{
  "date": "2026-11-11",
  "method": "Web research by a research subagent using public maker product pages and spec sheets, authorised-dealer listings (DWR, Hive, Innes, 2Modern, B&H, Artilleriet etc.), vintage-dealer listings and editorial/inspiration pages. No one was contacted; no accounts, credentials or purchases. Several maker sites (Kasthall, nanimarquina, Fjorn) rate-limited automated reads, so some details come from dealer copies and search extracts. Silhouettes combine published dimensions with the designs' well-known published photographs; they are modelling approximations to be checked against maker photos before a final model. Hex colours are approximate screen readings, not physical samples. Where sources disagree, the maker figure is preferred and the conflict is noted.",
  "not_verified": ["prices", "lead times", "physical colour of every wood, leather, fabric and rug colourway", "current availability of each wood/finish combination where marked 'confirm'", "fire/code compliance (needs the installed Rumford manual, Ontario Building Code and the installer/inspector)"],

  "A_dining_chairs": {
    "brief": "Replace rejected CH24 black (terrible), CH20 oak/cognac (better but not great) and round-1 office-looking chairs. Needs to read substantial, sculpted and residential, at a walnut table, 8 places.",
    "selected": {
      "name": "Finn Juhl 46 Chair (1947; House of Finn Juhl, model FJ 4652)",
      "count": "8 (option: 6 x 46 Chair + 2 x 46 Armchair at the table ends, same family)",
      "frame": "solid American walnut, oiled",
      "upholstery": "seat and separate back pad in aniline cognac/rust leather (approx #8A4A2B); alternative wool upholstery in olive (approx #6B6A3E) if leather on 8 chairs reads too heavy",
      "dims": "W 52 x D 53 x H 82 cm, seat height 44 cm (20.5 x 20.9 x 32.3 in, seat 17.3 in); DWR seat width 19.75 in",
      "silhouette": "Sculpted solid-wood frame with the upholstery visibly separate from it. Four legs of rounded, tapering section (~3.5 cm at the seat rail to ~2.5 cm at the foot); the front legs stand nearly vertical, the rear legs rake back below the seat and rise above it as two posts that lean back ~10-12 degrees. The back is a single horizontal, gently concave upholstered pad (~45 cm wide x ~18-20 cm tall, ~4 cm thick) held between the rear posts at shoulder-blade height, with an open gap between the pad and the seat. Seat: an upholstered slab ~6-7 cm thick, slightly wider at the front, sitting on top of slim side rails so it appears to float; small shadow gap between seat and rails. Low side stretchers between front and rear legs plus a cross stretcher (H-stretcher), all thin, rounded-rectangular sections. No arms on the 46 Chair; the 46 Armchair adds slim curved armrests rising from the front legs to the rear posts.",
      "colours": {"walnut_oiled": "#5A3A24", "leather_cognac": "#8A4A2B"},
      "why": "Hand-sculpted Danish joinery with a floating back and seat gives the substantial, crafted presence the CH24/CH20 lacked; no wishbone/hoop and nothing that reads office or café. Walnut matches the beams and kitchen; cognac/rust leather carries the pillow accent. Armless and 52 cm wide, so 8 fit around a 278 cm extended table.",
      "notes": "Premium price (DWR listed ~USD 6,746 per chair; not verified). Weight disagrees between listings (11-24 lb).",
      "sources": ["http://finnjuhl.com/collection/chairs/46-chair", "https://www.dwr.com/kitchen-dining-chairs-benches/46-dining-chair/100593697.html", "https://www.2modern.com/products/46-dining-chair", "https://www.mjolk.ca/46-chair-by-finn-juhl.html", "https://twentytwentyone.com/products/house-of-finn-juhl-finn-juhl-46-armchair"]
    },
    "alternative": {
      "name": "Niels O. Moller Model 62 Armchair (1962; J.L. Mollers, distributed by DWR in North America)",
      "frame": "solid walnut, hand-polished/oiled",
      "seat": "leather (cognac) or natural paper cord",
      "dims": "W 56 x D 55 x H 80 cm, seat 44 cm, arm 71 cm (22 x 21.75 x 31.5 in, seat 17.4 in, arm 28 in); DWR seat width 20.5 in, seat depth 18.5 in",
      "silhouette": "Solid-wood armchair: round-to-oval tapered legs, slight splay; rear legs continue up as posts carrying a broad, curved horizontal top rail that wraps the back (open below the rail, no splats or a single low rail); armrests are softly shaped flat-topped bars running from the rear posts forward over the front legs at 71 cm; thin upholstered or woven seat (~4 cm) on a four-sided seat frame; low side stretchers.",
      "colours": {"walnut": "#5E3D26", "leather": "#8A4A2B", "paper_cord": "#C8B48A"},
      "why": "Equally classic Danish, more generous and armed than CH20; calmer and more traditional than the Juhl.",
      "caution": "DWR notes the above-average arm height will not slide under most tabletops: 8 armchairs at 56 cm need a long table and will stand out from the table edge. Use 2 at the ends with the Moller Model 77 side chair (50 x 50 x 77 cm, seat 44 cm) on the long sides if chosen.",
      "sources": ["https://artilleriet.se/furniture/chairs_and_stools/chair-model-62", "https://www.dwr.com/kitchen-dining-chairs-benches/moller-model-62-armchair-with-leather-seat/5781-1.html?lang=en_US", "https://www.galerie-mobler.com/en/vintage-furniture/fauteuils-scandinave-modele-62-edition-neuve_3067", "https://artilleriet.se/brands/j-l-moller/chair-model-77-walnut"]
    },
    "considered_not_chosen": {
      "Wegner CH37": "paper-cord seat only (leather version is CH39); W58 x D50 x H81, seat 45 cm; Shaker character, lighter-looking",
      "Wegner CH47": "W50 x D51 x H79 cm, 7 kg; simple, close in feel to the rejected CH-series",
      "Finn Juhl Diplomat (209)": "vintage only (France & Son), 69 cm wide - too wide for 8"
    }
  },

  "B_rug": {
    "brief": "About 12 x 10 ft (custom ok), less dominant than Echo Ochre but not plain neutral; low-contrast geometric/multi-tone from rust/olive/charcoal/cream/soft blue; no mustard field.",
    "selected": {
      "name": "Kasthall Angsmark (Ilse Crawford, Gronska collection), woven",
      "colourway": "Juni 306 (green family; confirm against a physical sample). Other colourways: Januari 501, September 409, Oktober 810, Augusti 808, November 311 - request 810 and 306 samples side by side.",
      "construction": "hand-woven pure wool in Kinna, Sweden; thin, light flatweave ground of over-dyed melange yarn with interwoven white hair yarn appearing irregularly, crossed by lines of chenille yarn; backing recommended for woven rugs over 200 cm wide",
      "size": "custom: any width 70-600 cm, any length; specify 305 x 366 cm (10 x 12 ft)",
      "pattern_for_model": "Model as a flat rectangle 366 x 305 cm. Ground: mottled melange field, base #74784A (olive-sage) with ~15% speckle of #A9A77A and ~5% irregular cream flecks #E6DFCC. Overlay a gentle geometric structure of slightly raised chenille lines ~1 cm wide in a darker tone #4F5233: an orthogonal grid of large offset rectangles, cells ~40 cm (across width) x ~60 cm (along length), alternate rows offset by half a cell like stretcher-bond brickwork. Plain 4-5 cm self-coloured edge band all round. Overall contrast low (line vs ground ~1.5:1 luminance). Geometry is an approximation from maker photographs - verify cell size and line spacing before a final render.",
      "why": "Reads as a quiet coloured field with structure (meadow/field theme) rather than a graphic statement; olive ties to the kitchen counters and pillows, sits calmly between cream boucle and dark stone, no mustard. Not neutral, unlike the rejected plain flatweave.",
      "sources": ["https://www.kasthall.com/en-us/products/angsmark-306-juni-woven", "https://www.architonic.com/en/product/kasthall-ang/1537288", "https://www.architonic.com/en/product/kasthall-angsmark-augusti-808/20109041", "https://www.remodelista.com/posts/gronska-ilse-crawford-kasthall-rugs-sweden/", "https://nydc.com/wp-content/uploads/2016/09/Kasthall-Catalog_Ilse-Crawford-x-Kasthall-Gronska-Collection.pdf"]
    },
    "alternative": {
      "name": "nanimarquina Tres Texture (Nani Marquina and Elisa Padron), Sage or Chocolate",
      "construction": "hand-loomed dhurrie of three separately woven panels joined lengthwise; ~49-55% New Zealand wool + ~45% wool felt (+ cotton)",
      "size": "largest standard 300 x 400 cm (9'10\" x 13'1\"); custom sizes offered by dealers per sq ft with ~12-week lead",
      "pattern_for_model": "Rectangle 400 x 300 cm made of three equal panels 400 x 100 cm side by side (faint seam lines). Each panel carries stripes running ACROSS the panel (perpendicular to the long side) of varying width 2-25 cm, and the stripe sequences in neighbouring panels do not align, giving a staggered patchwork. Sage colourway approx: sage #8E9776 (~45%), grey-green #6E7560 (~25%), pearl/cream #DDD6C5 (~20%), slate #4E5050 (~10%). Chocolate colourway approx: cocoa #5B4033, rust-brown #8A5A3F, taupe #A39383, cream #DDD6C5. Texture alternates flat felt bands with ribbed wool bands.",
      "why": "Multi-tone, quiet, no large mustard area; three-panel striping is low contrast and hides wear in a cottage.",
      "caution": "Contemporary rather than period MCM; avoid the Ochre colourway (same mustard problem).",
      "sources": ["https://us.nanimarquina.com/collections/tres-texture", "https://nanimarquina.com/en/products/tres-texture", "https://hauslondon.com/collections/textiles/products/tres-texture-rug-by-nanimarquina", "https://jangeorge.com/products/tres-texture"]
    },
    "considered_not_chosen": {
      "nanimarquina Blur (Bouroullec)": "max 200 x 300 cm; colourways green/red/black only",
      "Kasthall Ingrid Icon": "knitted-sweater texture, good custom sizing, but the colourways are two-tone pairs (e.g. Red-white, Green-white) that read busier",
      "Christopher Farr custom": "will produce any design to colour/size (hand-knotted 25-30 weeks); use if the owner prefers a bespoke MCM geometric"
    }
  },

  "C_cast_iron_hearth_bench": {
    "brief": "Very heavy freestanding black steel/cast-iron box bench, 66 W x 25 D x 16 H in, cushion on top, open bays for split firewood, removable seasonally (2-person carry to basement), in front of a raised Rumford.",
    "precedents": [
      {"name": "Stefan Traloc Firewood Bench (Germany/Netherlands, 2010 design)", "notes": "140 x 52.5 x 20 cm (listing ambiguous on height/depth), ~22 kg, 25 x 25 mm square tube, untreated oak seat; customisation and stainless versions offered", "url": "https://www.1stdibs.com/art/more-art/stefan-traloc-firewood-bench-140cm-unique-modern-outdoor-ornament-stefan-traloc/id-a_15977302"},
      {"name": "Nickey Kehoe Blackened Steel Firewood Holder (handmade, Los Angeles)", "notes": "blackened-steel finish precedent; ~USD 1,400 listed", "url": "https://nickeykehoe.com/products/blackened-steel-firewood-holder"},
      {"name": "Lance Thompson made-to-order patinated-steel firewood holders (Brooklyn)", "notes": "any size and finish", "url": "https://www.1stdibs.com/furniture/building-garden/fireplace-tools-chimney-pots/made-to-order-firewood-holder-small/id-f_39238002"},
      {"name": "Esschert Design / generic steel bench with wood storage", "notes": "mass-market form precedent only (open bays under a slab seat)", "url": "https://www.esschertdesign.com/en/shop/articles/rectangular-bench-with-wood-storage"}
    ],
    "recommended_construction": {
      "fabricator": "local architectural metal fabricator (same shop as the black steel bookcase/beam accents so finishes match); a one-off box bench is a simple welded job",
      "form_for_model": "Closed rectangular box 66 x 25 x 16 in. Top: one plate 66 x 25 in. Two end panels full height. Two internal vertical dividers creating three equal open bays (~21 in each) open to the room side; a closed back panel (or open both sides if it floats in the room). Bottom plate inset 1/2 in above the floor on four foot pads so the box reads as a lid floating 1/2 in above the hearth. All outside corners welded and ground to a crisp ~1/16 in radius.",
      "plate": "top 3/16 in (4.8 mm) hot-rolled plate with a folded or welded 1 in down-turn so the visible edge reads 1 in thick but stays light; ends, dividers and back 11-gauge (1/8 in, 3.0 mm); bottom tray 11-gauge, removable or omitted",
      "weight_estimate": "approx steel weight (0.2836 lb/in3): 3/16 top ~88 lb; two 1/8 ends ~28 lb; back ~37 lb; two dividers ~27 lb; bottom ~59 lb = ~240 lb (109 kg) empty with bottom, ~180 lb without bottom. Heavy and planted, but beyond a comfortable 2-person stair carry (~60-70 lb each limit is a sensible target).",
      "removability_recommendation": "Build as TWO bolt-together 33 in modules (~90-120 lb each) joined by hidden bolts through the centre divider, or keep one piece and add 4 recessed lifting slots plus use a furniture dolly/stair-climber. Always empty the firewood first: full bays (~14 ft3 at ~25-30 lb/ft3 stacked hardwood) could add 350-400 lb.",
      "firewood_fit": "16 in split logs stack front-to-back in a 24 in-deep bay with end grain to the room (matches r2 firewood note).",
      "feet_glides": "four 2 x 2 in pads: 1/4 in UHMW-PE or PTFE slider discs bonded/screwed into welded threaded bosses, or felt-faced nylon levelling glides (adjustable 1/4 in for an uneven hearth). Never bare steel on stone: abrasion plus rust staining.",
      "top_edge": "eased ~1/16 in radius, no sharp arris (shins, cushion piping)",
      "finish": {
        "recommended": "matte black powder coat matching the window frames/bookcase (e.g. RAL 9005 matte or fine texture). The bench sits beyond the hearth extension and should not see high temperature; a high-heat silicone powder (rated ~600-1000 F) is an inexpensive extra margin if it sits closer.",
        "alternative": "hot-rolled steel, chemically blackened then sealed with paste wax (e.g. microcrystalline wax): richer, more artisanal look, but wax softens with radiant heat, rubs off onto firewood/clothes and the finish can rust in a damp cottage - needs periodic re-waxing."
      },
      "cast_iron_note": "True cast iron would need a pattern and foundry, is brittle if dropped on stairs, and far heavier; fabricated steel gives the same look."
    },
    "cushion": {
      "fabric_confirmed": "Maharam Wool Velvet 466120, 003 Flagstone: 100% wool face (backing cotton/polyester/rayon), CAL 117-2013 per Maharam spec. Confirmed as a good choice.",
      "fill": "wool-wrapped CAL 117-compliant HR foam, 3 in, or a wool-batting-only mattress-style cushion; CAL 117 compliance of the finished cushion depends on the fill and liner too",
      "alternative": "Kvadrat Divina 3 (100% new wool, CAL 117-2013) in a sage or rust colour, but flagged as an outgoing line in r2",
      "sources": ["https://www.maharam.com/product_pdfs/wool-velvet/specifications", "https://www.maharam.com/maharam/products/wool-velvet/colors/003-flagstone"]
    },
    "fire_safety": [
      "Code hearth extension (older IRC wording reproduced by Buckley Rumford): at least 16 in in front and 8 in each side of openings < 6 ft2; 20 in front and 12 in each side for larger openings. Keep the bench and cushion entirely outside this zone.",
      "Recommended (not code): >= 36 in clear from the firebox opening to the bench face whenever a fire burns, with a mesh screen in place; on a raised Rumford, check sparks reaching the bench top.",
      "Lift the cushion off and store it away from the hearth before lighting; do not dry or store kindling/paper in the bays.",
      "Wool resists ignition but is not fireproof; the stored firewood is fuel - sweep bark/debris from the bays regularly.",
      "Confirm with the actual Rumford installation manual, the Ontario Building Code and the local inspector."
    ],
    "fire_sources": ["https://www.rumford.com/code/clearances.html", "https://finehomebuilding.com/2023/01/11/code-requirements-for-fireplace-clearances", "https://rumford.com/code/IRC01.html"]
  },

  "D_frame_tv_easel": {
    "selected": {
      "name": "Samsung 2021 Studio Stand VG-SESA11K/ZA (current Studio Stand for The Frame 2020+)",
      "dims": "100.0 x 67.6 x 103.2 cm (39.36 x 26.6 x 40.61 in, as listed by Samsung/B&H); 4.7 kg (10.4 lb); VESA 200x200 / 400x300 / 400x400; max load listed 50 kg; up to 65 in",
      "look": "slim black metal tripod easel: two front legs and a single rear leg, TV held on a central mast so the screen leans back like a canvas on an easel",
      "movable": "light enough to lift and move by one or two people with the TV removed; not on castors - not designed to roll",
      "caution": "the older VG-STSM11B (2017; 20.6 x 18.8 x 36.6 in, 21.6 lb) fits 2017-2019 Frames only; one user reports wobble with a 65 in, and another reported a Studio Stand not holding a 65 in Frame - confirm compatibility with the exact Frame model year.",
      "sources": ["https://www.samsung.com/us/televisions-home-theater/television-home-theater-accessories/televisions/2021-studio-stand-vg-sesa11k-za", "https://www.bhphotovideo.com/c/product/1619670-REG/samsung_vg_sesa11k_za_studio_stand_sesa11k.html", "https://image-us.samsung.com/SamsungUS/home/televisions-and-home-theater/television-and-home-theater-accessories/pdp/VG-STSM11B-ZA/pdf/Specs_TV_Accessory_VG-STSM11B_StudioStand_040417.pdf"]
    },
    "alternative": {
      "name": "VIVO Artistic Easel STAND-TV65A (dark walnut wooden legs, black bracket) or STAND-TV65AW",
      "look": "A-frame wooden tripod in dark walnut with a black steel mount; closer to the walnut/black palette than Samsung's all-black",
      "capacity": "45-65 in; manual limits 70.4 lb on normal floors / 55 lb on glossy floors (TV65AW up to 77 lb)",
      "movable": "lift-and-place; no castors",
      "caution": "consumer-grade; confirm VESA pattern for The Frame's slim-fit bracket.",
      "sources": ["https://www.walmart.com/ip/1139578945", "https://www.desertcart.nl/products/87713738-vivo-artistic-easel-45-to-65-inch-led-lcd-screen"]
    },
    "rolling_option": "If it must roll, use a low-profile rolling TV cart with lockable castors (e.g. Salamander/Chief class) rather than an easel; it loses the gallery-easel look.",
    "other_sources": ["https://uk.fitueyes.com/products/picasso-tv-easel-for-43-65-qled-the-frame-tvs-samsung"]
  },

  "E_framed_lounge_chair": {
    "selected": {
      "name": "Hans J. Wegner GE 290 Easy Chair (1953; Getama, made to order)",
      "frame": "oiled oak (standard) or walnut (vintage examples exist; confirm current Getama walnut availability)",
      "upholstery": "loose seat and back cushions in olive wool (e.g. Kvadrat Hallingdal-type wool weave or Maharam wool in olive, approx #6B6A3E) or cognac leather to match the dining seats",
      "dims": "approx W 75-76 x D 78-87 x H 64-91 cm (low back vs high back), seat ~40 cm (approx 29.9 W x 31-34 D x 25-36 H in, seat 15.75 in) - listings conflict, get Getama spec",
      "silhouette": "Low, wide plank-arm chair. Two side frames, each a ladder of a straight front leg and a back leg joined by a broad, flat, horizontal armrest plank (~9-10 cm wide, ~2.5 cm thick) that runs full depth and overhangs slightly at the front; armrests 'float' just above the cushions. Back legs rake back ~15 degrees above the seat. Seat and back are separate rectangular cushions (~10-12 cm thick) resting on a sprung/strapped frame: seat cushion ~60 x 55 cm, back cushion ~60 x 45 cm (low back), slightly reclined ~105 degrees. Low rails connect the side frames front and back; overall a calm boxy outline with exposed timber at the arms and legs.",
      "colours": {"oak_oiled": "#B98D5E", "walnut_option": "#5A3A24", "olive_wool": "#6B6A3E"},
      "why": "~30 in wide, framed and low, easy to sit in by the fire; plank arms echo the heavy steel bench below the hearth without competing with the boucle sofas.",
      "sources": ["https://twentytwentyone.com/products/290-armchair-1953", "https://www.archiexpo.com/prod/getama-danmark/product-65291-287203.html", "https://chairish.com/product/25632918/ge-290a-lounge-chair-in-walnut-by-hans-wegner-1980s", "https://www.1stdibs.com/furniture/seating/lounge-chairs/hans-wegner-oak-lounge-chair-ge-290/id-f_31166312"]
    },
    "alternative": {
      "name": "Finn Juhl 45 Chair (1945; House of Finn Juhl)",
      "frame": "solid walnut",
      "upholstery": "leather or fabric; suggest olive wool or cognac leather",
      "dims": "W 26 x D 29 x H 35 in (66 x 74 x 89 cm) per DWR",
      "silhouette": "Sculptural: armrests are sculpted wooden blades that swell and float free of the seat; the upholstered seat and back are separate floating panels suspended within the frame; slim tapering legs, the front ones flaring outward; a low cross-stretcher.",
      "why": "The most celebrated MCM framed lounge chair; ties to the Finn Juhl 46 dining chairs.",
      "sources": ["https://www.dwr.com/living-lounge-chairs/model-45-chair/6297.html", "https://rarify.co/products/45-lounge-chair-finn-juhl-house-of-finn-juhl-25052202"]
    }
  },

  "F_game_corner": {
    "table_selected": {
      "name": "Eero Saarinen Round Dining Table 35 in (Knoll)",
      "top": "Light Walnut veneer (Ebonized Walnut also offered)",
      "base": "black cast-aluminium pedestal (Rilsan finish)",
      "dims": "diameter 35.75 in (90.8 cm), H 28.25 in (71.8 cm), base diameter 20 in (50.8 cm); ~95 lb (stone/laminate listing)",
      "silhouette": "round top with a thin knife edge (~2 cm visible); single tulip pedestal flaring smoothly from a narrow stem (~12 cm) into a round base 50.8 cm; no legs, so two chairs slide in at any angle",
      "why": "Compact, no legs to bump in a window corner, MCM icon; black base repeats the black steel and walnut top repeats the joinery. Seats 2 (DWR) - right for Scrabble/puzzles.",
      "sources": ["https://www.knoll.com/product/saarinen-dining-table-round", "https://www.dwr.com/kitchen-dining-tables/saarinen-dining-table-round/290524.html", "https://www.knoll.com/document/1356759583274/KNL23-Cutsheet-Studio-ProductDetail-SaarinenDiningSideCoffeeTable.pdf"]
    },
    "chairs_selected": {
      "name": "Niels O. Moller Model 77 side chair (1959; J.L. Mollers), x2",
      "frame": "walnut, hand-polished",
      "seat": "cognac leather or natural paper cord",
      "dims": "W 50 x D 50 x H 77 cm, seat 44 cm (19.75 x 19.75 x 30.4 in, seat 17.4 in); ~9 lb",
      "silhouette": "light, small Danish side chair: four round tapered legs; rear legs curve up into two posts holding a single wide curved horizontal back rail (~8 cm tall) at shoulder height, open below; thin seat (~4 cm) on a four-sided frame; low side stretchers",
      "why": "Small footprint, light enough to pull up anywhere; walnut + cognac ties to the dining family without matching it exactly.",
      "sources": ["https://artilleriet.se/brands/j-l-moller/chair-model-77-walnut", "https://www.dwr.com/kitchen-dining-chairs-benches/moller-model-77-side-chair-leather-seat/6315-2.html?lang=en_US"]
    },
    "footprint": "table 91 cm + chairs pulled out ~45 cm each side: ~185 x 140 cm (73 x 55 in) zone with two chairs facing",
    "alternative": "Wegner CH23 in oiled walnut with natural cord (50.5 x 50.5 x 78.5 cm, seat 44.5 cm; from r2) as the chairs, and a square 80 x 80 cm walnut table if a square game surface is preferred (no current maker verified)."
  },

  "G_island_stool_homes": {
    "precedents": [
      {"name": "Minarc 'HIDDenSit' concept: stools that disappear into the island", "url": "https://pipedot.org/5HTS7"},
      {"name": "Houzz: recessed niche hidden behind the island side panels where stools slide in", "url": "https://www.houzz.com/magazine/6-new-kitchens-with-clever-island-seating-ideas-stsetivw-vs~163966272"},
      {"name": "Domino: hide cabinet doors under the counter lip / handle cut-outs instead of hardware", "url": "https://www.domino.com/content/kitchen-islands-with-seating-and-storage/"},
      {"name": "Push-to-open hidden island doors (knee-trigger caution)", "url": "https://sawdustgirl.com/kitchen-island-with-hidden-cabinet-doors/comment-page-1"}
    ],
    "stool_selected": {
      "name": "Karakter Principal Stool, counter height (Bodil Kjaer)",
      "frame": "solid American walnut, clear lacquer",
      "seat": "upholstered round seat in leather (Sorensen leather, cognac approx #8A4A2B) or Kvadrat wool; CAL 117 foam per dealer spec",
      "dims": "seat height 65 cm (25.6 in); seat diameter ~43-44 cm (17 in) - confirm counter-version footprint and footrest",
      "silhouette": "backless round upholstered seat pad (~5-6 cm thick) on four slender round walnut legs with slight splay; a ring or four-rail footrest ~25-30 cm below the seat",
      "colours": {"walnut": "#5A3A24", "leather": "#8A4A2B"},
      "sources": ["https://aplusrstore.com/products/karakter-principal-stool", "https://www.1stdibs.com/furniture/seating/chairs/bodil-kjaer-walnut-principal-counter-stool-karakter/id-f_41709412", "https://www.chairish.com/product/22281454/walnut-principal-counter-stool-by-bodil-kjaer-for-karakter"]
    },
    "stool_alternative": {
      "name": "Fritz Hansen Dot High Stool (Arne Jacobsen, 1950s)",
      "dims": "H 65 cm, seat diameter 44 cm (25.6 x 17.3 in)",
      "silhouette": "round padded seat on three slender legs with a footring; ask for black powder-coat legs (chrome listed) to suit the black steel accents",
      "sources": ["https://www.finnishdesignshop.com/en-us/product/dot-high-stool-walnut-leather-chrome"]
    },
    "cubby_clearances": {
      "counter": "36 in (91.4 cm) finished height; stools 24-26 in seat height suit it",
      "clear_height": ">= 27 in (68.5 cm) inside the cubby for a 65 cm stool (+3.5 cm); available is ~31-32 in under a 3 cm stone top and 3/4 in substrate",
      "clear_width_per_stool": ">= stool footprint at the feet + 1 in each side: ~20-21 in (51-53 cm) for a ~46-48 cm splayed footprint",
      "clear_depth": "stool footprint + ~1 in behind the closed door: ~20 in (51 cm); a 24 in island end can hold one stool per bay front-to-back",
      "floor": "no toe-kick or bottom shelf in the cubby: finished floor runs in so stools slide straight in; add a felt/UHMW wear strip",
      "doors": "inset flush walnut doors, grain-matched with the island end; integrated finger pull or push-to-open; 165-170 degree hinges (or pocket/flipper doors) so the door clears the stool path",
      "ergonomic_note": "With no overhang there is no knee space: people will sit sideways or pulled back from the counter. A 12 in overhang is commonly cited as minimum and 15 in as comfortable for counter seating - confirm the owner accepts perching-only use."
    },
    "other_sources": ["https://www.houzz.com/discussions/5232098/to-overhang-or-not-to-overhangfor-one-chair-help-please", "https://finehomebuilding.com/project-guides/kitchens/common-house-design-problems-ingeniously-solved"]
  },

  "H_extendable_dining_table": {
    "selected": {
      "name": "Finn Juhl Nyhavn Dining Table, extendable (1953; House of Finn Juhl)",
      "top": "walnut",
      "base": "black painted steel frame/legs with walnut feet",
      "dims": "closed L 170 x W 85 x H 72.5 cm (66.9 x 33.5 x 28.5 in); extended 278 cm (109.4 in) with two end leaves",
      "extension": "two drop leaves on special brackets at the ends; leaves can be removed or hung vertically at each end",
      "seating": "6 closed, 8-10 extended (10 tight at 85 cm width)",
      "silhouette": "Thin rectangular walnut top (~2.5-3 cm edge) on a slender black steel frame: four straight, slim rectangular-section steel legs set in from the corners, joined by a thin steel apron; each leg ends in a short turned walnut foot/shoe. Leaves attach to the short ends on hidden steel brackets.",
      "colours": {"walnut": "#5A3A24", "steel_black": "#1C1C1C"},
      "why": "Exactly the room's 'walnut table with black steel base', by the same designer as the selected 46 chairs, and it extends from 6 to 8-10.",
      "notes": "Width 85 cm is narrow-ish for armchairs at the ends; 46 Chair side chairs work. Made to order ~8 weeks (UK dealer).",
      "sources": ["https://finnjuhl.com/collection/dining-tables/nyhavn-dining-table/", "https://www.2modern.com/products/nyhavn-extendable-dining-table", "https://www.aram.co.uk/products/nyhavn-dining-table-extendable-walnut-top", "https://www.skandium.com/products/nyhavn-dining-table-with-2-leaves"]
    },
    "alternative": {
      "name": "Hans J. Wegner CH338 (Carl Hansen & Son), walnut oil, prepared for 2 or 4 leaves",
      "dims": "closed 200 x 115 x 72 cm (78.7 x 45.3 x 28.3 in); leaves 115 x 60 cm each (+23.6 in); about 320 cm with 2 leaves and 440 cm with 4 (arithmetic inference, confirm with Carl Hansen)",
      "silhouette": "all-wood: top with softly elliptical (half-oval) ends, thin edge, four round tapered legs set inboard; pull-out frame for leaves; optional extra support leg",
      "why": "Wider and more generous; all-walnut rather than steel base.",
      "notes": "Only the first leaf is cut from the same wood as the top.",
      "sources": ["https://www.carlhansen.com/en/en/collection/tables-desks/dining-tables/ch338/table-115-x-200-oak-oil-for-4-leaves-excl.-fsc70/variant/10178", "https://twentytwentyone.com/products/carl_hansen_and_son_hans_wegner_ch388_dining_table", "https://reevela.com/products/ch338-dining-table-from-carl-hansen-son-walnut-lacquer-pull-out-for-2-leaves-incl-1-wooden-support-leg-in-black"]
    },
    "considered_not_chosen": {"Carl Hansen CH006": "138/236 x 90 cm drop-leaf; oak/beech only", "Carl Hansen BM0121": "round 120 cm, oak only", "vintage Moller Model 10B walnut": "63 x 35.5 in + 2 x 15.75 in leaves; vintage-only"}
  },

  "I_pin_lights": {
    "recommendation": "1 in aperture LED pinhole/micro downlights in a matte black finish for the pale plank ceiling (small black dots read like intentional details; white or brass reads as patches). Prefer kits with a wood-compatible flangeless/mud-in plate, or a tiny flanged black trim where the installer cannot rebate the planks.",
    "products": [
      {"name": "Lucifer Lighting Atomos Slim 1 in LED Round Pinhole kit", "aperture": "1 in", "notes": "trimless options stated for drywall, wood or plaster; includes mud-in plate and new-construction housing; dimming sold separately; white with black trim versions", "url": "https://www.lumens.com/atomos-slim-1-inch-led-round-pinhole-recessed-kit-by-lucifer-lighting-LCFP527130.html?cgid=11059"},
      {"name": "WAC Aether Atomic Round Pinhole R1ARPL-BK", "aperture": "1 in", "finish": "black", "output": "~450-800 lm", "url": "https://ctlighting.com/aether-atomic-pinhole-r1arpl/"},
      {"name": "WAC Aether Atomic Downlight Trimless R1ARDL", "aperture": "1 in", "url": "https://ctlighting.com/aether-atomic-downlight-trimless-r1ardl/"},
      {"name": "Elco 1 in Round Architectural 'Oak' Trimless E1AK61F30BB", "aperture": "1 in", "finish": "black", "output": "900 lm 3000K 38 deg", "notes": "needs Elco spackle frame; compatible with ceilings up to 1-1/4 in thick", "url": "https://www.zoro.com/elco-lighting-1in-round-architectural-oak-trimless-downlight-900lm-3000k-38-degrees-black-e1ak61f30bb/i/G916154658"},
      {"name": "Luminii Stenos 1 in square trimless", "aperture": "0.85 in", "url": "https://www.luminii.com/?p=6928"},
      {"name": "Alcon 12100-23 2 in trimless linear for wood ceilings", "notes": "IC rated, specific wood-ceiling trimless mount; linear rather than round", "url": "https://alconlighting.com/alcon-12100-23-commercial-linear-recessed-light.html"}
    ],
    "install_notes": "Check plank + strapping thickness against each housing's maximum ceiling thickness, IC/airtight rating for insulated ceilings, and use 2700-3000K, CRI 90+. Lay out on plank centres and align with beam bays so holes never land on a plank joint."
  },

  "J_coffee_bar": {
    "precedent": {"name": "Mid-century bar in Larchmont (Houzz): wet bar in a living-room niche, flat walnut slab doors, side walls, ceiling and backsplash wrapped in the same walnut veneer, fieldstone fireplace nearby", "url": "https://www.houzz.jp/photos/phvw-vp~186862424"},
    "other_inspiration": ["https://www.houzz.co.uk/photos/midcentury-home-bar-with-medium-wood-cabinets-ideas-and-designs-phbr2-bp~t_12304~s_2215~a_17-123", "https://www.houzz.co.nz/photos/midcentury-living-room-design-photos-with-a-home-bar-phbr2-bp~t_10702~s_2315~a_34-478"],
    "recommended_design": {
      "overall": "74 in L x 24 in D base run in the alcove, counter at 36 in (match kitchen) or 34-35 in for a lower credenza feel",
      "carcass": "walnut veneer, flat slab inset or full-overlay doors with continuous horizontal grain match across the run; 3-4 in recessed black toe-kick (or black steel plinth) to echo the steel accents",
      "pulls": "integrated routed finger pulls along the top edge or short black/walnut tab pulls (MCM credenza detail); no bar pulls",
      "top": "3 cm (1-1/4 in) olive-green stone matching the kitchen counters, eased edge, 1/2 in front overhang; optional 4-6 in stone back upstand or full-height stone/walnut backsplash",
      "layout_example": "15 in panel-ready undercounter beverage fridge | 18 in sink base with ~15 x 15 in undermount bar sink | 24 in drawer bank (cups, beans, grinder) | 17 in door cabinet for the espresso machine accessories; or replace the sink with a dry bar and a 24 in drawer fridge",
      "above": "floating walnut shelf or black steel shelf brackets with 1-2 open walnut shelves; a single opal globe pendant or LED strip under the shelf",
      "services": "dedicated 20 A circuit for espresso machine; water and drain for sink/plumbed espresso; ventilation clearance for the fridge per its manual",
      "dims_in_cm": "188 L x 61 D x 91 H cm base"
    }
  },

  "owner_approval": null
}
