal6.5in source assembly"
        },
        {
          "id": "basement.media-rec.normal-min",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 272.02500000000003,
          "observed_inches": 272.025,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.media-rec.normal-max",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 278.52500000000003,
          "observed_inches": 278.525,
          "delta_inches": -5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.media-rec.nominal-envelope-thickness",
          "wall": "media-rec",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.3025,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            272.025,
            278.525
          ],
          "actual_face_ids_by_plane": {
            "272.025": [
              "house-face-1559"
            ],
            "278.525": [
              "house-face-1561"
            ]
          },
          "source_basis": "A101 printed media122.625in clear,6.5in partition and rec222.125in clear"
        },
        {
          "id": "basement.rec-hall.normal-min",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 367.73,
          "observed_inches": 367.73,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "basement.rec-hall.normal-max",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 374.23,
          "observed_inches": 374.23,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "basement.rec-hall.nominal-envelope-thickness",
          "wall": "rec-hall",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.07450000000006,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            367.73,
            374.23
          ],
          "actual_face_ids_by_plane": {
            "374.23": [
              "house-face-1579"
            ],
            "367.73": [
              "house-face-1581"
            ]
          },
          "source_basis": "A101 printed rec335.375in clear; opposite face uses nominal6.5in source assembly; A101 actual E1walkout-north closure startsY903.84. Interior I1rec-hall ends here, not beyond the exterior W007recess. Remove duplicated opaque wall acrossW007; retain separately cut exterior walkout-west."
        },
        {
          "id": "main.bath-hall-nov03.normal-min",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 181.35,
          "observed_inches": 181.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "main.bath-hall-nov03.normal-max",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 185.85,
          "observed_inches": 185.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "main.bath-hall-nov03.nominal-envelope-thickness",
          "wall": "bath-hall-nov03",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 197.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            181.35,
            185.85
          ],
          "actual_face_ids_by_plane": {
            "181.35": [
              "bathroom-r28::nov03-3172",
              "bathroom-r28::nov03-3179"
            ],
            "185.85": [
              "bathroom-r28::nov03-3177"
            ]
          },
          "source_basis": "November3 I104printed149.5x138in room,4.5in hall partition, registered to current finished origin[31.85,194.35] without scaling."
        },
        {
          "id": "basement.media-B1-lining.normal-min",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 707.605,
          "observed_inches": 707.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.media-B1-lining.normal-max",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.media-B1-lining.nominal-envelope-thickness",
          "wall": "media-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 151.85250000000002,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-0"
            ],
            "709.605": [
              "r26-room-v3-1"
            ]
          },
          "source_basis": "A10115.25in combined west thickness minus13.25in F2=2in B1; media189.125in clear width"
        },
        {
          "id": "basement.rec-B1-lining.normal-min",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 707.605,
          "observed_inches": 707.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.rec-B1-lining.normal-max",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 709.605,
          "observed_inches": 709.605,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.rec-B1-lining.nominal-envelope-thickness",
          "wall": "rec-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 282.96750000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            707.605,
            709.605
          ],
          "actual_face_ids_by_plane": {
            "707.605": [
              "r26-room-v3-7"
            ],
            "709.605": [
              "r26-room-v3-19"
            ]
          },
          "source_basis": "A101 paired west F2/B1leaders. Printed335.375in reaches the F2face; subtract the separate nominal2in B1lining for333.375in occupied clear width."
        },
        {
          "id": "basement.media-south-B1-lining.normal-min",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 149.40000000000003,
          "observed_inches": 149.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.media-south-B1-lining.normal-max",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 151.40000000000003,
          "observed_inches": 151.4,
          "delta_inches": -2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.media-south-B1-lining.nominal-envelope-thickness",
          "wall": "media-south-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 522.2625,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            149.4,
            151.4
          ],
          "actual_face_ids_by_plane": {
            "149.4": [
              "r26-room-v3-42"
            ],
            "151.4": [
              "r26-room-v3-43"
            ]
          },
          "source_basis": "A101 paired F2/B1leaders above media. Printed122.625in starts at the F2face; source B1nominal2in gives120.625in occupied clear depth."
        },
        {
          "id": "basement.wing-east-B1-lining.normal-min",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.wing-east-B1-lining.normal-max",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 40.48000000000002,
          "observed_inches": 40.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.wing-east-B1-lining.nominal-envelope-thickness",
          "wall": "wing-east-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 45.18,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            40.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-48"
            ],
            "40.48": [
              "r26-room-v3-62"
            ]
          },
          "source_basis": "A101 east-side lining continuity through upper rooms: nominal2in B1inside F2. Source B2begins at Bedroom3."
        },
        {
          "id": "basement.mech-south-B1-lining.normal-min",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.4,
          "observed_inches": 38.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.mech-south-B1-lining.normal-max",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 40.4,
          "observed_inches": 40.4,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.mech-south-B1-lining.nominal-envelope-thickness",
          "wall": "mech-south-B1-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 2.0,
          "observed_inches": 2.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 42.577500000000015,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.4,
            40.4
          ],
          "actual_face_ids_by_plane": {
            "38.4": [
              "r26-room-v3-88"
            ],
            "40.4": [
              "r26-room-v3-89"
            ]
          },
          "source_basis": "A101 paired south F2/B1leaders. Printed113.375in starts at F2face; source B1nominal2in gives111.375in occupied clear depth."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.normal-min",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 38.48000000000002,
          "observed_inches": 38.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.normal-max",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 42.48000000000002,
          "observed_inches": 42.48,
          "delta_inches": -2.1316282072803006e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bedroom3-east-B2-lining.nominal-envelope-thickness",
          "wall": "bedroom3-east-B2-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.0,
          "observed_inches": 4.0,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 379.865,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            38.48,
            42.48
          ],
          "actual_face_ids_by_plane": {
            "38.48": [
              "r26-room-v3-94"
            ],
            "42.48": [
              "r26-room-v3-102"
            ]
          },
          "source_basis": "A101 paired east F2/B2leaders: B2is nominal4in inside F2. Printed213.25in to F2face yields209.25in occupied clear width; source179SFlabel independently supports the resulting room area."
        },
        {
          "id": "basement.bath-south-finish-lining.normal-min",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 125.42499999999997,
          "observed_inches": 125.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-south-finish-lining.normal-max",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 129.42499999999998,
          "observed_inches": 129.425,
          "delta_inches": 2.842170943040401e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-south-finish-lining.nominal-envelope-thickness",
          "wall": "bath-south-finish-lining",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.000000000000014,
          "observed_inches": 4.000000000000014,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 252.5369,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            125.425,
            129.425
          ],
          "actual_face_ids_by_plane": {
            "125.425": [
              "r26-room-v3-118"
            ],
            "129.425": [
              "r26-room-v3-119"
            ]
          },
          "source_basis": "Source front finish/cabinet backing trace and nominal4in lining; particular B2assignment inferred here. Check against next designer/architect set."
        },
        {
          "id": "basement.bath-laundry-return.normal-min",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "normal-min",
          "expected_inches": 376.355,
          "observed_inches": 376.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "basement.bath-laundry-return.normal-max",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "normal-max",
          "expected_inches": 382.855,
          "observed_inches": 382.855,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "basement.bath-laundry-return.nominal-envelope-thickness",
          "wall": "bath-laundry-return",
          "level": "basement",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 6.5,
          "observed_inches": 6.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 167.66260000000003,
            "height_inches": 110,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            376.355,
            382.855
          ],
          "actual_face_ids_by_plane": {
            "376.355": [
              "r26-room-v3-124"
            ],
            "382.855": [
              "r26-room-v3-125"
            ]
          },
          "source_basis": "A101 actual black return edges, paths8102/8107/9559/9560, PDF page84 (one based). Printed chain governs inside X858.2925; continuous closure to existing foundation/partition. Nominal6.5in I1assignment is inferred, not a structural detail."
        },
        {
          "id": "main.registered-west-E1.normal-min",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 716.48,
          "observed_inches": 716.48,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-west-E1.normal-max",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 724.355,
          "observed_inches": 724.355,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-west-E1.nominal-envelope-thickness",
          "wall": "registered-west-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 150.1191,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            716.48,
            724.355
          ],
          "actual_face_ids_by_plane": {
            "716.48": [
              "house-face-17212"
            ],
            "724.355": [
              "facade-r8-103"
            ]
          },
          "source_basis": "Actual source inner finish X1368.48 and E1nominal7.875in. Primary outside finish X1380.24 gives7.84in by scaled graphics; nominal source schedule governs, within0.035in source rounding."
        },
        {
          "id": "main.registered-kitchen-south-E1.normal-min",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 134.925,
          "observed_inches": 134.925,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-kitchen-south-E1.normal-max",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 142.8,
          "observed_inches": 142.8,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-kitchen-south-E1.nominal-envelope-thickness",
          "wall": "registered-kitchen-south-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 514.3655000000001,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            134.925,
            142.8
          ],
          "actual_face_ids_by_plane": {
            "142.8": [
              "house-face-17206"
            ],
            "134.925": [
              "facade-r8-99"
            ]
          },
          "source_basis": "Actual source inner finish Y434.04 and E1nominal7.875in. Keep interior/cabinet/window positions; extend missing layers outward."
        },
        {
          "id": "main.registered-lake-E1.normal-min",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 500.87999999999994,
          "observed_inches": 500.88,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.registered-lake-E1.normal-max",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 508.75499999999994,
          "observed_inches": 508.755,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.registered-lake-E1.nominal-envelope-thickness",
          "wall": "registered-lake-E1",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 7.875,
          "observed_inches": 7.875,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 381.3207,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            500.88,
            508.755
          ],
          "actual_face_ids_by_plane": {
            "500.88": [
              "r26-gap589-v3-317"
            ],
            "508.755": [
              "r26-gap589-v3-339"
            ]
          },
          "source_basis": "A102 CW1/E1line, actual inner finish Y971.16 and outside Y982.92; nominalE1thickness7.875in. Upper/lower banks and all reveals retain their independently registered frames. Specific CWseparator/carrier detail remains pending."
        },
        {
          "id": "main.primary-WC-west.normal-min",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 138.85,
          "observed_inches": 138.85,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-west.normal-max",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 143.35,
          "observed_inches": 143.35,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-west.nominal-envelope-thickness",
          "wall": "primary-WC-west",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 0,
            "along_inches": 195.76999999999998,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            138.85,
            143.35
          ],
          "actual_face_ids_by_plane": {
            "143.35": [
              "bathroom-r28::nov03-3189"
            ],
            "138.85": [
              "bathroom-r28::nov03-3191"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.normal-min",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "normal-min",
          "expected_inches": 260.84999999999997,
          "observed_inches": 260.85,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.normal-max",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "normal-max",
          "expected_inches": 265.34999999999997,
          "observed_inches": 265.35,
          "delta_inches": 5.684341886080802e-14,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        },
        {
          "id": "main.primary-WC-front.nominal-envelope-thickness",
          "wall": "primary-WC-front",
          "level": "main",
          "quantity": "nominal-envelope-thickness",
          "expected_inches": 4.5,
          "observed_inches": 4.5,
          "delta_inches": 0.0,
          "status": "pass",
          "tolerance_inches": 0.0625,
          "tolerance_basis": "Nominal programme/source stroke and retained0.035in cosmetic skin; not field or construction tolerance.",
          "probe": {
            "axis": 1,
            "along_inches": 144.10999999999999,
            "height_inches": 145,
            "selection_rule": "Predeclared fraction/height order excluding source-defined openings and buried closed-junction faces, solely from the2Dprogramme; no observation-dependent swap.",
            "source_exclusions": []
          },
          "actual_planes_inches": [
            260.85,
            265.35
          ],
          "actual_face_ids_by_plane": {
            "260.85": [
              "bathroom-r28::nov03-3194"
            ],
            "265.35": [
              "bathroom-r28::nov03-3196"
            ]
          },
          "source_basis": "November3 I104WC38in clear,4.5in partition,28in door with5in jambs. Registered to current source finish origin without scaling."
        }
      ],
      "frames": [
        {
          "tag": "W100",
          "room": "bedroom2",
          "observed_inches": {
            "width": 25.0,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W101",
          "room": "bedroom2",
          "observed_inches": {
            "width": 99.00000000000001,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 99,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W102",
          "room": "bedroom2",
          "observed_inches": {
            "width": 99.00000000000001,
            "high-height": 96.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 99,
            "high-height": 96,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W103",
          "room": "primary-bathroom",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W104",
          "room": "primary-bathroom",
          "observed_inches": {
            "width": 72.00000000000003,
            "high-height": 96.0,
            "physical-depth": 5.625
          },
          "expected_programme_inches": {
            "width": 72,
            "high-height": 96,
            "physical-depth": 5.625
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W105",
          "room": "bedroom1",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W106",
          "room": "bedroom1",
          "observed_inches": {
            "width": 25.0,
            "high-height": 60.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 60,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W110",
          "room": "boot-room",
          "observed_inches": {
            "width": 25.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W111",
          "room": "powder-room",
          "observed_inches": {
            "width": 25.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W001",
          "room": "bedroom4",
          "observed_inches": {
            "width": 60.00000000000003,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W002",
          "room": "ensuite3",
          "observed_inches": {
            "width": 25.0,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W003",
          "room": "bedroom3",
          "observed_inches": {
            "width": 138.9375,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 138.9375,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W004",
          "room": "rec-room",
          "observed_inches": {
            "width": 145.125,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.125,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W005",
          "room": "rec-room",
          "observed_inches": {
            "width": 145.125,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.125,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W006",
          "room": "rec-room",
          "observed_inches": {
            "width": 27.0,
            "high-height": 80.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 80,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E002",
          "room": "lower-entry",
          "observed_inches": {
            "width": 70.625,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "expected_programme_inches": {
            "width": 70.625,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E004",
          "room": "rec-room",
          "observed_inches": {
            "width": 38.0,
            "high-height": 95.5,
            "physical-depth": 6.625
          },
          "expected_programme_inches": {
            "width": 38,
            "high-height": 95.5,
            "physical-depth": 6.625
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "E100",
          "room": "bedroom1",
          "observed_inches": {
            "width": 139.1875,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "expected_programme_inches": {
            "width": 139.1875,
            "high-height": 95.5,
            "physical-depth": 7.25
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W112",
          "room": "kitchen",
          "observed_inches": {
            "width": 144.0,
            "high-height": 54.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 144,
            "high-height": 54,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW100",
          "room": "bedroom1",
          "observed_inches": {
            "width": 47.3125,
            "high-height": 24.25,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 47.3125,
            "high-height": 24.25,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW101",
          "room": "bedroom1",
          "observed_inches": {
            "width": 44.5625,
            "high-height": 27.9375,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 44.5625,
            "high-height": 27.9375,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW102",
          "room": "bedroom1",
          "observed_inches": {
            "width": 47.3125,
            "high-height": 31.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 47.3125,
            "high-height": 31.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W109",
          "room": "greatroom",
          "observed_inches": {
            "width": 27.0,
            "high-height": 72.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 72,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW106",
          "room": "greatroom",
          "observed_inches": {
            "width": 60.0,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW107",
          "room": "greatroom",
          "observed_inches": {
            "width": 60.0,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 60,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW105",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 28.875,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW104",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 25.125,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 25.125,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "TW103",
          "room": "greatroom",
          "observed_inches": {
            "width": 45.5,
            "high-height": 21.375,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 45.5,
            "high-height": 21.375,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-west-lower",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 95.98425,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047247,
            "high-height": 95.98425196850394,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-west-upper",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 68.97637999999998,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047247,
            "high-height": 68.97637795275591,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-east-lower",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 95.98425,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047242,
            "high-height": 95.98425196850394,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "CW-east-upper",
          "room": "greatroom",
          "observed_inches": {
            "width": 145.11023,
            "high-height": 54.84252000000001,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 145.11023622047242,
            "high-height": 54.84251968503935,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Supplier-size programme; installation/detail holds separate",
          "status": "pass"
        },
        {
          "tag": "W007",
          "room": "rec-room",
          "observed_inches": {
            "width": 24.0,
            "high-height": 72.0,
            "physical-depth": 5.439999999999998
          },
          "expected_programme_inches": {
            "width": 24,
            "high-height": 72,
            "physical-depth": 5.44
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Primary baseline nominal opening, Nov11addition confirmed; actual updated supplier frame/profile unresolved",
          "status": "pass"
        },
        {
          "tag": "W108",
          "room": "greatroom",
          "observed_inches": {
            "width": 27.0,
            "high-height": 72.0,
            "physical-depth": 4.5
          },
          "expected_programme_inches": {
            "width": 27,
            "high-height": 72,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "Quoted nominal27x72casement /4.5in frame; centre from primaryA102jambs, mounting depth retained as explicit study registration",
          "status": "pass"
        },
        {
          "tag": "EST-B3-WOODS-01",
          "room": "bedroom3",
          "observed_inches": {
            "width": 25.0,
            "high-height": 36.0,
            "physical-depth": 4.5000000000000036
          },
          "expected_programme_inches": {
            "width": 25,
            "high-height": 36,
            "physical-depth": 4.5
          },
          "statuses": {
            "width": "pass",
            "high-height": "pass",
            "physical-depth": "pass"
          },
          "source_class": "owner-authorized estimated design position / matching proposed family size",
          "status": "pass"
        }
      ],
      "critical_openings": [
        {
          "id": "rec-room.E004.ICF-width",
          "expected_inches": 44,
          "observed_inches": 44.0,
          "actual_slice": {
            "width_inches": 44.0,
            "bounds": [
              281.8,
              50.0,
              325.8,
              50.0
            ],
            "normal_planes": [
              709.605,
              722.855,
              722.88992
            ]
          },
          "status": "pass"
        },
        {
          "id": "rec-room.E004.framed-width",
          "expected_inches": 39,
          "observed_inches": 39.0,
          "status": "pass"
        },
        {
          "id": "greatroom.E101.rough-width",
          "expected_inches": 131.75,
          "observed_inches": 131.75,
          "actual_slice": {
            "width_inches": 131.75,
            "bounds": [
              284.57,
              200.0,
              416.32,
              200.0
            ],
            "normal_planes": [
              716.48,
              724.355
            ]
          },
          "status": "pass"
        }
      ],
      "face_integrity": {
        "unique_face_ids": true,
        "face_count": 68103,
        "invalid_or_zero_faces": []
      },
      "whole_model_qualified": false,
      "image_generation_allowed": false,
      "owner_approval": null
    }
  ],
  "scope": "Actual geometry family expansion, not source completeness or whole-model qualification.",
  "observer_sha256": "28dfff47c100bf792093e31f9677550f6355615136a0e434ccc0f73516348769",
  "supersession": "Observer1probed one partition face buried in the exterior wall. The general source-only junction rule now excludes such points; the old failure remains history. Actual closed junctions require their separate union/plane checks.",
  "owner_approval": null
}
